APEX EC-7 | 18" x 8.5" ET45 | 5x120mm | 72.56mmAPEX Race Parts designs and manufactures high performance, flow formed and forged wheels for a growing list of vehicle makes. They are constantly expanding their product line with new wheel designs, wheel accessories and other performance and race parts. It is their mission to produce and distribute high quality performance parts that meet the demands of racing and street performance enthusiasts. FOR WHEEL FITMENT GUIDE https: apexwheels. com fitment
APEX Race Parts designs and manufactures high performance, flow-formed and forged wheels for a growing list of vehicle makes. They are constantly expanding their product line with new wheel designs, wheel accessories and other performance and race parts. It is their mission to produce and distribute high-quality performance parts that meet the demands of racing and street performance enthusiasts.
ModelEC-7 Wheel QuantitySold Individually Wheel Diameter18" Wheel Width8.5" OffsetET45 Bolt Pattern5x120mm Centre Bore72.56mm Load Rating1,550lbs Weight19.55lbs (8.86kg) Face ProfileProfile 1; shallow concavity Wheel ConstructionFlow Formed
A FITMENT FOR YOU
Need help selecting the proper wheel fitment for your BMW? APEX Race Parts have tirelessly test-fitted hundreds of setup combinations in order to provide direct-fit, spacer-free wheel packages for everything from showroom-fresh cars to all-out race builds. Their detailed fitment guides help you avoid costly trial-and-error and walk you through every step of finding your perfect setup.
Fit Matters
Fit Matters The right solution for every application
An optimized car setup begins with the perfect wheel and tyre fitment. Without model-specific attention to each wheels specifications, maximum performance is compromised. Each size was selected to find the right balance between a clean fit and the most grip possible. The EC-7’s wide range of widths, diameters, offsets and face profiles result in unique fitments ranging from 8.5" to 10.5" wide. Each wheel combines these features to meet the different brake caliper, strut, and fender clearance needs of each BMW model. Most vehicle models have options for wheels that range from direct-fit to aggressive for specialty applications.
Face Profile One design, many levels of beauty
The EC-7 wheel is available in three increasingly-concave face profiles; The shallowest face provides increased caliper clearance on narrow applications, while the deepest concave face reduces weight and creates a stunningly aggressive appearance on low offset and wide-width applications.
Spokes More than just a pretty face
The curved spokes of the EC-7 serve many purposes, both in terms of form and function. The split "Y" spokes were carefully evaluated from every aspect to ensure light weight and remarkable strength. Their curved design increases brake calipers in almost every application, allowing the EC-7 to fit where the ARC-8 design simply cannot. The unique curvature of each face profile reduces centre pad material as they are optimally selected for each unique width and offset. The lack of a deep front lip and spokes that connect directly to the barrel's lip, producing a rigid wheel with even load distribution.
Brake Clearance A lot of room in a tight space
Spoke clearance is only half the problem. The barrel construction on a wheel also needs to be big enough to clear the sides of your caliper and rotor. Many aftermarket wheels that have aesthetic compromises in their design may work with smaller stock brakes, or smaller diameter big brake kits, but the larger kits will pose a major problem. The barrel of the EC-7 wheel offers unmatched caliper clearance because wheels shouldn’t limit your choice of aftermarket brake kits, and brake kits shouldn’t force you to run oversized wheels. APEX 2D modelled most Big Brake Kits available in Solidworks and tweaked the wheel design of the EC-7 prior to production in order to fit as many kits as possible.
Hub Centre Easy to access lugs
Race wheels can't just be light, they need to function in a high performance environment. Unlike the narrow lug recesses of most other wheels, the EC-7 wheel features a wide open hub centre that easily accommodates oversized race lugs and beefy impact sockets. This allows for quick and easy wheel changes and prevents chips and scratches from tools.
Hub Centric No rings or adapters here
All APEX EC-7 wheels are purpose built for select vehicle applications, and hub locating rings are never required for any BMW application. All 5x120mm bolt pattern wheels feature a direct-fit, 72.56mm centre bore.
Centre Cap A factory fit and finish
APEX don't reuse one cap design for all of their wheels. Every EC-7 wheel is designed to work with factory centre caps. You can easily replace APEX centre caps with OEM roundels for a clean factory look. The EC-7 wheels will ship with the APEX Gloss Black centre cap that mimics the size and shape of a BMW factory centre cap.
