SKU: 48922489486

M12B-P 1.6cc Single Cylinder 4 Stroke Gasoline Watercooled Engine Model with Gear Reducer

Sale price$225.00 Regular price$250.00
Save 10%

Pay in installments of $62.50 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 15 - Jul 20

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

M12B-P 1.6cc Single Cylinder 4 Stroke Gasoline Watercooled Engine Model with Gear ReducerM12B P 1. 6cc Single Cylinder 4 Stroke Gasoline Watercooled Engine Model with Gear Reducer Features:. This is a mini single cylinder four stroke engine with a water cooled heat dissipation structure and an adjustable speed carburetor.. The unique and exquisite engine model is made of brass and stainless steel, with a reduction gear box that is more unique. The engine is fixed on a wooden base for easy placement and operation. . Engine Start Steps: 1.

M12B-P 1.6cc Single Cylinder 4 Stroke Gasoline Watercooled Engine Model with Gear Reducer


Features:


.This is a mini single-cylinder four-stroke engine with a water-cooled heat dissipation structure and an adjustable speed carburetor.
.The unique and exquisite engine model is made of brass and stainless steel, with a reduction gear box that is more unique. The engine is fixed on a wooden base for easy placement and operation.


.Engine Start Steps:

1. Check the engine wiring from the wooden base, connect the fuel tank tubing, and install 1.5V AA batteries;

2. Fill the fuel tank with 95# gasoline or zippo kerosene. After the filling is complete, place the flywheel on The right side of the engine (the surface of the power switch) rotates clockwise many times, which can make the mixed fuel completely enter the cylinder to ensure that there is no air in the fuel pipe;

3. Turn on the power switch, and then quickly turn the flywheel clockwise to move it to the right (Power switch surface) Start the engine.


.Notes:

1. If the ignition device is normal and the cylinder compression is normal, the machine cannot start normally, it is likely to need to adjust the carburetor oil needle;

2. After tightening the main oil needle on the carburetor, loosen 1/ 4 laps and start the flywheel to make the mixing ratio of gasoline and air reach the normal working mixing ratio;

3. When the machine stops running, turn off the power switch.
.Excellent Gift: This exquisite engine model is not only a desktop decoration model, but also a model for collection. It is an excellent personalized gift for mechanical crafts model lovers.


.If you have any questions about the product or usage problems, please contact us in time, and we will try our best to solve it for you.


.Age: 14+

Specifications:

.Color: As Shown
.Material: Brass + Stainless Steel + Wood
.Engine Size: 95 x 85 x 97mm
.Wooden Base Size: 200 x 120 x 30mm
.Displacement: 1.6CC
.Cylinder Diameter /bore: 13mm
.Stroke: 12mm
.Flywheel Diameter: 56mm
.Ignition Device Power Supply Voltage: AA batteries (not included)
.Starting Method: External force (electric drill) or hand pull start
.Fuel: Gasoline or zippo kerosene
.Product Dimensions: 20 x 12 x 12.7cm
.Product Weight: 1254g
.Package Dimensions: 25 x 25 x 25cm
.Package Weight: 1700g
.Packing: Box

Package Content:

.1 x Engine
.1 x Hand Puller
.1 x Manual

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 48922489486

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 5 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
K
Verified Purchase
Kai Fillmore
Massapequa, US
★★★★★ 5
Another excellent Anker product!
Size: 1pack, Color: Black, Size: 1pack, Color: Black
Light weight, compact enough to pack away for travel, and doesnt make my phone hot. I've never been much for wireless charging given its slow speed. However my phone likes to glitch when it fully dies, saying there's water in the charge port when there's no water or debris. Meaning it wont take a charge thru the type C port, thus a wireless charger became nessicary. I have 2 Anker battery packs and love them both, they're high quality, affordable, and versatile. This Anker 313 wireless charging stand is no exception to Anker's reputation for quality and durability. I've found myself using it far more than I thought I would! If you're looking for a solid stand with wireless charging this is a great choice!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 11, 2026
M
Verified Purchase
metrology dufus
Belleville, US
★★★★★ 4
These are very nice but limited life
Size: 1pack, Color: Black, Size: 1pack, Color: Black
I got a couple of these for my wife's iphone 8+. They really are great in all charging respects when fed with a high power supply. But be aware they probably will not have long life. It depends on how often you plug/unplug the charger cord, and how you manhandle the charger itself. What I hate about these is the use of the USB micro charging port. If Anker were to use a USB type C charging port -maybe the lifespan would be greater. But I doubt it. This is why a 5 star item becomes a 3 star. The problem with USB ports as a power connector is that most people are rather klutzy with this connector while plugged into the charger's port. The USB micro connector socket is a very flimsy structure and not suited to heavy use (many plug/unplug or move cycles). If you are clumsy with plugging in the cable, you bend the outer metal housing that both guides the connector in while plugging, and also holds fast the connector so the contacts mate and remain in contact. Same is true if you move the charger body...it flexes the power cord which in turn wobbles the connector. Another great way to mangle the connector is moving or dropping the charger's body while the cord is connected. Anything that wobbles the cord while connected tends to waller out the USB port and after enough slop, the charger can become inoperative. Once the geometry of the housing is compromised, the electrical power connection becomes flaky (intermittent) and then you have a charger that may or may not work. So then you have a phone without the expected recharge. For most people this forces them to discard and re-purchase the charger. Call it designed-in obsolescence (shortened lifespan). I have seen this across a wide range of electrical items. Anything that uses the USB mini or micro port as an electrical path for the sole purpose of energy transference will eventually fail. USB type A (large rectangular) is less affected by this due to the heavier, robust structure. For me, I repair these by simply installing a permanently connected power cord. Soldered directly to the charger's circuit board. This is not something most people can do, and it requires intrusive access to the charger. On this model there are no screws to gain access to the connector and PCB...the case is permanently glued together. If Anker wanted to provide a better solution, they would deploy these with a barrel connector/power pack, but they play this game with the consumer forcing them to buy a separate, high-power pack that must be USB. bleah! Update 10 July 2023 Anker was graceful in contacting me the day after submitting this review and offering a full refund. Admittedly, I wrote this, feeling a bit frustrated that the product failed, but surprised with Anker's response with a request they be given another chance. Very commendable in today's world. +1 star for their diligence. Re: Duly noted. I'm sorry to have reported my experience with this product but it is the truth. Thanks but no thanks for the refund offer. I hardwired a power cord to the charger and now it works without intermittent behavior thus sustaining its use. Another chance? Of course. I like the product (and Anker) but do not like the micro USB connector it uses. I may follow up with a secondary comment on the rapidity of your response. This was a generalized comment for the industry to consider. I only apologize that it was targeted solely at Anker. You are not alone. Many of your competitor's products use the same connector so the consumer has little choice but to accept the limitations -or choose a product that does NOT use the mini or micro USB connector. Good luck with that.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 8, 2023
K
Verified Purchase
K. Connor
Cuba, US
★★★★★ 5
Anker is the only option for your charging needs
Size: 1pack, Color: Black
The Anker 313 charging stand is a simple, reliable wireless charger that works great for my everyday use with my iPhone 16 Pro, especially for overnight charging. It’s a straightforward iPhone-compatible stand that may not be the best for speed, but this actually makes it ideal for bedside use. One of the best features is that it charges through thicker cases. My phone has a fairly bulky case and it still charges without any issues. Its magnet isn't strong, but it will do the job. As I noted, charging speed is moderate rather than fast. So it won’t top up your battery quickly during the day, but that’s actually perfect for overnight use since it charges steadily without generating excessive heat concerns. The stand design is also convenient because you can keep the phone upright for notifications or Face ID, and it can even charge in landscape orientation if you want to watch videos while it’s docked. Overall, the Anker 313 is a great budget-friendly wireless charger that does exactly what it needs to do. It is dependable charging, good case compatibility, and a stable stand design. It’s not meant to be the fastest charger, but for a nightstand setup with an iPhone 16 Pro, it’s a practical and reliable option. You can't go wrong with this one.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 6, 2026
R
Verified Purchase
Rose
Phoenix, US
★★★★★ 5
it works and it hasn’t failed me!
Size: 1pack, Color: Black
i’ve had this phone charger for a year and it works well! it charges decently and even flashes a little blue blinking light when it’s not placed on properly so you know if it’s charging or not. i will say the speed at which is charges is average, so it’s not a super fast charger.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
T
Verified Purchase
TLC
Natrona Heights, US
★★★★★ 5
Awesome product will not disappoint
Size: 1pack, Color: Black
This is something like the 5th+ one of these Anker 313 Wireless Charger Stands that I’ve purchased. Why 5+? Because these are really great wireless charging devices. I have bought myself a few, bought them for my sons and even, bought my ex-husband one. I’ve yet to have one not work, they just keep on providing a great charging system and having the cell phone sitting up like it does in the charger is a bonus. While cell is charging, if a call or text comes in, you can see that without picking up your cell. Also, you can be charging your device while you’re using it since this charging device props up your cell. On a side note, I did have a problem just recently with my cell not charging while on the stand, *BUT I found out it was the *charging cable that I had purchased separately that was defective. I replaced the cable with a new one and the Anker 313 Wireless Charger (Stand) was immediately charging again. If you are thinking about buying this charger, I recommend that you do. You will not be disappointed in this charger…
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 22, 2026

recommand products