Pay in installments of $33.75 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 19 - Jul 24
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Rack End for Chrysler Voyager IV RG RS (2000-2008) - CR1410Vehicle Fitment & Part Details This rack end fits the Chrysler Voyager IV (chassis RG and RS), with OE cross reference 4743935AD and a 310 mm overall length. The rack end threads into the steering rack and carries the ball joint that connects to the outer tie rod end. Confirm compatibility by matching the listed fitment details and any OEM reference numbers supplied. Verify VIN engine. Key Details SKU CR1410 Component Rack End Primary Fitment Chrysler
Vehicle Fitment & Part Details
This rack end fits the Chrysler Voyager IV (chassis RG and RS), with OE cross-reference 4743935AD and a 310 mm overall length. The rack end threads into the steering rack and carries the ball joint that connects to the outer tie rod end. Confirm compatibility by matching the listed fitment details and any OEM reference numbers supplied. Verify VIN/engine.
Key Details
- SKU
- CR1410
- Component
- Rack End
- Primary Fitment
- Chrysler Voyager IV RG / RS (2000-2008)
- Specs
- 310 mm length, M14x1.5 thread at both ends, fits at tie rod
Key Benefits
- Cross-referenced to six Chrysler OE numbers (4743935AD, 68019643AB, 68019642AA and more) for accurate matching before ordering.
- 310 mm overall length with matched M14x1.5 threads at both ends, matching the supplied specification for the Voyager IV steering rack.
- Covers all supplied Voyager IV petrol and diesel engine variants including 2WD and AWD models.
OEM Reference Numbers
- Chrysler: 4743935AD, 68019642AA, 68019642AB, 68019643AA, 68019643AB, 68072215AA
Product Specifications
| Specification | Value |
|---|---|
| Length | 310 mm |
| Thread Size 1 | M14x1.5 |
| Thread Size 2 | M14x1.5 |
| Fitting Position | At tie rod |
Vehicle Fitment
| Model | Chassis | Years | Variant | Engine | Power |
|---|---|---|---|---|---|
| Voyager IV | RG / RS | 02/2000-12/2008 | 2.4 | EDZ, 2.4 Petrol | 108 kW / 147 PS |
| Voyager IV | RG / RS | 02/2000-12/2008 | 3.3 | EGA; EGM, 3.3 Petrol | 128 kW / 174 PS |
| Voyager IV | RG / RS | 02/2000-12/2008 | 3.3 AWD | EGA, 3.3 Petrol | 128 kW / 174 PS |
| Voyager IV | RG / RS | 02/2000-12/2008 | 3.8 | EGH, 3.8 Petrol | 160 kW / 218 PS |
| Voyager IV | RG / RS | 02/2000-12/2008 | 3.8 AWD | EGH, 3.8 Petrol | 160 kW / 218 PS |
| Voyager IV | RG / RS | 02/2000-12/2008 | 2.5 CRD | ENJ, 2.5 Diesel | 105 kW / 141 PS |
| Voyager IV | RG / RS | 06/2004-12/2008 | 2.8 CRD | ENR, 2.8 Diesel | 110 kW / 150 PS |
Fitment Notes
- Always match OEM reference number(s) and vehicle details before ordering. Verify VIN/engine.
- Engine specification does not affect rack end fitment - the same part fits all supplied Voyager IV petrol and diesel variants including 2WD and AWD models.
- The rack end is the inner steering link that threads into the steering rack. It is different from the outer tie rod end which threads onto this component and connects to the steering knuckle.
Installation / Use / Maintenance Tips
- Compare the new rack end to the removed unit before installation to confirm length, thread size, and ball-joint orientation match.
- Inspect the steering rack boot, outer tie rod end, ball joint boot, and mounting hardware before fitting the new rack end.
- Clean the threads in the steering rack and use the correct orientation and thread-locking compound where specified by the workshop procedure.
- Replace the steering rack boot and any damaged clips during installation.
- After installation, confirm wheel alignment is checked and adjusted before road use - steering geometry is affected by rack end replacement.
Common Questions
Will this rack end fit my Chrysler Voyager IV?
This part (CR1410) is listed for the fitments shown on this page. Confirm by matching the fitment details. Verify VIN/engine.
What OEM part numbers does this cross-reference?
Cross-reference numbers are listed in the OEM Reference Numbers section above. Match at least one to your original part before ordering.
Is this the same as a tie rod end?
No. The rack end is the inner component that threads into the steering rack and carries the ball joint. The tie rod end (also called the outer tie rod) threads onto the rack end and connects to the steering knuckle at the wheel. Both parts can wear and are often replaced together, but they are not interchangeable.
Do I need wheel alignment after installation?
Yes. Replacing a rack end changes the effective length of the steering linkage. A four-wheel alignment is required after installation before the vehicle is returned to road use.
How do I confirm fitment if there are multiple variants?
Compare the supplied fitment details to your vehicle. Verify VIN/engine. If unsure, request fitment assistance before ordering.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 19 reviews
Sort
Product Reviews
★★★★★ 5
Makes Fantastic Cold Brew. Thoughtful Design. Slightly Frail, But Approaches Perfection.
Style: 51oz｜Conical Styles
When I looked for a dedicated cold brew pitcher, I had a few conditions. Mainly I wanted to avoid plastic at all costs. I needed a pitcher that would be easy to clean and simple to use, without pointless bells and whistles. Finally, I wanted a pitcher that could fit in my fridge without issue.
This pitcher achieves all that and then some. Borosilicate is the same stuff Pyrex used to make its glassware from, a material renowned for its durability especially when exposed to quick temperature shifts. I knew it was overkill, but such material would surely fit the bill. And glass wouldn't affect the flavor of whatever coffee I'd brew in it.
