SKU: 51669385026

Mazda 6 MPS (1st Gen) Front Bumper Repair Plates V2 - Pair

Sale price$48.60 Regular price$54.00
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 14 - Jul 19

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Mazda 6 MPS (1st Gen) Front Bumper Repair Plates V2 - PairThese stainless steel plates are designed to repair and upgrade damaged side tab attachment holes for the OEM Mazda 6 MPS 1st gen front bumper.? This is a new and improved design, not only to repair the broken damaged tabs on the front bumper, but to address the common issue of the bumper sticking out. This issue may be caused from the tabs not hooking onto the plastic retainer hooks. This improved design features an added metal tab on the plates to

These stainless steel plates are designed to repair and upgrade damaged side tab attachment holes for the OEM Mazda 6 MPS 1st gen front bumper.?ÿ

This is a new and improved design, not only to repair the broken damaged tabs on the front bumper, but to address the common issue of the bumper sticking out. This issue may be caused from the tabs not hooking onto the plastic retainer hooks. This improved design features an added metal tab on the plates to act as a 'hook' which helps the bumper tabs hook onto the retainers to improve the connection.

The V2 also features a full length design to reinforce and repair all the side bumper tabs and not only just the screw hole.

To install, simply sand down & clean surfaces on the damaged bumper tabs and the repair plates. Then simply glue the plates in place. Apply evenly spread pressure with clamps?ÿwhilst itƒ??s drying.

Recommended adhesive: JB Weld Plastic Bonder 25mL Black 50139 (not included).?ÿ







Note:

The photo of the white bumper is from a Toyota 86 which experiences the same issue of the tabs not hooking onto the retainer brackets.

JT Spec products are sold for off-road use only. All performance modifications and installations are performed at the customer's own risk.?ÿJT Spec?ÿholds no responsibility either implied or otherwise for mechanical, electrical, or other failure when using an aftermarket performance product, and expressly denies such responsibility.?ÿJT Spec?ÿmakes no representations and assumes no responsibility for the legality of such items. Products sold for off-road use may be?ÿillegal in some?ÿstates and provinces, and are intended for vehicles which may never be used on a ?ÿpublic road.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 51669385026

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.0 ★★★★★
Based on 1777 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
Tharin
Dallas, US
★★★★★ 5
BUY THIS ONE!
Model: NewSLS50_52
This is one of the good ones. There are other brands just as good, and manny brands are worse, but this handles well, rolls down easily, doesn't come off at all easily, and adapts to dips and curves like a champ. Appropriately heavy and dead, I'm happy with the way it smothers panel resonances and even at muffling direct sound, like a big hand over my Uncle Harry's eternally noisy mouth. You can rip the foil but you have to work hard at doing that. Remember to buy a brayer; you can roll overlaps nice and thin. Also remember to pre-wipe the sheet metal with a decent solvent like acetone or Stoddard/Varsol. It should last forever.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 26, 2025
H
Verified Purchase
Harvey
Fort Morgan, US
★★★★★ 5
Good stuff, but watch the temp
Model: NewSLS50_52
I used this in my single cab pickup truck (89 ford.) It only took half the box (10 sheets or 25 square feet) to do the floors, but I bought the big box because I plan to do the doors, back wall, and maybe the roof as well. One thing I learned is that the temperature matters when you’re doing the installation. It was around 55F when I started in the evening, and when it dipped down into the 40s the sheets would not stick to the metal, and were hard to compress with the roller. That’s why I ended up only doing the floors and not any vertical surfaces; i will have to wait for a nice hot day. The other thing is that the foil layer on top is razor sharp at the edges, definitely wear gloves! I didn’t notice until after but I have little papercuts all over my fingers. Aside from those things, the install was easy and straightforward. The sheets cut easily with scissors, and any goo that ends up on your hands or scissors can be cleaned up with acetone (nail polish remover), or lacquer thinner. I would use this stuff again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 16, 2023
L
Verified Purchase
Lyrah
Dallas, US
★★★★★ 5
Very efficient!
Model: NewSLS50_52
Amazing the difference it makes on dumping the noise. Very easy to install. Pell and stick literally! Great!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 23, 2025
A
Verified Purchase
Alexis
Alexandria, US
★★★★★ 5
Supports DP Alt + Power Delivery from one source
This is one of the very, very few USB-C hubs out there that successfully pushes DisplayPort Alt and 100w PD functionality from one source cable to one device. My monitor has a USB-C DP alt port that also pushes 95w PD and this hub successfully pushes both of those to my laptop, phone, and android handheld console. The marketing material says something about USB PD cannot work with DP alt, but it seems to be working fine for me so who knows. With this little hub in-between the link from the monitor to the device, I can now add a USB ethernet adapter and game controller, and I only ever have to plug one USB-C cable into my device (and I am using a USB4 extension cable with no issues as well) and it all works perfectly!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 21, 2026
M
Verified Purchase
Mark N.
Carnegie, US
★★★★★ 5
Supports Reverse Charging a Laptop on Monitors with USB-C PD!
This adapter is unique in that it supports reverse charging + video on the same port. I use this with an LG monitor (60W PD) and an M1 Pro Mac. At first, I had connectivity issues: hub was disconnecting and reconnecting every few seconds. I followed advice to update the firmware on the hub, but that didn't solve the issue. Turns out, my monitor also needed a firmware update. Once I updated the monitor firmware, it stabilized and has been working great ever since.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 4, 2025

recommand products