Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 10 - Jul 15
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
SunCoast Category 2 10R140 Expanded Capacity Transmission 18-24 Ford 6.7L PowerstrokeWe demand a lot of performance out of our trucks these days. Hotter temperatures on highways and in cities, heavier workloads, longer haul times and stretched out maintenance schedules all contribute to the failure of components we've become used to trusting with our livelihood and lives. In a situation where the 10R140 fails in the 2018 2024 Ford Super Duty, trust that SunCoast has a cost effective solution that was developed and upgraded to perform
We demand a lot of performance out of our trucks these days. Hotter temperatures on highways and in cities, heavier workloads, longer haul times and stretched out maintenance schedules all contribute to the failure of components we've become used to trusting with our livelihood and lives. In a situation where the 10R140 fails in the 2018-2024 Ford Super Duty, trust that SunCoast has a cost-effective solution that was developed and upgraded to perform above and beyond the factory transmission. With upgraded filters, clutch materials and quantity, new hardware and programming, over 30 years of experience is evident in SunCoasts Category 2 offering.
Newly Designed Thermal Flow Control Filter
The Suncoast Category 2 10R140 transmission comes with a new factory filter to ensure zero flow issues. Raybestos Powertrain GPZ friction plates greatly increase transmission performance and durability. This state-of-the-art friction material far exceeds factory material to withstand high stress, high temperatures and repeated cycling. GPZ's outstanding performance benefits is perfect for heavy-duty vehicles and high-stress driving. Testing of GPZ's revolutionary friction material shows that it outperforms factory installed materials by as much as 20%. For a bonus fun fact, its performance improves as the power increases.
Advantages:
- Withstands high horsepower
- Greater torque capacity
- Maintains piston travel
- Optimum performance
- Higher heat resistance
- Smooth engagements
- Enhanced shift feel
The 10R140 transmission, while a very capable unit, has its deficiencies just like anything else when it is asked to perform outside its original design intention. Since its debut, Suncoast has been actively involved in the research and development of upgrades of this newer platform. With SunCoasts active partnership with Raybestos powertrain, they deliver you the best product to date within the 10R140 platform. The Suncoast Category 2 10R140 transmission expanded capacity clutch modules that are included increase the longevity and performance of these 10 speed transmissions.
Suncoast addressed the issue by improving the clutch friction properties with Raybestos GPZ material and increasing clutch capacity by an impressive 20%. This takes the clutch stack from a factory 5-clutch stack up to a 6-clutch stack-up. They simultaneously address heat issues with both improved friction coefficient, as well as increasing surface area. This Suncoast 10R140 transmission "High-Capacity E-Clutch" comes completely assembled and stacked up with a new (not used) OE machined drum, piston and backing plate.
The "E" Clutch
The 10R140 transmission has a pair of troublemakers, the "E" clutch is certainly one of them. The other thorn in your side would be the "F" clutch. The "E" clutch in a 10R140 transmission, is engaged in 1,3,5,6,7,8, and 9th gears. The real issue becomes apparent rather quickly. This clutch is cycled on 3 times and off 2 times by the time you are in 5th gear. The clutch is on in 1st then cycled off in 2nd, cycled back on in 3rd, then back off in 4th...only to be cycled back on in 5th gear. In higher-horsepower or higher-demand towing and hauling situations, this constant cycling on and off can lead to premature failure.
The "F" Clutch
This clutch is also prone to premature wear as has been observed in other Lepelletier Ravigneaux Gear sets. Oncoming clutches in higher gears seem to take the blunt of the beating. With the 0R140 transmission, the "F" clutch is no exception. The "F" clutch is engaged in R,4,5,6,7,8 and 9th gears. The quickest path to early or premature degradation to this clutch pack is wide open throttle or heavy-load-indexed 3rd to 4th shifts. This is especially prominent in applications where torque management has been deleted. Suncoast has corrected this issue by adding 25% more capacity to this clutch pack by adding another clutch to make 5 in this particular clutch pack.
Main Pressure Regulator Valve Kit
Wear in the main pressure regulator bore and on the outboard spool area of the valve is common in listed Ford 10-speed transmissions. This wear minimizes line pressure control resulting in delayed shift engagement, poor shift quality and burnt clutches. Wear at the inboard spool and bore can lead to converter application issues.
By installing a drop-in Sonnax main pressure regulator valve kit, SunCoast eliminates the leakage of line pressure signal oil to exhaust with the incorporation of an extended front valve spool. This valve spool is 270% longer than the OE spool, so actuates in unworn areas of the bore. The O-ringed end plug provides a positive seal and prevents critical signal fluid from leaking to exhaust. Both Sonnax features ensure your units will have proper line pressure control through all drive ranges.
Each Suncoast 10R140 transmission gets this modification to the factory 10R140 Valve Body:
- Extended outboard spool is 270% longer than OE and actuates in unworn areas of the bore
- O-Ringed end plug provides positive seal to prevent critical signal fluid from leaking to exhaust
- Hardcoat anodized aluminum valve combats premature wear
- Drop-in Zip Valve parts install quickly and easily
Heavy linear force solenoids (LFS) in Ford 10-speed transmissions are held in place by small spring retainers that are prone to collapse. When the retainers collapse, the solenoid wobbles in the bore, causing damage to the casting at the clutch valve bore opening. These LFSs actuate by extending a small pintle about .090" to stroke the inboard clutch control valve. When the spring retainer collapses and the LFS is off-center, the pintle cannot stroke the clutch control valve appropriately, resulting in shift complaints and converter issues. Valve body damage can also occur if the LFSs remain loose, resulting in valve damage during rebuild.
SunCoast uses Sonnax solenoid stabilization retainer 105740-19K to replace the factory clips providing 32% more surface area to create more support for the solenoid. Another SunCoast design upgrade is the top of the clip is rolled over to create a positive stop for the flexible side to land against, furthering the prevention of retainer collapse.
Each Suncoast 10R140 transmission gets this modification to the factory 10R140 Valve Body:
- 32% More casting-to-solenoid surface area for better support and leverage
- Positive stop retainer feature to prevent collapse
- Drop-in Zip Valve parts install quickly and easily
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.7 ★★★★★
Based on 933 reviews
Sort
Product Reviews
★★★★★ 5
Came in skeptical, but it's GREAT!
I read all the bad reviews I could on this thing and considered it an acceptable risk considering the price.
Assembly was easy and the instructions were fair. Not amazing, but once you handle the edger, the gist is clear.
I was skeptical overall that the horsepower and plastic guard weren't going to be enough. I ran it for nearly 45min stopping every 5 or so to check the blade and guard. It stayed tight and I was able to manually turn the blade to make sure it was working right. My front yard and sidewalk have been neglected for a few years. I would sometimes edge it out with the weed Wacker, but couldn't get it as clean as I wanted without breaking a LOT of line.
When I was done, I noticed the guard had a lot of soil and grass buildup that I was able to take out easily with my fingers. There were a few times I scraped the sidewalk edge, but the blade is still solid and ready for more!
I was surprised at the quality and as you're going over an area, it feels solid and not squirly or out of control. My uses are going to be mostly suburban maintenance on my own yard. If I had more land or something bigger, I would consider something larger. For my yard and purposes, this edger is going to work just fine!
Did not notice any issues with the blade getting loose, but stayed aware of it. There is a lock nut that keeps it in place. I imagine over time and switching blades, this is going to lose its locking function, but I already see amazon has replacement blades that come with new lock nuts!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 5, 2025
★★★★★ 5
Works great, easy assembly and no issues!
Using the weedeater for edging was too hard, so I purchased this. It works great! It was easy to assemble and easy to use. My lines are perfect, but the size, durability, and power of this gem get the job done, and it's lightweight enough that I can easily maneuver it around the yard. I chose a corded one so I don't have to deal with battery life or charging.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 26, 2025
★★★★★ 5
Great Fans!!
We bought 3! This is second set of fans we buy. The blow a great amount of air. The quality is great and install was easy. The app works great and is simple! You can control the fans thru app. Great fans!! Highly recommend!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 20, 2024
★★★★★ 5
Amazing fan
Work with Alexa or you can use the remote control, easy installation, a perfect size, look beautiful, best price.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
★★★★★ 5
Best fan ever
Fan works great, light is more than bright enough to light a large room, fan is great, on high it will provide more air than you will ever need, also works with Alexa flawlessly so that you dont even need the remote or your phone.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 20, 2025