SKU: 5867883662

COMP Cams Valve Locks 7 Deg W/5.5MM Ste - Set of 100

Sale price$128.70 Regular price$143.00
Save 10%

Pay in installments of $35.75 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 22 - Jul 27

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

COMP Cams Valve Locks 7 Deg W/5.5MM Ste - Set of 100Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running, but this isn't the case. The cross section of material in the tang is not strong enough to withstand open spring loads of 1000 lbs. or more. The sole purpose of the tang is to temporarily locate the lock, retainer and spring relative to the valve until the taper of the retainer can nest around the outside surface of the lock.

Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running, but this isn't the case. The cross-section of material in the tang is not strong enough to withstand open spring loads of 1000 lbs. or more. The sole purpose of the tang is to temporarily locate the lock, retainer and spring relative to the valve until the taper of the retainer can nest around the outside surface of the lock. This creates a collet effect that binds the two together. The more spring force exerted on the retainer (as the valve opens), the more force applied by the collet effect to keep the retainer and lock in place. With the emergence of valve sizes other than the standard 5/16", 11/32" and 3/8", it is important to make sure the valve locks match the valve size. There should always be a small gap between the two halves of the lock when they are properly positioned on the valve stem. If the two halves fit together without a gap, they are too large. If the locks fit tight to the stem and leave a gap between the middle of the lock and the O.D. of the stem, the locks are too small. Our line of stock replacement 7 valve locks for stock engine rebuilds are recommended only for street applications with lighter valve spring loads and are stamped and hardened for superior wear resistance. Also available are machined 7 locks and titanium Super 7 Locks for some applications. They offer the same valve spring location accuracy as our Super Locks without the need to change to 10 degree retainers.
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 5867883662

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.0 ★★★★★
Based on 16 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
W
Verified Purchase
Waleed Shipp
Birmingham, US
★★★★★ 2
Eufy dropped the ball on this vacuum
Style: L50 SES
I’ll start by saying the reason I purchased this vacuum, is because I have a Eufy 25c robot vacuum that is very dependable. I decided I wanted an upgrade because the 25C was great for cleaning, but I had to empty it way too often. I just knew I would love the L50 SES. I thought it was just what I was looking for a self emptying robot vacuum with a 60 day fill capacity. Allowing 2 months before I needed to touch my vacuum. Here’s where things went wrong. I never got a chance to test the vacuum because it wouldn’t connect to my WiFi and I tried everything. Now this wouldn’t have been a problem if the L50 came with a remote control like the 25C. Unfortunately I had to rely on the App and since the L50 couldn’t connect to my WiFi, I couldn’t control the vacuum. The reason I gave 2 stars is because the customer service at Eufy is awesome. I was given the option to replace the vacuum with a new one but after researching the L50 i decided to return it for a refund. Apparently this model has a defect, because I found so many negative reviews about the same issue with the same model. The thing is I never read reviews because I have a Eufy smart scale, 25C robot vacuum and an Eufy security system and everything works perfectly. So in the end I purchased a Shark Matrix Self emptying robot vacuum and a Shark self emptying stick vacuum. If Shark’s vacuum preforms well, Eufy might have lost a valued customer. I hope this review helps someone make a informed decision. By the way Eufy self emptying vacuum needs replacement bags and the Shark Matrix robot vacuum doesn’t need bags. I will say the suction and design on the Eufy L50 SES was great.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 15, 2025
I
Verified Purchase
Ilya
Lowell, US
★★★★★ 5
Much better than the old model.
Style: L50 SES
I had an old s11 that finally died. This one is much better. It maps the house and follows a snake pattern. Once the mapping is finished you can select what rooms you want to clean. I like the self emptying feature. Plenty of battery life.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 19, 2024
B
Verified Purchase
Bennett
Waukegan, US
★★★★★ 3
Good performance, flaky Wi-Fi connection
Style: L50 SES
The L50 physically works great - it does a good job of picking up dust and dirt at the end of the day. The pathfinder and route planning algorithm is fairly efficient at determining the best way to clean a room. Sometimes it kicks around bits of dust with its spinning brush without picking it up, but it's not often. What has been terrible, however, is the Wi-Fi support. Since our provider disabled 2.4 GHz support from their router modem without notice, I use a Mac Mini to supply the 2.4 GHz signal, and even though the Eufy is next to it and my phone gets full signal strength, it still can't connect to it half the time. After it fails to connect, it needs to be restarted or even reset to try to get the connection again. Support doesn't seem to be helpful in offering a solution.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 23, 2026
C
Verified Purchase
cecilia pena
Chelsea, US
★★★★★ 5
Perfect Replacement Roller Mop for Eufy Robot Vacuum
This replacement roller mop fits perfectly and works just like the original. Installation was quick and easy, and the quality feels durable and well-made. It does an excellent job picking up dust and light debris while providing consistent floor cleaning performance. The roller is washable, easy to maintain, and holds up well after multiple cleaning cycles. I appreciate that it restores the robot’s cleaning effectiveness without any compatibility issues. If you own a compatible Eufy model and need a replacement, this is a reliable option that keeps your robot performing at its best. Highly recommended for maintaining optimal cleaning results.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 30, 2026
G
Verified Purchase
Grandma of 5
Omaha, US
★★★★★ 5
Fit perfectly
Fit perfectly!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 12, 2026

recommand products