HappyModel Moblite7 HDZERO (SPI Frsky)
SKU: 98832548241

HappyModel Moblite7 HDZERO (SPI Frsky)

Sale price$123.48 Regular price$137.20
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 5 - Jul 10

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

HappyModel Moblite7 HDZERO (SPI Frsky)Moblite7 HDZERO FrSky: 1S Digital Mayhem Finally, a 1S digital FPV drone that doesn't weigh more than your car keys. Meet the Happymodel Moblite7 HDZERO FrSky, the featherweight champion of the HDZERO whoop world. It packs a crystal clear, low latency video feed into a mind boggling 29. 5 gram package, all while playing nice with your trusty old FrSky transmitter. No firmware flashing nightmares, just pure, unadulterated indoor ripping. Why You Want

Moblite7 HDZERO FrSky: 1S Digital Mayhem

Finally, a 1S digital FPV drone that doesn't weigh more than your car keys. Meet the Happymodel Moblite7 HDZERO FrSky, the featherweight champion of the HDZERO whoop world. It packs a crystal-clear, low-latency video feed into a mind-boggling 29.5-gram package, all while playing nice with your trusty old FrSky transmitter. No firmware flashing nightmares, just pure, unadulterated indoor ripping.

Why You Want It

Because you crave that glass-clear HDZERO feed but don't want to register your whoop with the CAA. At a scant 29.5 grams, the Moblite7 ducks under the 250g limit with room for a battery and a smug sense of superiority. The built-in SPI FrSky receiver means you can bind your D8/D16 radio in seconds without wrestling with ACCESS protocols or buying another module. We're selling you a drone, not a new hobby in firmware management.

Features and Highlights

  • HDZERO Digital Video: Get the ultra-low latency of the HDZero Nano Lite camera and Whoop Lite VTX, with up to 200mW of output power. See the gap before you hit it.
  • Featherlight 29.5g Weight: It's so light, you'll question if we put anything in the box. This translates to insane agility and impressive flight times on a single 1S battery.
  • FrSky SPI D8/D16 Receiver: No external receiver, no soldering, no fuss. Binds directly to your existing FrSky transmitter so you can get airborne faster.
  • Efficient 20000KV Motors: The EX1002 motors provide the perfect blend of power and efficiency for 1S flight, giving you that 'locked-in' feeling without draining your battery in 60 seconds.
  • GNB27 Battery Connector: Say goodbye to the power-sapping PH2.0. The GNB27 connector delivers every last drop of voltage from your battery to the motors.

Specifications

  • Frame Wheelbase: 75mm (The gold standard for indoor chaos)
  • Weight: 29.5 grams (without battery, obviously)
  • Flight Controller: SuperbeeF4 Lite (Firmware Target: CrazybeeF4FR)
  • Motors: EX1002 20000KV Brushless
  • Video System: HDZero Nano Lite Camera + HDZero Whoop Lite VTX
  • Receiver: Onboard SPI FrSky D8/D16 Compatible
  • Battery Plug: GNB27 (The superior 1S connector)

What’s in the Box*

  • 1x Moblite7 HDZERO Drone (FrSky SPI Version)
  • 1x Spare Canopy (For when you test its 'durability')
  • 8x Gemfan 1610-2 Propellers (4cw, 4ccw)
  • 1x Propeller Disassembly Tool
  • 1x Screwdriver

Moblite7 HDZERO FrSky Disclaimer

Happymodel sometimes swaps accessories, but the core drone and its glorious low-latency digital video system are absolutely guaranteed.

