Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 6 - Jul 11
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Bell RS7 Carbon Helmet Size 57- cmBased on the HP7 design and featuring an ultra lightweight carbon shell using Bells high pressure proprietary molding system, the RS7 Carbon uses an innovative shell and shield design to improve acoustic comfort, aerodynamic performance and energy absorbing capacities. The sleek, aerodynamic design features an advanced ventilation system with 14 intake and extraction channels with air intake covers. The RS7 Carbon is available in three versions: RS7
Based on the HP7 design and featuring an ultra-lightweight carbon shell using Bell’s high-pressure proprietary molding system, the RS7 Carbon uses an innovative shell and shield design to improve acoustic comfort, aerodynamic performance and energy absorbing capacities. The sleek, aerodynamic design features an advanced ventilation system with 14 intake and extraction channels with air intake covers. The RS7 Carbon is available in three versions: RS7 Carbon, RS7 Carbon with Ear Cups, RS7 Carbon with Front Chin Bar Gurney. Features:
- Based on the Innovative HP7
- Ultra-lightweight carbon shell
- High-pressure molding system for improved shell strength
- Advanced multi-density, multi piece liner to maximize energy absorption and impact performance
- Hollow synthetic rubber gasket seal ensuring that air and water can’t penetrate into the helmet
- Multi-piece, multi-density high-impact custom bead absorbing liner for low and high velocity impact protection
- Aerodynamic accessories including chin bar and top gurneys and rear spoiler (sold separately) for improved aero performance and stability at high speeds
- Adaptable for closed car forms of racing with top forced air inserts including eyeport, 8 hole and 10 hole options to improve internal ventilation when used with forced air system (sold separately)
- Integrated channels in the face piece offer multiple options to install integrated drinking tube systems and radio microphone systems
- Ultra plush grey comfort-max FR interior fabric for improved comfort and superior moisture wicking properties
- Narrow size eyeport
- SE07 3MM DSAF Shield (SV SE07 pivot system) – clear shield
- Double screen anti-fog (DSAF) visor insert For Improved anti-fog Pperformance
- M6 terminal hardware for head and neck restraint devices
- Draw string helmet bag included
- Hex wrench included
- Carbon finish
- Snell SA2015 homologation
- FIA8859-2015 homologation
Size chart
| Standard Size | Hat Size | Inches | Centimeters |
|---|---|---|---|
| 4XS | 6 3/8 | 20 1/16 | 51 |
| 3XS | 6 1/2 - 6 5/8 | 20 1/2 - 20 7/8 | 52-53 |
| 2XS | 6 3/4 - 6 7/8 | 21 1/4 - 21 5/8 | 54-55 |
| XS | 7 | 22 | 56 |
| S | 7 1/8 | 22 3/8 | 57 |
| M | 7 1/4 - 7 3/8 | 22 3/4 - 23 1/4 | 58-59 |
| L | 7 1/2 | 23 5/8 | 60 |
| XL | 7 5/8 - 7 3/4 | 24 - 24 3/8 | 61-62 |
| 2XL | 7 7/8 - 8 | 24 3/4 - 25 1/4 | 63-64 |
| 3XL | 8 1/8 - 8 1/4 | 25 5/8 - 26 | 65-66 |
| 4XL | 8 3/8 - 8 1/2 | 26 3/8 - 26 3/4 | 67-68 |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.0 ★★★★★
Based on 525 reviews
Sort
Product Reviews
★★★★★ 1
Issues with mounting the shelves, big time
Color: Brown, Size: 55.1"W x 10.3"D x 1.8"H, Set of 2
I bought the 55 inches floating shelves. I have an area above my linen cabinet that I wanted to utilize for storage and books in my hall. I did my measuring, figured out spacing. Marked everything off to do 3 total shelves (bought two boxes). A couple of spots screwed into a stud, and the others I had to install the plastic mount things. I had used those before so I just did the predrill then tapped them in, finished off by screwing the mount flush with the wall. I grabbed the first bracket and decide to start with a screw that had one of the inset mount things (sorry the correct term is escaping me). It never once occurred to me to check that the plastic mount and screw would not work. We’ll surprise! I tried and tried to get the screw to screw thru the mount, the mount is the rigid plastic thoe that is supposed to split when the screw goes through. Well something wasn’t engineered properly on the mounts cuz they would not thread a screw. They would not split. I even went into my garage and tried different screws I had to see if maybe it was just too big…or something. Then I started just prying it apart and could not get it to split like it’s supposed to, the tip piece broke off before the piece split. I have never had this situation before. I now have a bunch of these, that leave huge holes in my wall, where I measured out for a shelf to go.
I’m not a huge DIYer so now I’m trying to figure out if I can salvage this situation but I’m afraid that if I get different mounts they will be too small for the already created holes, or they will fit the hole but because it’s screwing into dry wall, the drywall already has threads from the other mount, will it strip if the threads aren’t 100% the same. Oooooor am I going to have to patch up and paint that wall, then buy new mounts and attempt to try again….which I will now have to set the shelves at a different height so I don’t screw into the same holes I patched since I don’t trust them…..ugh. I practically want to cry. lol.
So if I could give this negative stars I would! I feel stupid due to these having such great reviews by others. Comments of how easy they were to install. I will also mention that a few others mentioned the metal bracket that is mounted to the wall then the shelf slide onto is very flimsy. I could bend it side to side with my hands. The only reason I decided it would be ok is that there are a total of 8 screws in the mount, figured it would be stable enough.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 14, 2025
★★★★★ 5
Was so easy to put up.
Love it
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
★★★★★ 4
Decent Quality. Look Great
Color: Brown, Size: 35.7"W x 10.3"D x 1.8"H, Set of 2
These are easy to install and the shelf has a good quality look. The only thing lacking is the quality of the bracket. The arms are thin metal and I feel like it won’t hold much weight.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 4, 2025
★★★★★ 5
Looks good.
Color: Grey, Size: 55.1"W x 10.3"D x 1.8"H, Set of 2
They look good in my den!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 22, 2026
★★★★★ 5
Great quality and easy install
Color: White, Size: 55.1"W x 10.3"D x 1.8"H, Set of 1
Great quality. Very easy install. Mounted mine above my fireplace to create a mantel. Looks like it was there from the day the apartment was built. So far it has held a good bit of weight with heavy ceramic decor and one very fat cat jumping up on it lol.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 22, 2025