Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 7 - Jul 12
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Sawn Reg C24 Structural Timber 47mm x 175mmC24 sawn regularised structural timber in 47mm x 175mm is a heavy section softwood graded to BS EN 338 for use in load bearing applications including floor joists, roof rafters and purlins. Kiln dried to 20% moisture content or below for improved dimensional stability on site. Specifications Property Detail Material Softwood (kiln dried) Grade C24 structural grade (BS EN 338) Finish Sawn regularised, eased edges Nominal Size 47mm x 175mm Lengths
C24 sawn regularised structural timber in 47mm x 175mm is a heavy-section softwood graded to BS EN 338 for use in load-bearing applications including floor joists, roof rafters and purlins. Kiln dried to 20% moisture content or below for improved dimensional stability on site.
Specifications
| Property | Detail |
|---|---|
| Material | Softwood (kiln dried) |
| Grade | C24 structural grade (BS EN 338) |
| Finish | Sawn regularised, eased edges |
| Nominal Size | 47mm x 175mm |
| Lengths Available | 3.6m (12ft), 4.8m (16ft) |
| Moisture Content | Kiln dried to 20% or below |
What it's used for
- Floor joists in new build and renovation projects where longer spans require a deeper section
- Roof rafters and purlins in pitched roof construction
- Load-bearing wall frames and structural lintels
- Structural subframes for decking and commercial timber framing
Fitting and handling
Allow the timber to acclimatise on site for at least 24 to 48 hours before fixing, keeping it stacked flat on bearers in a covered, ventilated area to prevent warping. For joist and rafter applications, fix with joist hangers, structural screws or ring-shank nails rated for the load requirement, following the relevant sections of the Building Regulations Approved Document A. Store off the ground and under cover if not immediately installed, particularly during wet Welsh weather.
FAQ
What is the difference between C16 and C24 structural timber?
C24 has a higher bending strength and stiffness rating than C16 under BS EN 338, making it the correct choice where longer spans, heavier loads or Building Control specifications call for a stronger section. C16 is suitable for lighter-duty framing and stud work.
Is this timber suitable for floor joists?
Yes. The 47mm x 175mm C24 section is widely used for floor joists across standard domestic and commercial spans. Always check your structural engineer's specification or span tables to confirm the correct centres and section size for your project.
What does regularised mean for sawn timber?
Regularised means the timber has been processed after sawing to a consistent depth, typically reducing the 175mm nominal height to approximately 170mm with eased (slightly rounded) edges. This ensures boards sit level when fixed side by side, which is particularly important for floor joist installations.
Browse the full range of C24 graded timber at Nottage Timber Merchants. We supply trade and retail customers across Bridgend and South Wales, with next-day delivery available to local areas. Contact us directly for volume pricing or cut-to-length enquiries.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 1042 reviews
Sort
Product Reviews
★★★★★ 5
Versatile Room Divider With Easy Assembly and Strong Coverage
Size: 3 Panel 12FT W
I picked up this Siebwin 3-panel folding room divider mainly for privacy and room separation, and overall it works very well.
Assembly is very straightforward, and the divider can be set up, taken apart, and stored without much effort. The fabric quality feels good, and the frame construction is stronger and more stable than expected. The support tubes especially feel well built and help keep the divider standing securely.
One feature I really liked is the flexibility of the design. The panels can be used together as a complete divider or separated depending on the setup and available space. That makes it much more versatile for different room layouts or temporary privacy needs.
The coverage is also very good, and the size matches the manufacturer’s description accurately. The fabric blocks light and background visibility well enough to provide solid privacy without feeling overly heavy. The wider feet also help improve stability compared to thinner folding dividers.
Another positive detail is that everything arrived complete with no missing parts or damaged pieces, which made assembly much easier and faster.
Compared to cheaper privacy screens, this one feels more durable and easier to customize depending on the situation. In terms of value for the money, it feels like a very practical and worthwhile purchase considering the size, flexibility, and build quality.
Overall, a versatile and well-built room divider with easy assembly, strong privacy coverage, stable construction, complete included parts, flexible panel configuration, and excellent everyday functionality.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
★★★★★ 5
Stable, flexible in deployment configuration, creates true privacy and looks great.
Size: 3 Panel 12FT W
This is the second room divider panel I have installed, and there are several features about this one that I like much better than my older one.
The fact that there are no gaps and that the material is thicker means you get more privacy or more hiding power, if you wish. My older divider has vertical spaces between each of the panels and the panels are half as wide as the Siebwin panels, so there are many vertical spaces. The Siebwin divider really creates privacy.
Another feature that I really appreciate is that the legs are wider and stand off from the floor. On my older one the legs are flat and they're rather awkward to adjust because they create more drag on the floor. The feet on the older one also loosen if you turn them counter clockwise, so adjustments of configuration that require the feet to be moved are more complex.
The older divider also must be deployed in a zig-zag fashion because he feet are not as wide, but this new one can be deployed and stable in a straight, an "N" shape or an arc. They are both the same length, but because the older one must be use in a zig-zag deployment it doesn't reach to the length of the new one.
The Siebwin divider definitely costs more at $103.48, but it sports several features and advantages over the other brand, so it does a better job and is worth the extra cost.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
★★★★★ 4
Easy to assemble, does the job, material is shiny nylon and shows creases, minor defects, sloppy
Size: 3 Panel 12FT W, Size: 3 Panel 12FT W
The Siebwin room divider is a good idea, and for the price, it mostly delivers on the intended functionality. I ordered the 12 foot, 3-panel version mainly to hide an unfinished basement storage area that had become an eyesore. It works well for that purpose and gives the space a cleaner appearance without spending the kind of money that more decorative dividers or custom partitions cost. If you need something temporary, portable, or mainly functional, this is a viable option.
There are a few limitations that became obvious during setup and use. The first thing I noticed was that the weld quality on some of the metal poles is fairly sloppy. Once the cover is installed, you do not really see it, but up close, it does not look especially refined or professional. The blackout material also is not a matte canvas style fabric as I expected. It has more of a shiny nylon appearance, and the creases are fairly visible. Being that it’s more of a nylon, I’d be hesitant to try steaming it to remove the creases. However, the creases do not matter if you are using it in a basement, dorm, or shared room, but for photography, video work, or a professional office setting, the appearance could be disappointing. The fabric is thick enough, though. It blocks visibility well enough, but strong light behind it still shows through to some extent, nothing deal-breaking. Also, my fabric appeared to be slightly defective. The hook and loop strip on one of the bottom sections was off-center and couldn't be totally attached because it was lined up with one of the legs. I originally hoped to use this as a video backdrop, but I will probably end up replacing the fabric with a proper green screen or canvas material while continuing to use the frame itself. For now, it does a good job of covering my basement junk.
Assembly was actually easier than I expected and took roughly 15 to 20 minutes. The longer vertical poles are tethered together similarly to tent poles, which made setup straightforward and fairly intuitive. The shorter horizontal pieces slide and snap together to the top and bottom of the vertical assembly. After each section is assembled, the divider panels connect together with metal plates and two knurled screws (at the top and bottom), so no tools are really required. A few screws were difficult to start because paint had gotten into the threads, but once they caught, they tightened down normally. The feet install with similar knurled fasteners and help keep the divider reasonably stable. One thing to watch for during setup is the fabric orientation. There is one arrow indicator in the middle of the fabric to indicate up. However, if you need another indicator, the smaller hook and loop strip goes on the bottom while the longer strip goes on top. I realized mine was upside down right before finishing and had to redo it. I wasn't difficult to redo, despite the defect in mine.
The overall design is practical and easy to move around. I do like that the panels can fold and bend into different shapes depending on the space. The widened feet help stability, although when trying to stretch the fabric tight, I noticed the poles sometimes wanted to overlap slightly at the joints. Tightening everything helped somewhat, but it still happened occasionally. The divider feels adequate for normal indoor use, though I would not expect premium durability or luxury-level fit and finish at this price point. The entire device can also be easily disabled and stored in a tote if you need it completely out of the way. It comes with assembly instructions, but even if you didn’t have them, it’s easy to build without them (save a mistake or two).
In terms of value, I think the Siebwin divider mostly matches its price. Around $100 gets you a large freestanding partition with decent usability and easy assembly, but there are compromises in materials, appearance, and refinement. The defects are also off-putting, but hopefully you won't have them. Higher-end room dividers can easily cost two or three times more, so some of the tradeoffs are expected. I also noticed cheaper alternatives online, but based on the quality here, I suspect those would probably have even more issues. For practical home use, temporary privacy, hiding storage areas, or separating shared spaces, this is a good option as long as expectations stay realistic.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
★★★★★ 3
Works well but takes up more space than expected
Size: 2 Panel 8FT W, Size: 2 Panel 8FT W
This room divider does the job for creating a little extra privacy and was easy enough to set up. The panels feel decent quality and the wider feet help keep it more stable than some cheaper screens I’ve tried. My only issue is that it takes up a bit more room than I expected, especially with the feet sticking out. It’s still portable and folds away nicely, but definitely measure your space first. Overall it works well for separating a room or blocking off an area temporarily. i wish it came in other colors
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
★★★★★ 5
Nice divider, serves it's purpose well!
Size: 3 Panel 12FT W
This room divider worked out very well for what I needed. I wanted a simple way to create a little more privacy and separation in a larger room without doing anything permanent, and this divider was an easy solution. The panels provide good coverage, and the black color gives it a clean, modern appearance that blends in nicely with different décor styles.
Assembly was fairly straightforward, and once set up, the wider feet helped keep the divider stable on the floor. I was especially happy with how flexible the panels are to arrange. You can keep it mostly straight, angle it around furniture, or create a more enclosed private space depending on the layout you need.
The material allows light to filter through slightly while still offering a noticeable sense of privacy. I’ve used it for separating a workspace area, but it would also work well in bedrooms, apartments, dorms, studios, or shared living spaces. Another plus is that it can be folded and moved without too much effort when you want to change the setup.
Overall, this divider delivers a good balance of functionality, portability, and appearance. It’s a practical option for anyone needing temporary room separation without installing permanent walls or curtains.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026