Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 9 - Jul 14
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Esab Dual Shield 7100 Ultra .045" x 33 LB SpoolFlux Core DS 7100 ULT Welding Wires, . 045 in Dia., 33 lb Spool Like many other Dual Shield products, Dual Shield 7100 Ultra operates in a wider parameter range and generates less welding fumes than many similar welding wires. The low spatter levels and easy slag removal minimizes post weld cleanup. Dual Shield 7100 Ultra can be used with either 100% CO2 or 75% Ar 25% CO2. This versatility in gas selection provides the fabricator greater flexibility
Flux Core - DS 7100 ULT Welding Wires, .045 in Dia., 33 lb Spool
Like many other Dual Shield products, Dual Shield 7100 Ultra operates in a wider parameter range and generates less welding fumes than many similar welding wires. The low spatter levels and easy slag removal minimizes post weld cleanup. Dual Shield 7100 Ultra can be used with either 100% CO2 or 75% Ar/25% CO2. This versatility in gas selection provides the fabricator greater flexibility in choosing both wire and gas.
Typical Weld Metal Analysis %
| Typical Weld Metal Analysis % | ||||||||||||||
| C | Mn | P | S | Si | ||||||||||
| 100% CO2 | ||||||||||||||
| 0.02 % | 1.3 % | 0.010 % | 0.013 % | 0.5 % | ||||||||||
| 75% Ar - 25% CO2 | ||||||||||||||
| 0.03 % | 1.6 % | 0.010 % | 0.012 % | 0.6 % | ||||||||||
Approvals
| Approvals | ABS BV CWB CSA W48; E491T-9-H8, E491T-9M-H8 DNV-GL LR |
| Approvals are based on factory location. Please contact ESAB for more information. |
Typical Charpy V-Notch Properties
| Impact Value | Testing Temperature |
| 34 J(25 ft-lb) | -29 degC(-20 degF) |
| 58 J(43 ft-lb) | -18 degC(0 degF) |
| 57 J(42 ft-lb) | -18 degC(0 degF) |
| 47 J(35 ft-lb) | -29 degC(-20 degF) |
Classifications
| AWS A5.36 : E71T1-C1A2-CS1-DH8 AWS A5.20 : E71T-9C-DH8 AWS A5.36 : E71T1-M21-CS1-DH8 AWS A5.20 : E71T-1C-DH8 ASME SFA 5.36 : ASME SFA 5.20 : AWS A5.20 : E71T-1M-DH8 AWS A5.20 : E71T-9M-DH8 |
Consumable Characteristics
| Welding Current | DC+ |
| Alloy Type | C Mn |
Typical Tensile Properties
| Condition | As Welded | As Welded |
| Shielding Gas | 100% CO2 | 75% Ar - 25% CO2 |
| Tensile Strength | 585 MPa(85 ksi) | 605 MPa(88 ksi) |
| Yield Strength | 515 MPa(75 ksi) | 540 MPa(78 ksi) |
| Elongation | 26 % | 26 % |
Recommended Welding Parameters
| Current | TTW Dist. | Voltage | Wire Diameter | Wire Feed Speed |
| 100% CO2 | ||||
| 135-205 A | 9.5-12.7 mm(3/8-1/2 in.) | 23-26 V | 1.2 mm(.045 in.) | 381-660 cm/min(150-260 in./min) |
| 205-230 A | 12.7-19 mm(1/2-3/4 in.) | 25-27 V | 1.2 mm(.045 in.) | 660-965 cm/min(260-380 in./min) |
| 230-265 A | 19-25.4 mm(3/4-1 in.) | 26-30 V | 1.2 mm(.045 in.) | 965-1321 cm/min(380-520 in./min) |
| 125-235 A | 12.7-16 mm(1/2-5/8 in.) | 23-26 V | 1.4 mm(.052 in.) | 279-584 cm/min(110-230 in./min) |
| 235-290 A | 16-19 mm(5/8-3/4 in.) | 25-29 V | 1.4 mm(.052 in.) | 584-864 cm/min(230-340 in./min) |
| 290-350 A | 19-25.4 mm(3/4-1 in.) | 29-31 V | 1.4 mm(.052 in.) | 864-1194 cm/min(340-470 in./min) |
| 165-270 A | 16-19 mm(5/8-3/4 in.) | 25-28 V | 1.6 mm(1/16 in.) | 279-508 cm/min(110-200 in./min) |
| 270-345 A | 19-25.4 mm(3/4-1 in.) | 27-30 V | 1.6 mm(1/16 in.) | 508-762 cm/min(200-300 in./min) |
| 345-415 A | 25.4-31.75 mm(1-1.25 in.) | 28-32 V | 1.6 mm(1/16 in.) | 762-1067 cm/min(300-420 in./min) |
| 110-135 A | 9.5-12.7 mm(3/8-1/2 in.) | 23-25 V | 0.9 mm(.035 in.) | 559-838 cm/min(220-330 in./min) |
| 135-160 A | 12.7-16 mm(1/2-5/8 in.) | 24-28 V | 0.9 mm(.035 in.) | 838-1118 cm/min(330-440 in./min) |
| 160-185 A | 16-19 mm(5/8-3/4 in.) | 26-30 V | 0.9 mm(.035 in.) | 1118-1397 cm/min(440-550 in./min) |
| 75% Ar - 25% CO2 | ||||
| 115-145 A | 9.5-12.7 mm(3/8-1/2 in.) | 23-25 V | 0.9 mm(.035 in.) | 1118-1397 cm/min(440-550 in./min) |
| 145-165 A | 12.7-16 mm(1/2-5/8 in.) | 24-27 V | 0.9 mm(.035 in.) | 1118-1397 cm/min(440-550 in./min) |
| 165-190 A | 16-19 mm(5/8-3/4 in.) | 25-30 V | 0.9 mm(.035 in.) | 1118-1397 cm/min(440-550 in./min) |
| 130-200 A | 9.5-12.7 mm(3/8-1/2 in.) | 22-26 V | 1.2 mm(.045 in.) | 381-660 cm/min(150-260 in./min) |
| 200-225 A | 12.7-19 mm(1/2-3/4 in.) | 24-27 V | 1.2 mm(.045 in.) | 660-965 cm/min(260-380 in./min) |
| 225-265 A | 19-25.4 mm(3/4-1 in.) | 27-29 V | 1.2 mm(.045 in.) | 965-1321 cm/min(380-520 in./min) |