Wheel Hardware Original or Aftermarket, it all works
The EC-7 wheel can be used with all OEM and aftermarket mounting hardware with a 60° tapered seat. Lug bolts, wheel locks, and stud conversion kits all work perfectly. The EC-7 wheel also accepts wheel spacers without issue. The shallow rear chamfer allows the wheel to remain hub centric even when 5mm flat spacers are used. The chamfer is deep enough to clear the chamfered lip found on some aftermarket spacers that would typically cause improper seating of the wheel and, therefore, wheel vibration.
TPMS Sensors They all fit
TPMS sensors, which monitor tyre pressure, are one piece of technology that can't be compromised. The attention to OEM compatibility on the EC-7 wheel doesn't end with centre caps. All APEX wheels accept OEM and aftermarket equivalent TPMS sensors, and any standard sized metal or rubber valve stem.
THE APEX STANDARD
Flow Forming Benefits of forging, without the pain
These APEX wheels are produced using a manufacturing process known as flow forming. This process significantly reduces weight in the barrel, which has the greatest impact on rotational mass. During the manufacturing process, rollers apply high pressure to the inner barrel, compressing the aluminium into its final shape. This effectively eliminates porosity and aligns the grain structure of the metal, which increases tensile strength. The end result is a lightweight and extremely strong barrel that equals that of a traditional forged wheel at a fraction of the cost.
Testing & Certifications Verifiable 3rd party testing
Many companies promote their wheels as being certified by the VIA when they actually aren’t. That’s like using the USDA logo on food without permission. APEX wheels get officially tested and registered by the VIA in Japan, and they have the proof to back it up.
Japan’s JWL is a commonly followed standard for wheel load ratings. The APEX flow formed wheels meet, and most exceed, their load rating requirements. Most manufacturers only meet the minimum while some don’t even do that. Check and verify load ratings before you buy.
Weight & Strength Optimization It’s all in the details
Various design features were implemented to ensure that the EC-7 wheel design was light, but had even more strength to handle the abuses experienced in endurance racing. APEX began with a beefy, multi-spoke, one-piece design. They then added reliefs in the mounting pad to remove weight between lug holes, where they could safely save weight. The design was then run through Finite Element Analysis (FEA) to further optimize the spoke and barrel design. The result is a lightweight wheel with extra strength in all the right places. Use the EC-7 with confidence. It’s over built for both street and track.
Finishes Because being faster is just not enough
The EC-7 wheel is available in multiple finishes. All APEX wheels are finished using a comprehensive multi-stage liquid paint system over a powder coated base coat. Standard finishes include gloss-metallic finishes, and semi-gloss or matte finishes.
Often overlooked, painted or powder coated lug hole seats can cause hardware to loosen or begin the spread of paint chipping to more visible sections. The coating process of the EC-7 leaves lug holes, centre bores and mounting pads untouched, which ensures proper fit and torque values.
Lifetime Warranty A wheel you can depend on
As of recent, all APEX wheels now come with a lifetime structural warranty and 1 year finish warranty, so you can be confident in your purchase. Please contact us for the full terms and conditions.
Models
1 Series / E82 / E88 (2007-2013) / 135i N54
1 Series / E82 / E88 (2007-2013) / 135i N55
1 Series / E82 / E88 (2007-2013) / 125i
1 Series / E82 / E88 (2007-2013) / 120i
1 Series / E87 (2004-2011) / 130i
1 Series / E87 (2004-2011) / 120i
1 Series / E87 (2004-2011) / 118i
1 Series / E87 (2004-2011) / 116i
1 Series / E87 (2004-2011) / 123d
1 Series / E87 (2004-2011) / 120d
1 Series / E87 (2004-2011) / 118d
1 Series / F20 (2012-2019) / M140i
1 Series / F20 (2012-2019) / M135i
1 Series / F20 (2012-2019) / 125i
1 Series / F20 (2012-2019) / 120i
1 Series / F20 (2012-2019) / 118i
1 Series / F20 (2012-2019) / 116i
1 Series / F20 (2012-2019) / 118d
2 Series / F22 / F23 (2014-2021) / M240i
2 Series / F22 / F23 (2014-2021) / M235i
2 Series / F22 / F23 (2014-2021) / 230i
2 Series / F22 / F23 (2014-2021) / 228i
2 Series / F22 / F23 (2014-2021) / 220i
2 Series / F22 / F23 (2014-2021) / 220d
Shipping Notes
Free Standard Shipping on $100+ Orders to the USA.
