Pay in installments of $15.08 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 19 - Jul 24
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
SkyStars F7 HD Pro + KO45A Flight StackFeatures 1. Solder pads are the largest in size compared to other FC in market. 2. Proper solder pad spacing to avoid solder bridge and facilitate easy soldering. 3. ESC connector on top side rather than bottom which makes it easy for repair. 4. Support ELRS receiver row pin straight mounting. 5. TVS Diode for Reverse Polarity Protection and Voltage Spike Suppression. 6. Powerful BEC to supply all your electronics. 7. Pads arrangement are executed in
Features
1. Solder pads are the largest in size compared to other FC in market.
2. Proper solder pad spacing to avoid solder bridge and facilitate easy soldering.
3. ESC connector on top-side rather than bottom which makes it easy for repair.
4. Support ELRS receiver row pin straight mounting.
5. TVS Diode for Reverse Polarity Protection and Voltage Spike Suppression.
6. Powerful BEC to supply all your electronics.
7. Pads arrangement are executed in such a way that when you twist the wires of the camera VTX and RX you don't get any wire overlapping this gives you a uniform twist and clean look.
8. DJI connector on the top side.
9. Budget-friendly price ( We understand the situation of chip shortage and rising prices of FC )
10. Two stages of Quality check to reduce any faulty electronic.
11. No power lines near Gyro to avoid any EMI interference.
12. Comes ready with I2C support and INAV.
Specifications
Flight Controller
-
MCU: STM32F722RGT6 216MHz
-
Gyroscope: BMI270
-
Baro:Bmp280
-
OSD: Betaflight SPI OSD DJI HD OSD(UART6)
-
Black box: 16MB
-
6x Uarts: UART 1/2/3/4/5/6
-
4x PWM outputs
-
1x I2C
-
3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
-
USB Type-C(USB2.0)
-
1x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr)
-
1x JST-SH1.0_6pin connector (R1/G/R6/T6/G/10V)
-
VTX 10V/Vbat filtered power ON/OFF switch
-
DJI FPV OSD is supported by any spare UART
-
LED: 4 LED independent pads, support WS2812 programming lamp output.
-
Receiver: Support Sbus, crsf, ibus, SBUS, XBUS, support 3.3v Spektrum satellite receiver, The default receiver input is UART1(You can solder ELRS RX on UART1), F7 has a built-in inverter, which can be installed in any spare UART.
Power
- Input voltage: 3-6S
- BEC: 5V/10V 3A max dual-channel BEC supports stable power supply on the sky side of DJI
- LDO 3.3V: Max.250mA
FC Firmware
- BetaFlight firmware: SKYSTARSF722Pro
- INAV firmware: SKYSTARSF722HD
Mounting
- Installation size: 30.5mm × 30.5mm The installation hole is M4 and supports shock column installation
- External size 39mm × 39mm
- Flight control weight: 6.9g
- Flight control onboard voltage sensor.
BL32-45A4IN1 3-6S ESC BLheli32 128K DShot1200 4-in-1 ESC
- Support 128K Dshot1200, Dshot600, Dshot300, Dshot150, Oneshot125, Multishot, PWM control signal
- Power supply voltage: 3-6S (12-26V)
- Continuous working current: 45A 60A
- No built-in 5V BEC output
- Firmware: BLHELI 32 ESC
- Screw hole spacing: 30.5*30.5MM
- Aperture: 4MM
- Weight: 14.6g
- The ESC has an on-board filter capacitor that suppresses the back electromotive force, stabilizes the battery voltage, and protects the flight control ESC precision components.
- EMI Shell provides stronger anti-interference capability.
Note: There is no difference in appearance between the 45A and 60A ESCs, which can be distinguished from the MOS tube.
Includes
-
1x F7HD Pro3 FC
-
1x KO45 or KO60 128K BL32 4IN1 ESC
-
8x Silicon grommets M4 to M3
-
2x JST-SH1.0_8pin cable, 4cm
-
1x JST-GH-6P cable for DJI port, 10cm
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 18 reviews
Sort
Product Reviews
★★★★★ 5
Best chew toy ever!
Size: Small, Color: Textured Ring, Size: Small, Color: Textured Ring
This bone is indestructible. Finally a toy that doesn't get chewed up to pieces.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 5, 2026
★★★★★ 5
Heavy duty, excellent quality
Size: Small, Color: Textured Ring, Size: Small, Color: Textured Ring
I trust the Nylabone brand and would not buy a cheap substitute to save a few bucks. This ring is heavy duty. I got it for our 9-week-old puppy and it keeps her interested and entertained with all the little nubs. She uses it more as a toy than something to chew on, tossing it around and mouthing it. It's very hard so I'm not worried about her being able to chew off any little pieces at this point. This satisfies her for now and helps to keep her busy and reigns in some of her puppy energy. Recommend!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 9, 2026
★★★★★ 5
Strong
Size: Small, Color: Textured Ring
My French Bulldogs have really strong jaws and are aggressive chewers. These really are sturdy and last a good amount of time. I replace every couple of months and they are one of my dogs favorites and easy for them to hold onto.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 25, 2026
★★★★★ 4
Durable Chew Toy That Actually Holds Up to Strong Jaws
Size: Large, Color: Bundle
This is a reliable option for a heavy chewer, especially for a large breed with a strong bite. The material feels tough and well-made, and it stands up well to consistent chewing without immediately breaking down like softer toys tend to do. It also gives a bit of dental benefit by helping reduce plaque and tartar buildup during play, which is a nice bonus since brushing isn’t always realistic. The textured surface keeps it interesting enough to hold attention for a while, and it doesn’t splinter or create a mess. Overall, it’s a solid, durable chew toy that works well for strong chewers who tend to destroy most standard toys quickly.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 6, 2026
★★★★★ 5
Ergonomic good, material so, so
Size: Large, Color: Wishbone
Nice ergonomic, but the plastic come off and dog chew it. I had rather have a stronger material adequate for bigger dogs.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 30, 2026