SKU: 27246704868

Seletron XPF OPF-GPF Emulator - Audi RS6 C8 RS7 C8 4.0 TFSI Twin-Turbo V8 - Geen foutcodes of CEL na OPF Delete

$494.55 $549.50
Save 10%
No.2 Bestseller on communitymontessori.net >

Pay in installments of $137.38 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 20 - Jul 25

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Seletron XPF OPF-GPF Emulator - Audi RS6 C8 RS7 C8 4.0 TFSI Twin-Turbo V8 - Geen foutcodes of CEL na OPF DeleteDe Seletron XPF OPF GPF Emulator is d oplossing voor wie het maximale geluid en prestaties uit zijn Audi RS6 C8 of RS7 C8 wil halen. Met deze emulator kun je de OPF GPF partikelfilters verwijderen zonder foutcodes, storingslampjes of noodloop. Dankzij het plug&play ontwerp is de installatie eenvoudig, snel en volledig omkeerbaar. De emulator bootst elektronisch de aanwezigheid van de OPF GPF na, waardoor de ECU geen afwijkingen detecteert. Ideaal in

De Seletron XPF OPF-GPF Emulator is dé oplossing voor wie het maximale geluid en prestaties uit zijn Audi RS6 C8 of RS7 C8 wil halen. Met deze emulator kun je de OPF/GPF-partikelfilters verwijderen zonder foutcodes, storingslampjes of noodloop. Dankzij het plug&play ontwerp is de installatie eenvoudig, snel en volledig omkeerbaar.

De emulator bootst elektronisch de aanwezigheid van de OPF/GPF na, waardoor de ECU geen afwijkingen detecteert. Ideaal in combinatie met een OPF-delete midpipe of performance uitlaatsysteem, zodat het volle en rauwe V8-geluid weer hoorbaar wordt.

Voordelen

• Geen foutcodes of Check Engine Light (CEL) na verwijderen van de OPF/GPF
• Plug&play montage zonder kabels knippen of software-aanpassingen
• Volledig omkeerbaar naar originele setup
• Betere uitlaatflow en dieper, agressiever V8-geluid
• Verbeterde gasrespons en toerentalopbouw
• Geschikt voor gebruik met OPF-delete buizen of sportuitlaten

Technische specificaties

• Compatibel met Audi RS6 C8 en RS7 C8 (4.0 TFSI Twin-Turbo V8)
• Geavanceerd druksensorsysteem dat de OPF/GPF elektronisch nabootst
• Installatietijd: circa 30–60 minuten (afhankelijk van uitvoering)
• Geen ECU-herprogrammering vereist
• Alleen voor racing use (niet toegestaan op de openbare weg)

Compatibiliteit

• Audi RS6 C8 (2019+)
• Audi RS7 C8 (2019+)

Inhoud

• 1x Seletron XPF Emulator (OPF-GPF Delete)
• Specifieke kabelboom met OEM plug&play stekkers
• Installatiehandleiding

Installatievideo

Bekijk de officiële installatievideo van Seletron op YouTube:
Klik hier om de installatievideo te bekijken

Veelgestelde vragen

Moet de ECU worden aangepast?
Nee, de Seletron XPF Emulator werkt volledig zelfstandig en vereist geen ECU-herprogrammering. De aanwezigheid van de OPF/GPF wordt elektronisch nagebootst.

Kan de auto weer terug naar origineel?
Ja, de installatie is volledig omkeerbaar. De emulator kan eenvoudig worden verwijderd en de originele configuratie kan worden hersteld.

Geeft de emulator foutcodes of storingen?
Nee, bij correcte installatie blijven foutcodes en het motorstoringslampje uit. In zeldzame gevallen kan het lampje kort verschijnen en vanzelf verdwijnen.

Is dit legaal voor gebruik op de openbare weg?
Nee, dit product is uitsluitend bedoeld voor racing use of circuitgebruik.

 

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 27246704868

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 16 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
Troy Amhaz
Lake Worth, US
★★★★★ 5
Must for subwoofers. True 2mm spec. High quality.
Model: 36 SqFt(3.4 SqM), Model: 36 SqFt(3.4 SqM)
Let me start of by saying WOW! This made a huge difference in the SQ of my L7S pushing 930w rms. Before I had major rattles in my 2020 Honda Civic SI. Taking the time to do this to my trunk and Lid made me realize just how loud my subwoofer actually is. It literally eliminated the rattles throughout my whole car. I still plan on doing this to my doors and rear deck but once I upgrade the speakers. I still have half of the box just doing the trunk and lid so 1 box of 36sf will be enough for most of the areas that need to get done. You may need a little more overall. This is true 2mm spec. Very sticky and easy to apply. It just take time to finish the work correctly and roll it down. It is not as heavy as I thought it was going to be. The size of the sheets are perfect for what you need to do. The value is on point for the quality. It does not rip very easily but you can cut it to size without any problems. Again, This is a must buy for anyone who is pushing 1000w rms or more.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 29, 2025
C
Verified Purchase
Craigdog
Lexington, US
★★★★★ 5
Quality product you
Model: 18 SqFt(1.7 SqM), Model: 18 SqFt(1.7 SqM)
Summary: Great quality product, priced right. Cuts and installs easy-follow the instructions people!! PRO TIP-you don’t need to cover every square inch. OVERKILL!! Think about it-when a bell rings you could put your fingers on the edge and silence it right? Same rules apply here. A strip or square will isolate the vibration and notice when placed correctly— knock on the surface and see what vibrates or what part makes the loudest drowning and that’s a good clue of where you should put a piece of this…unless you’re trying to use it for temperature insulation no need to go ape on it. If you look at the bottom of a stainless steel sink, it’s got a stripe or a small sticker of insulation that keeps it from rattling. You can do that here. What’s important to note is the instruction specifically say use a roller to roll the ribs out until it’s smooth that way you’ve got maximum adhesion. I see a lot of pictures and videos from people that finished their install and didn’t follow this simple instruction. It makes sure that it’s stuck down before you put all your paneling and carpet back in and it’s a small step with a cheap wooden roller it’s easy. I’ll say the installation with this product is a breeze. You can use sharp scissors or a blade. It does get gummy after a while, and you may need to clean off your blade or your scissors, but it cuts very well and the ribs make it easy to size in space the thickness is fantastic and the backing paper comes off quite easily. I’ve done lots of installations with Graphics emblems you name it and this product is very easy to use and represents good value.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 30, 2026
S
Verified Purchase
Shopper
Pawtucket, US
★★★★★ 5
Good stuff !
Model: 36 SqFt(3.4 SqM), Model: 36 SqFt(3.4 SqM)
This is an excellent product. Easily moldable, cuttable with good scissors or razor knife, very sticky, works great. This pack was enough to do all 4 doors on a crew max truck, and I went wild on the fronts. I used 9 peices on each rear door which was just enough, and the rest on the fronts. I doubled up layers and even used some on the back of the door panels. If you follow the instructions and dont go wild you might even have extra left over. It works just like you would imagine. Without doing the entire cab there will still be road noise but this helped noise, better audio, no buzzing door panels, terrific improvement. It is kind of heavy, so extra weight is added to truck, but that really isnt a bad thing. It is noticable but in a good way. Get it. Use it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 20, 2026
O
Verified Purchase
Odin M Turner
Massapequa, US
★★★★★ 4
Good product
Model: 36 SqFt(3.4 SqM)
Easy to roll out. Works great  Why did you pick this product vs others?: Fair price for the amount of coverage, good quality  Works well: Easy to install, rolls out great. Forms to contours well
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 13, 2025
B
Verified Purchase
BRIAN HEATH
Draper, US
★★★★★ 5
Great product
Model: 36 SqFt(3.4 SqM)
I used this on the doors of a Toyota Tacoma, worked as it described. Reduced the road noise significantly.. Need to buy another box for the floor and roof of the truck..
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 15, 2026

recommand products

triumph 18
169.99
Cassata 012 Lichtgrijs/paars/saffierblauw/lichtgeel/grijsroze/perzik
10.00
Winter Softness 008 Paars
10.00
MUFC TR TOP Y, CREBLU, 176
54.99
Helen Bag
39.99