Except Preorder products are shipped in 48 hours.
Delivery to the USA:
Standard Shipping : 3-10 business days
If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
We offer a 30-day return/exchange service after receiving.
Final sale items are not eligible for returns or exchanges.
To process your return/exchange, please contact us at [email protected]
I recently bought this chew toy for my puppy, and it has been a fantastic addition to his toy collection!
Durability: This toy is impressively durable. My puppy loves to chew, and it has held up really well against his enthusiastic gnawing.
Design: The design is great! It’s the perfect size for my puppy to carry around, and the colors are vibrant and fun. He loves playing with it!
Engagement: It keeps him entertained for hours. The texture seems to satisfy his chewing instincts, and it also helps with teething discomfort.
Safety: I feel good knowing that it’s made from non-toxic materials. I’ve had no issues with pieces breaking off or causing any problems.
Overall, I highly recommend this chew toy for any puppy owner. It’s durable, and engaging, and my puppy absolutely loves it!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 21, 2024
A
Verified Purchase
a customer
Birmingham, US
★★★★★ 5
My dog loves these toys.
Size: Mini, Color: Gator (Pink)
Not a huge toy, nor is my dog. But we have lots of goDog toys. Practically indestructible and my dog likes to carry these in his mouth and bring them onto the foot of our bed. Brilliant colors and good squeaker but my dog is afraid of the squeak. Fair value for cost.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 10, 2026
U
Verified Purchase
University Doc
Los Angeles, US
★★★★★ 5
Our XL dogs love them. Highly recommend it!
Size: Mini, Color: Gator (Pink)
Our XL dogs love this! Highly recommend them! Highly recommend. Not for aggressive chewers but our big dogs don't destroy their toys. They cherish them. Great for play and cuddling. Not to loud either. Very cute.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 13, 2026
V
Verified Purchase
Valhalla49
Lowell, US
★★★★★ 5
When they said strong...
...they weren't kidding. Our pup would chew through everything she could get her sharks teeth into. Like my arms. Nothing lasted as long as a week or maybe two. But she has had Dino for months now. She loves him. He is the go to toy for when she wants to play tug. The material used to make this toy is every bit as strong as the seller claims. I will definitely buy from them again. And I will not wait for this one to rip. I may be waiting a long time. If your pup likes to tear stuff apart, feel safe in buying this toy,
UPDATE: 2/9/2023
Dino finally succumbed to the torture. His back ripped open and despite trying to repair him with ordinary thread he couldn't withstand the pressure, His stuffing was removed and spread all over the living room. Completely emptied he is still a good toy. Strong enough to withstand the forceful play of tug-o-war.
Only thing I would suggest is to use something stronger when closing his back. The rest of him is great. I will be replacing him soon.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 30, 2023
R
Verified Purchase
Rachel
New York, US
★★★★★ 4
Not so tough
Size: Mini, Color: Gator (Pink)
I bought this because I dog sit. The dog chews up every. Single. Toy. So I bought it since it was cheap and it can be in the “chunk” (the dog’s name) toy box. It is not durable at all. He tore it up just as fast as a cheaply made toy.
Chunk LOVES it! He would not stop playing with it. He loves the squeakers, it is a perfect size for him to throw it up in the air and chase it, and he loved ripping the legs off. It is good for my husband and I because there is little to no fluff.
However, it is the perfect size to drop behind the couch and not be able to get. So once he drops it behind the couch, he won’t get it until morning.
Now for my dog’s rating. My dog loves this toy too. He is much more gentle with toys (he has $5 Walmart toys we bought him back in 2020 in perfect condition that he plays with them every day). Before Chunk came over for the weekend, my dog Ted played with this. Ted is a larger small dog and chunk is a smaller small dog. And it is still the perfect size for both dogs.
,
and
Promo Codes Available: