Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 5 - Jul 10
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
ICON 4.5" Stage 7 Suspension System 2023 Ford F-250 / F-350The ICON Vehicle Dynamics 4. 5 suspension system is a great way to lift your 4WD 2023 2024 Ford F 250 F 350 Super Duty while drastically improving ride quality and performance and allowing fitment of larger, more aggressive wheel and tire combinations. This Stage 7 system is perfect for on road and towing use, as well as job site duty washboard gravel roads, and more aggressive off road use. ICON's 4. 5" Stage 7 System is comprised of 4. 5 lift coil
The ICON Vehicle Dynamics 4.5” suspension system is a great way to lift your 4WD 2023-2024 Ford F-250/F-350 Super Duty while drastically improving ride quality and performance and allowing fitment of larger, more aggressive wheel and tire combinations. This Stage 7 system is perfect for on-road and towing use, as well as job site duty washboard gravel roads, and more aggressive off-road use.ICON's 4.5" Stage 7 System is comprised of 4.5” lift coil springs optimized for trucks equipped with diesel engines with a dual rate design that allows for a softer initial rate for superb on-road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. ICON Vehicle Dynamics Ford Super Duty 4-Link kit further improves performance by eliminating suspension bind commonly experienced with factory radius arms during articulation and allows on-vehicle caster angle adjustment. This “freeing up” of the front end and the ability of the 4-Link Kit to maintain positive caster through the range of travel equates to an unparalleled ride quality in all conditions. The fabricated track bar drop bracket allows the axle to be properly centered under the frame and reduces road feedback throughout the steering system with improved on- and off-road manners thanks to the elimination of bump steer. An adjustable track bar allows for on-vehicle adjustment to fine tune track alignment as well as eliminating the deflective OE track bar bushings for an overall more rigid unit to improve the vehicles handling characteristics.
ICON’s Centerline steering stabilizer kit features a 2.5 Aluminum Series shock absorber with a piggyback reservoir for improved steering damping compared to ICON dual 2.0 steering stabilizers, better controlling undesirable steering feedback caused by larger tires while also improving ground clearance. Heavy-duty fabricated 5" rear blocks and U-bolt kit lift the rear of the vehicle and are designed to withstand heavy towing/hauling duty as well as the stresses of aggressive off-road use. ICON 2.5 Aluminum Series remote reservoir front and rear shocks with CDCV feature a vehicle specific tune for improved vehicle handling and excellent ride quality on- and off-road, with improved performance compared to 2.0 Aluminum Series shocks, and remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The included ICON CDC Valves are externally adjustable valves that restrict oil flow into the reservoir which creates 10 levels of compression damping force ranges. The included box kit includes fabricated front sway bar drop brackets to prevent bind, heavy-duty aluminum bump-stop spacers, and high quality stainless steel extended brake lines.
This suspension system features high quality CNC machined, laser cut, and brake formed components and with the endless hours ICON has spent testing and tuning our suspension components and shock absorbers as a complete system, you can rest assured you have the best suspension solution on the market.
FRONT 4.5" BOX KIT
The ICON Ford F-250/F-350 Super Duty 4WD Front Box Kit is an essential component of ICON 4.5” lift suspension systems. Front sway bar drop brackets fabricated from CNC laser cut steel plate ensure bind free motion of the sway bar links through the entire range of suspension travel and are powder coated for corrosion resistance. Extended length stainless steel brake line kit prevents brake line damage and eliminates the bending of OE hard lines typically required for brake line drop brackets. Bump travel is properly limited with robust CNC machined 6061 aluminum bump stop spacers that are designed for the stresses of aggressive off-road driving.
FEATURES & BENEFITS:
- Drops sway bar to prevent bind in sway bar links
- Extended length stainless steel braded brake lines
- Heavy duty bump stop spacers proper limit suspension travel
- CNC machined, laser cut, and brake formed components
FRONT 4.5" DIESEL DUAL RATE SPRING KIT
The ICON Vehicle Dynamics Ford F-250 and F-350 Super Duty 4.5" coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON Ford Super Duty coil springs provide 4.5" of lift height and feature a dual rate design optimized for use with trucks equipped with diesel engines. The dual rate design allows for a softer initial rate for superb on-road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance.
FEATURES & BENEFITS:
- 4.5" lift height over stock
- Dual rate coil springs improve on and off-road ride quality over stock
- Vehicle specific spring rates optimized for use with trucks equipped with diesel engines
- Dual-stage, semi-gloss powder coat offers excellent corrosion resistance
- 100% bolt-on system makes for an easy install
TRACK BAR BUMP STEER BRACKET KIT
This bracket features a 2-position cam that will optimize the track bar geometry for both 2.5” and 4.5” lifts. This component has been designed to work with both a factory track bar as well as an ICON Vehicle Dynamics adjustable unit, and will allow for the axle to be properly centered under the frame with either. Benefits of this improved geometry and axle alignment include reduced road feedback throughout the steering system and improved on and off-road manners thanks to the elimination of bump steer.
FEATURES & BENEFITS:
- Bolt-on design utilizes factory frame holes for simple installation
- Corrects bump steer geometry
- 2-position cam optimized for 2.5” & 4.5” lifts
- Centers front axle under frame with factory track bar
- Reduces road feedback through steering
- Durable satin black powder coat finish
4-LINK FRAME BRACKET KIT
The 4-link bracket kit is an essential component of the ICON 2023-2024 Ford Super Duty 4-Link Conversion System. This 4-Link system not only gives your Ford Super Duty an aggressive look, it enhances the articulation of the front suspension by eliminating bushing bind and improves handling of the truck by maintaining consistent caster angles through the entirety of the front suspension travel range. The large, deflective radius arm bushings are replaced with competition grade, PTFE lined spherical bearings in each link. This harder surface minimizes deflection to further increase the overall handling characteristics for maximum predictability and suspension responsiveness. Additionally, the ICON double adjusters in the lower links allows tuning of caster angle while the links are installed on the vehicle, easing the front-end alignment process.
The 4-link brackets, upper links, and lower links are sold separately, allowing the 4-link system to be customized for your specific Ford Super Duty year range.
FEATURES & BENEFITS:
The ICON Adjustable Track Bar helps center the axle of your lifted Ford F-250 and F-350 Super Duty and allow for increased suspension travel and articulation. A massive FK Rod End at one end, along with greaseable and replaceable OE style ball joint at the other end yields the best combination of maximum travel and articulation while also removing bushing deflection for improved handling characteristics. ICON’s exclusive rod end Double Adjuster Sleeve allows for fast, easy “on-vehicle” adjustment of track bar length without requiring removal or disassembly of the track bar. This allows for easy correction of axle location and dialing in precise tracking whenever adjustments are made to ride height. The track bar is made of CNC bent 1.625” x .250” wall 1026 DOM tubing with CNC machined threaded end and ball joint housing with a multi-stage black powder coat finish. Hit the trail with the confidence of knowing your suspension components are covered by ICON’s Limited Lifetime Warranty.
- 4-Link system maintains consistent caster angles for superior handling characteristics
- Improves front end articulation and overall drivability
- Allows on-vehicle caster adjustment via ICON double adjusters in lower links
- Brackets are fabricated from CNC laser cut and brake-formed steel plate
- Corrosion resistant semi-gloss black powder coat finish
- 100% Bolt-on system - no cutting or welding necessary for install
- Fabricated components covered under ICON's Limited Lifetime Warranty
FRONT UPPER LINKS
These upper links are an essential component of the ICON 2023-2024 Ford Super Duty 4-Link Conversion System. This 4-Link system not only gives your Ford Super Duty an aggressive look, it enhances the articulation of the front suspension by eliminating bushing bind and improves handling of the truck by maintaining consistent caster angles through the entirety of the front suspension travel range. The large, deflective radius arm bushings are replaced with competition grade, PTFE lined spherical bearings in each link. This harder surface minimizes deflection to further increase the overall handling characteristics for maximum predictability and suspension responsiveness. Additionally, the ICON double adjusters in the lower links allows tuning of caster angle while the links are installed on the vehicle, easing the front-end alignment process.