| 135-250 A | 12.7-16 mm(1/2-5/8 in.) | 22-26 V | 1.4 mm(.052 in.) | 279-584 cm/min(110-230 in./min) |
| 250-295 A | 16-19 mm(5/8-3/4 in.) | 25-29 V | 1.4 mm(.052 in.) | 584-864 cm/min(230-340 in./min) |
| 295-355 A | 19-25.4 mm(3/4-1 in.) | 27-31 V | 1.4 mm(.052 in.) | 864-1194 cm/min(340-470 in./min) |
| 185-285 A | 16-19 mm(5/8-3/4 in.) | 24-28 V | 1.6 mm(1/16 in.) | 279-508 cm/min(110-200 in./min) |
| 285-340 A | 19-25.4 mm(3/4-1 in.) | 27-30 V | 1.6 mm(1/16 in.) | 508-762 cm/min(200-300 in./min) |
| 340-400 A | 25.4-31.75 mm(1-1.25 in.) | 28-32 V | 1.6 mm(1/16 in.) | 762-1067 cm/min(300-420 in./min) |
Deposition Data
| Current | Deposition Rate | Diameter | Efficiency (%) | Voltage | Wire Feed Speed |
| 100% CO2 | |||||
| 192 A | 2.5 kg/h(5.5 lb/h) | 1.2 mm(.045 in.) | 79 % | 25.5 V | 762 cm/min(300 in./min) |
| 230 A | 3.3 kg/h(7.4 lb/h) | 1.2 mm(.045 in.) | 82 % | 27 V | 1016 cm/min(400 in./min) |
| 275 A | 4.4 kg/h(9.6 lb/h) | 1.2 mm(.045 in.) | 83 % | 28.5 V | 1270 cm/min(500 in./min) |
| 150 A | 1.6 kg/h(3.6 lb/h) | 1.4 mm(.052 in.) | 76 % | 23.5 V | 381 cm/min(150 in./min) |
| 190 A | 2.2 kg/h(4.9 lb/h) | 1.4 mm(.052 in.) | 78 % | 24 V | 508 cm/min(200 in./min) |
| 250 A | 3.5 kg/h(7.7 lb/h) | 1.4 mm(.052 in.) | 82 % | 25.5 V | 762 cm/min(300 in./min) |
| 300 A | 4.7 kg/h(10.3 lb/h) | 1.4 mm(.052 in.) | 83 % | 27 V | 1016 cm/min(400 in./min) |
| 105 A | 1.3 kg/h(2.8 lb/h) | 0.9 mm(.035 in.) | 86 % | 24 V | 635 cm/min(250 in./min) |
| 140 A | 2.1 kg/h(4.6 lb/h) | 0.9 mm(.035 in.) | |||
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.7 ★★★★★
Based on 1169 reviews
Sort
Product Reviews
★★★★★ 5
Good
Format: Paperback
This is great! I like this one.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 22, 2016
★★★★★ 2
Good to have if you've never seen the iTEP exam, but don't rely on it to boost your scores
Format: Paperback
This book is good in that it comes with two practice tests: one in the beginning of the book, one in the end of the book. The grading rubric is helpful too. However, the actual guide part of the book, doesn't help too much with how to improve test scores. What I like least about this guide is that it won't tell you which questions you answered incorrectly on the practice exams. A good test prep guide will tell you what you answered incorrectly, and will tell you what logic to follow to get to the correct answer. In the reading passages, it would be nice to know where I can find evidence to justify the "correct" answer. In the grammar section, it would be nice to know which rule I'm violating. Any test guide should always come with some testing strategies. I.E. If this question is taking up too much time, skip it and go to the next one. This guide lacks simple strategies like that. Simple strategies like that could be useful when incorporated into this guide because there are certain sections on the exam that you can go back to previous questions, but some sections where the "back" button is disabled.
Overall, if you've never seen an iTEP exam before, this book is certainly helpful in that it will give you an idea of what you will be testing for. However, this book alone won't help you achieve a score of 6. The table of contents itself will tell you there are only 86 pages of actual content covering test material. That's not enough to cover how to excel in the exam.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 27, 2015
★★★★★ 1
Don't buy it
Format: Paperback
It does not prepare for the real test.
Using it is absolutely not enough to be approved with good grades.
Too expensive for what it offers.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 21, 2016
★★★★★ 5
Five Stars
Format: Paperback
great
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 18, 2016
★★★★★ 5
go o o o o
Format: Paperback
go o o o o d
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 21, 2014
recommand products
Mayhew Tools 31934HT Pneu Separating Fork 1-3/16" X 7", Hang Tag
84.89
King Shocks Shaft .875 Dia 16 16.00 - 25013-064
75.05
King Shocks End Cap .625 BRG ID No Port .375 Ext - 25004-018
105.45
King Shocks 2005+ Ford F-250 4WD Front 2.5 Dia Remote Reservoir Shock w/Adj for 1-2.5in Lift (Pair) - 25001-372A
654.55
Mayhew Tools 31982HT Pneumatic Hammer 1" X 4", Hang Tag
34.19