RockJock Johnny Joint 2 1/2in Rod End Weld-On Chromoly Barrel 2.625in X .562in Ball

RockJock Johnny Joint 2 1/2in Rod End Weld-On Chromoly Barrel 2.625in X .562in BallRockJocks weld on chromoly Johnny Joints for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high density urethane bushings that encase the inner ball. The heat treated center balls are cross drilled for thru bolt lubrication and the joint internals are retained with 2 heavy

RockJocks weld-on chromoly Johnny Joints for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable .180 in. wall machined chromoly tubing. This specific joint is a 2 1/2 in. o.d. and features a 2.625 in. mounting width and a .5625 in. thru bolt hole. Grade 8 greasable bolt with nut and washers included.