FEATURES & BENEFITS:
- 4-Link system maintains consistent caster angles through suspension travel for superior handling characteristics
- Improves front end articulation and overall drivability
- Allow on-vehicle caster adjustment via ICON double adjusters in lower links
- Upper links are constructed from CNC machined 2” x .188” wall DOM steel tubing
- PTFE lined FK spherical bearings eliminate deflection
- Corrosion resistant semi-gloss black powder coat finish
- Fabricated components covered under ICON's Limited Lifetime Warranty
FRONT LOWER LINKS
These lower links are an essential component of the ICON 2005-2024 Ford Super Duty 4-Link Conversion System. This 4-Link system not only gives your Ford Super Duty an aggressive look, it enhances the articulation of the front suspension by eliminating bushing bind and improves handling of the truck by maintaining consistent caster angles through the entirety of the front suspension travel range. The large, deflective radius arm bushings are replaced with competition grade, PTFE lined spherical bearings in each link. This harder surface minimizes deflection to further increase the overall handling characteristics for maximum predictability and suspension responsiveness. Additionally, the ICON double adjusters in the lower links allows tuning of caster angle while the links are installed on the vehicle, easing the front-end alignment process.
FEATURES & BENEFITS:
- 4-Link system maintains consistent caster angles through suspension travel for superior handling characteristics
- Improves front end articulation and overall drivability
- Allow on-vehicle caster adjustment via ICON double adjusters in lower links
- Lower links are constructed from CNC machined 2” x .188” wall DOM steel tubing
- PTFE lined FK spherical bearings eliminate deflectionCorrosion resistant semi-gloss black powder coat finish
- Fabricated components covered under ICON's Limited Lifetime Warranty
ADJUSTABLE TRACK BAR KIT
FEATURES & BENEFITS:
- Helps to free up bind during front suspension travel and articulation
- Heavy Duty PTFE-lined FK Rod End for maximum articulation and minimal deflection
- On-vehicle adjustable for precise track alignment using ICON’s double adjuster
- Greaseable and replaceable OE style ball joint
- CNC machined and bent 1.625" X .250" wall 1026 DOM tubing
- Multi-stage black powder coat finish for corrosion resistance
2.5 PIGGYBACK CENTERLINE STABILIZER KIT
The ICON Centerline Steering Stabilizer features a through-shaft design to eliminate the push/pull sensation associated with traditional steering stabilizers, resulting in more consistent damping and symmetrical steering feel throughout the input range. The large 2.5-inch diameter stabilizer body and piggyback reservoir increases fluid volume to prevent performance fade due to heat and cavitation. This unit provides a significant increase in steering damping compared to the stock equipment, for an improved driving experience with both stock size and oversize aftermarket wheels and tires. The kit also allows for increased steering travel compared to other aftermarket steering stabilizers. The stabilizer body shares components with ICON's proven 2.5 Series shock absorbers, meaning the unit is fully rebuildable. 2.5 Series features a 6061 hard anodized aluminum shock body for excellent corrosion resistance and a beefy 7/8” chrome plated induction-hardened steel shaft. FK Rod End bearings provide precise function & feel throughout steering range. Installation is 100% bolt-on using common hand tools and should be an easy job for both professional mechanics and experienced DIY'ers.
FEATURES & BENEFITS:
- Through shaft design eliminates the push/pull sensation associated with traditional stabilizers
- Provides symmetrical steering feel throughout input range
- Drastically increased steering damping over stock unit
- Offers increased wheel travel compared to ICON's dual steering stabilizer kit
- Fully rebuildable ICON Vehicle Dynamics 2.5 Series shock
- Piggyback reservoir design
- 6061 hard anodized aluminum shock body provides excellent corrosion resistance
- 7/8” chrome plated induction-hardened steel shaft
- 5WT shock oil for consistent suspension damping along a wide temperature range
- FK Rod End bearings for precise function & feel throughout steering range
- 100% bolt-on installation
5" BLOCK KIT
The ICON Vehicle Dynamics Ford F-250/F-350 Super Duty 5” Rear Block Kit features a square, non-tapered block design to provide easy rear lift to a Ford Super Duty pickup. These heavy-duty blocks are fabricated from CNC laser cut and brake-formed steel plate and heavy duty .250” wall square tubing to endure the stresses of heavy towing/hauling duty as well as aggressive off-road use. Their reinforced bump stop tang provides proper bump stop engagement and limits compression travel to prevent damage to the rear shocks and shock mounts at full bottom out.
