SKU: 64662814022

ultraflood led schijnwerper 50w met sensor

$65.72 $73.02
Save 10%
No.2 Bestseller on communitymontessori.net >

Pay in installments of $18.25 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 18 - Jul 23

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

ultraflood led schijnwerper 50w met sensorEntdecken Sie die UltraFlood LED Flutlichter: mit leistungsstarken 8000 Lumen Lichtleistung, integrierten Sensoren fr bedarfsgerechte Anpassungen und Wasserdichtigkeitsklasse IP65. Sie sind einfach zu installieren und langlebig und bieten eine ideale Lsung fr helle und sichere Auenbeleuchtung. Sehr hohe Lichtleistung Mit einer Lichtleistung von nicht weniger als 8000 Lumen liefern diese UltraFlood LED Strahler deutlich mehr Licht als die

Entdecken Sie die UltraFlood LED-Flutlichter: mit leistungsstarken 8000 Lumen Lichtleistung, integrierten Sensoren für bedarfsgerechte Anpassungen und Wasserdichtigkeitsklasse IP65. Sie sind einfach zu installieren und langlebig und bieten eine ideale Lösung für helle und sichere Außenbeleuchtung.



Sehr hohe Lichtleistung

Mit einer Lichtleistung von nicht weniger als 8000 Lumen liefern diese UltraFlood-LED-Strahler deutlich mehr Licht als die durchschnittliche Außenlampe. Diese große Lichtmenge schreckt ungebetene Gäste ab und sorgt so im Handumdrehen für mehr Sicherheit rund um Ihr Zuhause oder Ihren Betrieb.


Mit Bewegungs- und Tageslichtsensor

Dank des eingebauten Bewegungssensors können Sie wählen, ob die Lampe dauerhaft brennen soll oder sich nur bei erkannter Bewegung einschaltet. Der Tageslichtsensor verhindert zudem ein unnötiges Einschalten der Lampe und spart Ihnen so Stromkosten.


IP65 wasserdicht

Diese LED-Strahler haben die Schutzart IP65. Das bedeutet, dass sie wasserdicht sind und sogar starkem Strahlwasser standhalten. Sie können sie also bedenkenlos im Außenbereich montieren.


90 Grad neigbar und einfach zu montieren

Die Montage des Strahlers ist dank der mitgelieferten Halterung ein Kinderspiel. Die Leuchte ist zudem neigbar (90°), sodass Sie die optimale Richtung des Lichtstrahls selbst einstellen können.


Sehr lange Lebensdauer

Dank moderner LED-Technologie halten diese 50W UltraFlood LED-Flutlichter mindestens 40.000 Stunden. Und sind wir mal ehrlich: 8000 Lumen Lichtleistung bei 50W Leistungsaufnahme ist doch nichts, oder? Herkömmliche Halogenstrahler verbrauchen bei vergleichbarer Lichtleistung rund 500 Watt. Zählen Sie Ihre Gewinne!

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 64662814022

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 13 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Jo Bo
Battle Creek, US
★★★★★ 5
Saves So Much Time, Perfect Fit On Mercruiser Pre-Alpha Outdrive.
This is a very useful kit. Perfect fit to exchange and align the gimbal bearing on a Mercruiser MR/Pre-Alpha Outdrive. The metal rods are strong and well machined to fit the gimbal bearing and the template lines up great with the housing studs. The overall production quality is very good. Great value because the tools are very durable but for me the biggest value is the time saved. I had the bearing out in about 10 minutes. The ability to line up the bearing before attempting to attach the outdrive upper gear unit is very convenient and saves so much time. This are simple tools, very easy to use.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2026
R
Rick
Louisville, US
★★★★★ 5
Easy to use
Works great
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 9, 2026
S
Verified Purchase
Steve M.
Fort Morgan, US
★★★★★ 5
Works well. You need to drill a 3/8” hole
Appears to be well made, alignment bar slides in nicely. As stated, you need to drill a hole in the bar for the gimble bearing driver, the directions are not clear, what I did was before I take out the old gimble bearing, put an O ring on the bar close to the last step on the bar, slide the bar all the way in, then carefully slide the bar out, this marks the distance from the back of the gimble bearing to where the shaft on the outdrive bottoms out, move the O ring a 1/4” towards the stepped part of the alignment tool (this is so you won’t bottom out the alignment tool when driving the gimble bearing in) then slide the driver puck up to the O ring and use a 3/8” diameter transfer punch through the side hole in the puck to mark the bar. You need to drill a 3/8” diameter hole in the alignment bar, two V blocks, some clamps, and a drill press will make drilling much easier, after the bar is securely mounted and centered in the drill press, use a center drill, then 1/4” drill first, using plenty of oil, drill all the way through, then use the 3/8” drill, deburr both sides and you should be good to go. People complain that it doesn’t come pre-drilled, the reason is that not all out drives are the same so you have to fit it to the outdrive that you have. Fortunately, I have a machine shop at my house and have a jig setup with various drill bushings, but the method I described above should work for you. Just make sure you’re perfectly centered and secure before you start drilling.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
N
Verified Purchase
Nancy filippi
New York, US
★★★★★ 5
A must pull your gimbal bearing
You do need to drill a hole but worked perfect
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 26, 2025
R
Verified Purchase
rich911s
Bozeman, US
★★★★★ 5
Worked for Volvo Penta SX Gimbal Bearing
Very heavy tool, I was surprised. Pulled my bearing like it was nothing. Putting the new bearing in was a little more difficult as you have to drill a hole in the engine alignment shaft where it will work for your particular outdrive. Not hard, but it does not come pre-drilled as the required depth for each particular gimbal bearing differs by manufacturer and model. Measure your bearing placement before removal and check that it was installed correctly in the first place. The bearing should line up with the grease fitting and the o-rings on the drive shaft should end up riding in the middle of the bearing. once you have your measurement drill the hole, I used a drill press. I suppose you could use it on multiple outdrive models as long as you can drill more holes.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2023

recommand products

Helicon-ao Men T-shirt
27.99
Samani t-shirt
59.99
Fresk Rugzak Zwemtas Woods Spruce Yellow
21.95
Tool trolley 4XL zwart/rood
2425.45
Kid's Concept Stapeltoren Edvin
16.45