Omnipure TQ56-75-XHR-FC200 RO membrane 75 GPD with Flow Restrictor

Omnipure TQ56-75-XHR-FC200 RO membrane 75 GPD with Flow RestrictorUpgrade to the Omnipure TQ56 75 XHR FC200 encapsulated RO membrane engineered for higher efficiency, superior contaminant rejection, and an industry leading 1: 1 pure water to water waste ratio. REPLACES ANY OF THESE RO MEMBRANES: TQ56 15FC (1518 GPD) upgrade to 4 more output TQ56 36FC (36 GPD) upgrade to 2 more output TQ56 50FC TQ56 50FV (50 GPD) get 50% more water TQ56 75FC (75 GPD) direct performance match TQ56 100CV (100 GPD) universal compatible

Upgrade to the Omnipure TQ56-75-XHR-FC200 encapsulated RO membrane — engineered for higher efficiency, superior contaminant rejection, and an industry-leading 1:1 pure water to water waste ratio.

REPLACES ANY OF THESE RO MEMBRANES:
• TQ56-15FC (15–18 GPD) — upgrade to 4× more output
• TQ56-36FC (36 GPD) — upgrade to 2× more output
• TQ56-50FC / TQ56-50FV (50 GPD) — get 50% more water
• TQ56-75FC (75 GPD) — direct performance match
• TQ56-100CV (100 GPD) — universal compatible replacement
• Q5672-50FC, Q5672-SA, Q5572-SA — direct Omnipure Q-Series replacement

ENVIRO FRIENDLY 1:1 WATER WASTE RATIO
The TQ56-75-XHR-FC200 is built around a Thin Film Composite (TFC) membrane — the gold standard in reverse osmosis filtration. TFC's multi-layer polyamide construction delivers maximum contaminant rejection at lower operating pressures, producing faster flow rates and a longer membrane lifespan. That efficiency is what makes the 1:1 pure-to-waste ratio possible: for every gallon of clean water produced, only one gallon is discarded — compared to 3 to 4 gallons wasted by conventional RO systems.

BUILT-IN FC200 FLOW RESTRICTOR INCLUDED
Unlike bare 1812-format membranes that require a separate flow restrictor, the TQ56-75-XHR-FC200 includes a factory-integrated FC200 (200 mL) flow control. Just twist out the old membrane, twist in the new one. No tools. No extra parts. No mess.

EXTRA HIGH REJECTION (XHR) PERFORMANCE
The XHR membrane technology delivers superior contaminant rejection rates, reducing lead, mercury, fluoride, Arsenic V, barium, cadmium, chromium III & VI, copper, nitrate, nitrite, radium, selenium, and total dissolved solids (TDS) from your drinking water.

SYSTEM COMPATIBILITY
Compatible with: PuROTwist 4000 (50 GPD & 75 GPD models), PuROTwist 3000, and any system using Omnipure Q-Series twist-connect filter heads.

NOTE: This is an encapsulated Q-Series membrane (12.75" × 2.5" with Q-twist connector). It is not a standard 1812 bare membrane. If your system uses Omnipure Q-Series or PuROTwist-style twist-connect filters, this is the correct replacement.