Flight controller
SuperbeeF4 Lite ELRS/FRSKY
SPI ELRS version Firmware target: CrazybeeF4SX1280
SPI FRSKY version Firmware target: CrazybeeF4FR
MCU:STM32F411CEU6 (100MHz, 512K FLASH)
Sensor: ICM20689 or ICM42688P or BMI270(SPI connection)
Power supply: 1S Lipo Lihv battery input (DC 2.8V~4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in SPI Frsky/ExpressLRS receiver
Built-in 5V 1A BEC
Built-in voltage detection
Onboard 4in1 ESC MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HV (2.8v~4.35v)
Currents: 5A continuous peak 6A (5 seconds)
Support BLHeliSuite programmable
Factory firmware: O_H_5_REV16_8.HEX
Default protocol: DSHOT150/DSHOT300/DSHOT600
Onboard SPI ExpressLRS 2.4GHz Receiver Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
RF Frequency: 2.4GHz
Telemetry output Power: <12dBm
Receiver protocol:  SPI ExpressLRS
Could bind with ELRS V2.0 firmware TX module
Onboard Frsky SPI D8 /D16 2.4GHz Receiver SPI BUS receiver Frsky D8/D16 compatible
Compatible Non EU transmitter D8 model and EU-LBT(Frsky_x_lbt)
Channels: 8ch or 16ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m
Based on CC2500 RF module Compatible with Futaba S-FHSS , Redpine protocol
Motor Model: EX1002 20000KV
Configu-ration:9N12P
Stator Diameter:10mm
Stator Length:2mm
Shaft Diameter:Φ1.5mm
Motor Dimension(Dia.*Len):Φ13.5mm*12.5mm
Weight(g):2.5g
No.of Cells(Lipo):1S only
Propeller Gemfan 1610-2 Bi-blades Weight:0.24g
Material: PC
Pitch:1 inchProps Dia:40mm
Center Hole Dia:1.5mm
HDZero Nano Lite Camera 14x16x11 mm
1.5gram
0.5 inch, up to 10650 mV/Lux-sec ultra-high sensitive CMos sensor
Excellent low light performance
Fov:
4:3: D:130° H:108° v:84°
16:9:D:122° H:108° V:65°
HDZero Whoop Lite VTX 1S Input
25mW/200mW RF Output-SmartAudio Support
25.5×25.5 M2 Soft Mounting- Antenna Retention
Removable Shielding Box- 32.5×32.5mm(29x29mm inner)
4.5grams/4mm Thickness (without shielding)

Still Here?

Deep in the spec sheet, are we? You're our kind of people. You probably clocked the ICM series gyro and have strong opinions on GNB27 vs BT2.0. Look, this is probably the best indoor digital FPV drone for pilots who value latency over cinematic fluff. It’s a tool for precision, not for posting landscape videos on Instagram. Add it to your cart and go buzz the cat in glorious HD.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 98832548241

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.3 ★★★★★
Based on 383 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
A
Verified Purchase
Amazon Customer
Pawtucket, US
★★★★★ 5
Fits perfectly in the Epson ET-2720 and reset software worked!
The waste ink pad replacement fit perfectly in the Epson ET-2720 and looked to be identical to the original that needed replacing. The reset software they provide also worked without any issue.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 3, 2026
J
Verified Purchase
joseph g pope
West Palm Beach, US
★★★★★ 1
Not everything included
It says it comes with program to reset the printer an all the information that came with the tanks takes you to sites that want you to buy the key to unlock. These were purchased with the idea everything you needed came with it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 9, 2025
J
Verified Purchase
jody52770
Dallas, US
★★★★★ 5
Good must have product.
Good product, easy to install. A must have for Epson tank printer's. If you do the deep clean and over fill the head cleaning reservoir. Your your printer I'm set off a code that it is full and becomes trash cannot be reset.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 19, 2026
E
Verified Purchase
Erica R. Stinson
Lowell, US
★★★★★ 5
Perfect to fix your Epson Ink Pad Counter Issue
Exactly what I needed! My Epson ET-4700 started displaying an 'E-11' error on the display so I learned I would have to replace the ink pad. The package came with 4 ink-pad receptacles, four baggies for discarding the old ones, plastic gloves and even a miniature screwdriver to get the backing off of the printer. The hardware part was super simple to remove the old and install the new. Hit a bit of a snag with the included software(which was a link to a website)which Windows Defender kept blocking no matter what I tried, but a quick email to support they answered right away. Sent me to a link for better software and I was able to successfully get my printer working again. A+++ transaction and service. Thanks again!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 20, 2025
K
Verified Purchase
2 Kids and a St. Bernard
Natrona Heights, US
★★★★★ 5
Will buy again
Worked extremely well
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026

recommand products