FEATURES & BENEFITS:
- Vehicle specific, square block design with 5” overall height
- Fabricated from CNC laser cut and brake-formed steel plate and heavy-duty .250” wall square tubing
- Heavy-duty bump stop tang provides proper bump stop engagement
- Semi-gloss black powder coat finish for corrosion resistance
REAR 15" U-BOLT KIT
The ICON Vehicle Dynamics Ford F-250/F-350 Super Duty 15” U-bolt kit consists of high-quality grade 8 U-bolts to ensure that the leaf springs stay properly secured to the rear axle. Featuring a black E-coat finish for corrosion resistance and a length of 15” these U-bolts will work with a variety of leaf spring and rear block options. All mounting nuts and washers are also included to make sure installation is quick and easy.
FEATURES & BENEFITS:
- High strength, grade 8 steel hardware
- 15" length
- Black E-coat finish for corrosion resistance
- Kit includes U-Bolts, nuts, and washers
4WD 4.5" FRONT AND REAR 2.5 VS RR / PB
ICON’s 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. With a truly vehicle-specific design, these shocks are configured specifically for each application in both length and damping tune. Featuring one-piece impact extruded aluminum cylinders, these 2.5 Aluminum Series shocks offer lighter weight, improved corrosion resistance, and a more uniform finish than traditional plated steel cylinders. Like all ICON shock absorbers, these 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. ICON’s unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal “Bump Zone” that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom-out conditions and controls the suspension effectively when compressing at high velocity. If you are looking for a more user-defined tune, consider looking into the Compression Damping Control Valve (CDCV) shocks.
FEATURES & BENEFITS:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with remote reservoir
- Remote reservoirs maintain cooler operating temperatures during extended off-road use and allow for longer suspension travel
- One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 7/8” diameter induction hardened, chrome plated shock shaft
- Polyurethane bushings and forged steel mounting stems for OE factory type fitment
- PTFE lined spherical bearings and application specific mounting hardware
- 6061 aircraft grade aluminum CNC machined components
- One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
- Fully rebuildable and retunable
0-3” REAR LIFT V.S. 2.5 ALUMINIUM SERIES SHOCKS, PIGGYBACK RESERVOIR W/ CDCV, PAIR
ICON Vehicle Specific (V.S.) 2.5 Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON'S Shock Absorbers, 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. The ICON CDC Valve is an externally adjustable valve that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges.
FEATURES & BENEFITS:
- ICON's CDC Valve technology allows for 10 levels of high-resolution compression adjustability with the turn of a knob
- ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
- Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with piggyback reservoir
- One piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 7/8” diameter induction hardened, chrome plated shock shaft
- PTFE lined spherical bearings and application specific mounting hardware
- 6061 aircraft grade aluminum CNC machined components
- One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
- 100% Rebuildable
- 100% Revalveable
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.2 ★★★★★
Based on 2487 reviews
Sort
Product Reviews
★★★★★ 5
Good
Size: 3 Fl Oz (Pack of 1)
Good
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 23, 2026
★★★★★ 3
Smell
Size: 3 Fl Oz (Pack of 1)
It’s alright, smell not my favorite
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 16, 2025
★★★★★ 5
Lightweight, Smooth, and Truly Unscented — My New Go-To Sunscreen
Size: 6 Fl Oz (Pack of 1), Style: SPF 50
This is the first time I tried this Banana Boat unscented sunscreen, and I’m genuinely impressed. One of the biggest things I look for in sunscreen is how it feels on the skin, and this one delivers—it’s not sticky at all and goes on very smooth. It’s easy to apply and absorbs quickly without leaving that heavy, greasy feeling.
I also really appreciate that it’s unscented. There’s no strong or unpleasant smell, which makes it much more comfortable to use daily.
I’ve used other brands before, like Neutrogena and some higher-priced options, but honestly, this one stands out. It performs just as well—if not better—at a more reasonable price.
Overall, this is a great sunscreen that I’ll definitely keep using. Highly recommended if you want something lightweight, smooth, and fragrance-free.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 25, 2026
★★★★★ 5
BEST sunscreen on the market
Size: 6 Fl Oz (Pack of 1), Style: SPF 50
This sunscreen is truly the best sunscreen on the market. I have now bought 4 bottles, and plan to purchase more. It is extremely milky, dissolves onto the skin perfectly, it feels like you arent wearing any sunscreen at all. I tell everyone I know about this product.
I also purchase the FACE spf which is even more smooth. I wish they sold this in a giant container, because I apply this everyday !!
