Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 10 - Jul 15
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Yamaha VSTAR 1100 6" Extended Out & Down Saddlebag Kit No Cut Outs LED Rear Fender - 6.5" Speaker LidsYamaha VSTAR 1100 Models Extended 6" Stretched Saddlebags " Out & Down", and Rear LED Fender Fiberglass No? Cut Outs.? 6. 5" Speaker Lids This is a bolt on Kit using your original factory holes as long as our bracket and rail kit for the Yamaha Vstar 1100 is purchased with this kit. the SKU for the necessary mounting kit is YAHVSTAR11004 LED Tail Lights factory recessed into the fender with turn signals, brake & parking lights, this package includes
Yamaha VSTAR 1100 Models Extended 6" Stretched Saddlebags " Out & Down", and Rear LED Fender - Fiberglass - No?Cut Outs.?6.5" Speaker Lids This is a bolt on Kit using your original factory holes as long as our bracket and rail kit for the Yamaha Vstar 1100 is purchased with this kit. the SKU for the necessary mounting kit is YAHVSTAR11004 LED Tail Lights factory recessed into the fender with turn signals, brake & parking lights, this package includes the fender with LED's as pictured. This is a 100% fiberglass unit made here in the USA. This is not a cheap Chinese imitation unit, these are the thick, heavy duty units made by us and that will survive through the worst of the weathers ( now i would not recommend putting it through a tornado or hurricane) and thousands of miles later on your Harley. Get the good stuff here, made by American Harley riders, we love our Harley's and we know you do too, we know the best and only want the best, so should you. These are not the Arlen Ness down-n-out bags and we are in no way affilated with them. Our products are hand made and custom designed by us only, we don't know and can't say the same about the Arlen Ness down and out saddlebags. You will need to sand, prep, minor filler, mockup, primer & paint before installing as these are unfinished. All items pictured are included in this listing. These do not include hardware. Stock Harley hardware will fit. Don't buy those cheap abs/plastic units that crack with vibration and break with the smallest mishap, you won't be able to fix them if you lay your bike down. These units are made out of hand laid fiberglass, they are thick and durable and forgiving in case of an accident or incident. The listings is for 1 set only and does not include the bike! Get your Harley looking like a million bux with this saddlebag/fender kit! . All Items are made in high quality hand laid fiberglass, these are not mass produced cheap and flimsy units, they are thick and better quality than factory.Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.9 ★★★★★
Based on 826 reviews
Sort
Product Reviews
★★★★★ 4
Good DIY Pipe Legs but Powder Coat Quality Lacks
Size: side table leg, Size: side table leg
These industrial style pipe legs make building a DIY end table easy and the kit saves a trip to the hardware store. The fittings go together normally and assembly is simple. Comes individually wrapped. My main issue is the powder coating looks and feels cheap and rubs off easily. The pipes already had marks from touching each other from unboxing. If you do not mind some wear on the finish over time this is a decent purchase. The metal at the hardware store will be thicker and more durable but will cost more. I’d recommend based on ease of having a kit and it being delivered saving me a trip.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 30, 2025
★★★★★ 5
Stable, attractive, and easy to turn into a table with your choice of top
Size: side table leg
The X-shape of the table legs - constructed with solid metal flanges, T-joints, X-joints and 1-inch diameter pipes - provides a strong and sturdy base for a wood top. The legs have adjustable feet pads to prevent scratches and ensure stability. Assembly of the legs is relatively simple (the instructions are clear) but you will need your own tools to attach a top.
The industrial design is especially well suited to rec room or finished basement use. I am adding a 28" diameter raw edge slab of wood from a recently felled tree as the top and it is very attractive. (Photo unavailable because after I made certain it would work I sent the slab out for drying and finishing.)
If you want a custom table and have a particular piece of wood you want to use, these legs are an excellent choice.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 18, 2026
★★★★★ 5
Very nice kit: Beware it is NOT heavy duty plumbing pipe though!
Size: side table leg
I want to give this kit a high rating, but I need to address the "truth in advertising" bit since there may be an important disconnect between what you think you are getting and what actually comes in the box.
Black plumbing used for shelving or table legs is part of an important niche in interior design. I like the industrial loft look myself and have a variety of glass, steel, and masonry elements in my home. This kit fits that look and provides plenty of "strength" for most domestic uses, like shelves or coffee tables. But they are NOT "industrial pipe" or "maximum durability pipe." Note the phrase "cast iron finish feet," which together with the other claims might lead you to think these are cast plumbing fittings. They are NOT!
The feet and flanges feel like electrical conduit fittings, and the pipe sections are likely aluminum. They might be electrical or they might be multi-use, lightweight pipe.
While all this might lead you to think that you're getting a truly retro, heavy-duty pipe kit made of black plumbing pipe, you are not. But, does it matter? Depends. I find the lighter pipe's smooth finish a nice "tone-down" from the rough plumbing look. All together, this kit provides plenty of strength for most furniture and the rustic pipe look, but with a nicer, lighter finish. To me that is a plus--this is a very nice kit and costs less that if you'd pieced it together from real plumbing parts (I priced it out to compare), and looks retro but cleaner. I knew what to expect because while I got this kit free on Vine, I had purchased a nearly identical kit from another seller last year.
So, I'm giving it 5 stars for what it actually is and for the price, JUST BE AWARE THE NARRATIVE IS MISLEADING. Which is unfortunate because just like some people might want the heavier pipe, I'm betting more would be attracted to the look with a cleaner, lighter feel.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 31, 2025
★★★★★ 5
Strong legs, somewhat industrial but trendy also
Size: side table leg
Good legs, some what utilitarian or industrial, they are strong as they are made out of pipe, and assembly is fairly easy once you get the idea of how it goes together. They are roughly 1.5 feet across maybe a bit less adjustable height on each leg, if you have wood floors you may want to put a pad under each leg as they are full metal pipes. Pretty interesting idea and does not cost much.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 31, 2026
★★★★★ 4
Pretty good, take your time and install it well
Size: side table leg
Materials are pretty solid, but once assembled it’s not as sturdy as you would think it should be since the material itself was solid, i say give them a chance, everything out there that’s similar is way over priced
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026