Wheel Hub Adapter Spacer Set by H&R 57.1mm to 66.5mm (5x100 | 112)

Wheel Hub Adapter Spacer Set by H&R 57.1mm to 66.5mm (5x100 | 112)Set includes two spacers Finally a solution from H&R for thin spacers with a lip to get rid of the annoying vibration commonly found when using spacers with no hub lip. For the 8mm and 10mm these also allow for a spacer with a lip to be used with ALL aftermarket wheels with hubcentric rings (currently the hubcentric rings DO NOT fit flush with H&R 8mm and 10mm spacers with lips, ONLY OEM wheels can be used with them. Most aftermarket wheels use a

Set includes two spacers 


Finally a solution from H&R for thin spacers with a lip to get rid of the annoying vibration commonly found when using spacers with no hub lip.

For the 8mm and 10mm these also allow for a spacer with a lip to be used with ALL aftermarket wheels with hubcentric rings (currently the hubcentric rings DO NOT fit flush with H&R 8mm and 10mm spacers with lips, ONLY OEM wheels can be used with them. Most aftermarket wheels use a large hub and plastic hubcentric rings. When used with these HUB adapters from H&R you can use different sized hubcentric rings and they will mount perfectly and you will have NO vibration. For more details on how this will work give us a call.

These TRAK+ hub adapters convert your early style 57.1mm hub to the later 66.5mm wheel hub which allows perfect wheel alignment onto the hub eliminating any wheel vibrations. Made from high grade aluminum, they are drilled for 5x100 and 5x112 bolt pattern. These are available in three thicknesses (5mm, 8mm, and 10mm). H&R part numbers 1055571665, 1655571665 or 2055571665

IMPORTANT: These spacers can ONLY be used with OEM or Aftermarket wheels with a hub size larger than or equal to 66.5mm

NOTE: Longer wheel bolts are required (optionally add them with the drop down menu above).

 

H&R was founded by Werner Heine and Heinz Remmen in the 1970's with a simple idea in mind; with improved suspension, vehicles would have more control and better handling.