This sunscreen has made it more accessible for me to apply sunscreen daily, it also has very minimal scent, and never burns your eyes.
Personally I will never buy another type of sunscreen again after this sunscreen.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 8, 2026
★★★★★ 5
Good for acne prone sensitive skin
Size: 3 Fl Oz (Pack of 1), Style: SPF 50
I am in my 30s with combo leaning oil and acne prone fair skin with pigmentation issues and I’m on prescription tretinoin every day. I sometimes use hydroquinone when my pigmentation issues flare up. I wear sunscreen every single day to protect my skin. It’s especially important since I’m on Tret. daily. Being that I have acne prone skin finding a sunscreen has always been a HUGE challenge for me. I’ve spent so much time on SkinSort and similar sites looking through sunscreen ingredients lists trying to find ones that won’t break me out. I’ve purchased PLENTY of k-beauty, j-beauty, EU sunscreens and Us sunscreens from Sephora and drugstore only for them to break me out. My skin is very sensitive/breakout prone to long ingredients lists, emollients, heavy textures, oils and lots of botanicals. I randomly stumbled upon this banana boat sunscreen here on Amazon and saw the short and fairly simple ingredient list that is low (not free of- but low) in occlusive ingredients in comparison to other sunscreens so I decided to order it. It has not broken me out and it feels nice. No alcohol in it, no irritation, no pimples so far. The tube is user friendly, the texture is light and pleasant and the sunscreen is affordable and accessible. I also appreciate how it’s water resistant so can be worn every day OR pool/beach. I highly recommend this to anyone with acne prone or sensitive skin if you are ok with US chemical sunscreens. I prefer chemical sunscreens over mineral sunscreens as mineral sunscreens break me out. This affordable banana boat in my opinion is WAY better for me personally than high end and expensive options that have tons of pore clogging ingredients. Yes even the popular k-beauty sunscreens break me out unfortunately. Everyone is different and anything has a potential to clog someone but for me this sunscreen is way more safe for my acne prone skin than any other sunscreen option I’ve come across. The majority of sunscreens are just packed with pore cloggers, but this banana boat one is minimal in comparison. The tube is travel size (tsa approved) but bigger than your standard 1.7oz sunscreen. This is nice for me because like I mentioned I wear sunscreen every single day and re-apply if I’ll be outside in the sun. While spending time outside I did not burn while wearing this sunscreen and I’m extremely fair skinned. I also did not notice any new pigmentation issues. The texture is nice, light and pleasant. It wears well under makeup. I normally wash my face in the AM, apply a hydrating kbeauty toner, tiny little dots of super light gel moisturizer (not much- I’m oily!) and then apply this banana boat sunscreen on top. Sometimes I wear makeup sometimes I don’t. It works both ways. I have not experienced any pilling. I have not noticed any scent with this sunscreen other than the sunscreen filters smell which isn’t too bad at all in comparison to other sunscreens I’ve tried. The sunscreen itself adds a touch of moisture but I don’t find it to be greasy on my oily skin. In the summer I will probably use a hydrating toner or serum (skip gel moisturizer) and then apply the banana boat sunscreen since I live in a warm climate. Anyways, this is a very nice textured non offensive not overly clogging (for me at least) Us chemical sunscreen that has been very unproblematic for me. I just apply a decent amount every AM and don’t even think about it. Like I mentioned if I’m out in direct sunlight (normally I’m not in the winter) I’ll reapply as needed. In the PM I use bioderma micellar water and then follow it with my Remedy brand face cleanser and it takes the banana boat off fine. I’m interested in trying the spray version (always spray decent amount into hand and then apply!) for my body in the summer. For now I apply this banana boat sensitive face to my face, neck, hands or whatever exposed area. If you tried the banana boat light as air face spf that one is a little more matte and dry but it’s also more pore clogging in both my experience and by ingredients lists. This banana boat sensitive has a bit of a different texture that’s lightweight and still not greasy but it’s more of a traditional light lotion. The banana boat light as air face one felt great but over time gave me more closed comedones. Needless to say I highly recommend this lightweight Us chemical sunscreen to anyone looking for a simple waterproof Us chemical sunscreen that is affordable and easy. Obviously no white cast as its chemical. Sorry for the long review but it might help someone out. Also I purchased this with my own money I am not a part of one of those product reviewing groups- whatever they are called. No shade to anyone lol.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 6, 2026