The grind holder is made from stainless steel, with a fine mesh that largely prevents sediment from getting into the coffee. It does allow smaller particles to get through, but they settle to the bottom. Overall I can't complain.
The grind holder is suspended by a rubber ring which also locks the pitcher's lid in place. This forms a nice little seal that seems to help prevent leaking. Obviously there is no vacuum capability here, but it feels sturdy and like it won't let anything in or out once the grind holder is in.
Pouring is easy and accurate. I remove the lid and grind holder, then pour. There's never any spillover nor dripping. The pitcher has a good, well-crafted pouring tip.
Brewing with the pitcher takes a bit of practice. First I dump old grinds if necessary, then fill the grind holder roughly 3/4 of the way with cold brew grinds. BEFORE I place the grind holder into the pitcher, I fill the pitcher with water about 2 inches below the max line. After that, I place the grind filter into the pitcher then slowly press down on the grinds to flatten and wet them. Finally, I slowly pour water in to hit the max line, flattening the grounds as I do.
While the pitcher has notches to determine how much liquid it holds, I don't find that feature helpful because I only use the pitcher with a grind holder which boosts the liquid. I imagine the notch lines may be more helpful for someone using this as a standard pitcher without the grind holder in place.
I've accidentally overfilled this pitcher many times before deciding the best way, in my opinion, to handle it as described above. I've tried placing the grind holder in and then pouring all of the water over the grinds. But because grinds have a tendency to rise and overflow, that method proved messy and ineffective. This is why I add most of the water first, then only add a very small amount of water AFTER putting the grind holder into position just to top it off.
So how good is the cold brew? After trying a few different approaches, I now brew mine in the fridge for convenience, letting it steep for about a week to make a nice dark roast concentrate with Bizzy Organic Dark & Bold grounds. The result is stellar, easily better than any coffee place cold brew I've had in the past couple of years.
Filled to the max line, a full pitcher lasts me about 2 weeks when I have about an inch of coffee per day. I've found cold brew concentrate to be an extremely economical way to stretch costly grinds while creating the richest flavor and this pitcher is a key part of that. With this approach, I'm a happy customer.
One thing I like to do while brewing a new batch of coffee is pouring about 1/3 of the brewed coffee into a tall cup and finishing that while brewing. This method has worked perfectly for me, as I have a new pot of coffee by the time I'm done with the old one.
One thing to point out is that the pitcher is fairly big and the glass is relatively thin. And so I have always hand washed all parts of this pitcher, which has proven straightforward enough. While borasilicate and stainless steel should be dishwasher safe, this has become too important a piece of equipment for me to start playing around with. So I'm not the person to say how well it holds up in a dishwasher. My outlook is to treat this pitcher with the care it deserves and to be rewarded with its offerings for as long as possible.
Overall the pitcher is an all-star at making the coffee I enjoy, being so simple to use that it becomes easy to take for granted. It is almost a trouble-free piece of kitchen hardware and has already paid for itself through sheer convenience. The quality definitely feels top notch, although the thinness of the glass means it needs to be treated with the care and respect it deserves.
I would feel very comfortable recommending this product to almost anyone serious about making a quality cold brew at home.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 29, 2020
★★★★★ 4
Better than expected (Updated)!
This is a simple and effective solution to making a good cold brew. Too bad the process takes forever (no fault to the product).
BUT if you want a stronger taste, after using purified cold water (try to get beans wet), let it sit out for 12 hours or longer but then place in the fridge and you'll notice it darker and richer.
It is impossible if you think some ground beans won't end up in your coffee, they will BUT when you pour, as long as you leave the metal ring in, a little bit of coffee (water) and the beans usually get stuck and don't come out. If you're really nuts about it, you can use a cheese cloth but a bit of grounds won't hurt you and not sure you'd really taste it as it's so fine, barely noticeable.
Those who keep braking the glass? You must use cold water if you immediately start cleaning the pot. Do NOT run under hot water while the pot is cold, you or course will shatter the glass at some point.
Update (07/29/2020)
I am still using this product and no issues with it. But it does leave the coffee grounds smell to it no matter what beans I use, so wash with soap after every use.
Be sure to know, water will evaporate and also get soaked up in the coffee beans, so adding a little more water above Max may be helpful. Also, pro tip, when you take out the insert with the beans, put it over the lid and tilt it and let it rest for 3 Mins so all the water from the beans pours out, do NOT force it with your fingers as you'll get more grounds and will have a harsh flavor.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 12, 2020
★★★★★ 5
Great for iced tea and easy to use
Style: 51oz｜Conical Styles
I use this for making iced tea and it works perfectly. You can use tea bags or loose-leaf tea, and both come out great. It’s easy to fill, strain, and clean, and I like that I can just keep it in the fridge and pour as I go. The airtight seal keeps everything fresh. Super convenient and a staple for my fridge now
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 3, 2025
★★★★★ 5
Great for tea!
Style: 51oz｜Straight Styles
Love this pitcher! Use it for my NORA pregnancy tea to steep overnight in the fridge.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 2, 2026
★★★★★ 5
Beautiful, convenient and plastic free..but on the small size
Style: 51oz｜Conical Styles
I wanted a replacement for my Mr Coffee ice tea maker, which I loved, but I didn’t love the plastic, BPA free or not.
Actually, I much prefer making tea in this tea maker. You need to plan ahead, to let it steep, but there is no need to deal with all the ice and dripping onto the counter like when using the Mr Coffee.
I wanted to get the larger pot, but the larger sized variant is very tall and thin and would not fit in my refrigerator, even though I do have a good sized fridge.
I do wish this one was a bit bigger, but for every day use this is just fine. I think it is simple and beautiful. Totally glad I purchased it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 19, 2026