Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 9 - Jul 14
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
CURT 112143 - Class 1 Trailer Hitch 1-1/4in. Ball Mount Select Hyundai AccentConnect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle specific fit, manufactured with pride, finished for industry leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Hyundai Accent (see application info to verify fitment). The hitch integrates with the
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Hyundai Accent (see application info to verify fitment). The hitch integrates with the vehicle's frame and provides a useful and dependable 1-1/4" x 1-1/4" receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4" trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you're headed or which season of the year you’re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.
Specifications:
| Description_ABR | CL 1 |
| Description_ASC | Class 1 Trailer Hitch, 1-1/4" Ball Mount, Select Hyundai Accent |
| Description_ASM | CURT 112143 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Hyundai Accent |
| Description_DES | Class 1 Trailer Hitch, 1-1/4" Ball Mount, Select Hyundai Accent |
| Description_EXT | CURT 112143 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Hyundai Accent |
| Description_INV | Class 1 Trailer Hitch with Ball Mount |
| Description_KEY | 4 hidden hitchs box drawbar draw hauler bumper hole tite bar replacement adaptor cars 2000 2000lb 1.25 class-1 insert reciver oem auto coupler 1.25" one i max weld bolt 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 |
| Description_MKT | Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Hyundai Accent (see application info to verify fitment). The hitch integrates with the vehicle's frame and provides a useful and dependable 1-1/4" x 1-1/4" receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4" trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you're headed or which season of the year you’re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation. |
| Description_SHO | Class 1 Hitch |
| Description_SLA | Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Hyundai Accent (see application info to verify fitment). The hitch integrates with the vehicle's frame and provides a useful and dependable 1-1/4" x 1-1/4" receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4" trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you're headed or which season of the year you’re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation. |
| Description_ASC | Class 1 Trailer Hitch, 1-1/4" Ball Mount, Select Hyundai Accent |
| Description_ASC | Rated to 2,000 lbs. gross trailer weight and 200 lbs. tongue weight |
| Description_ASC | Engineered with a vehicle-specific design for a custom fit |
| Description_ASC | Concealed main body for OE look and seamless integration with the vehicle |
| Description_ASC | Tested for safety in accordance with SAE J684 |
| Description_ASC | Precisely welded for superior strength and fit |
| Description_ASC | Protected by a durable high-gloss black powder coat finish |
| Description_ASC | Co-cured in a rust-resistant liquid A-coat, inside and out |
| Description_ASC | Equipped with an open-back receiver for easy cleaning |
| Description_ASC | 1-1/4" x 1-1/4" ball mount features a 3/4" hole to accept a trailer ball shank |
| Description_ASC | Ball mount can be flipped to provide drop or rise for level towing |
| Description_ASC | Limited lifetime warranty (one-year finish, one-year parts) |
| Description_ASC | Made in USA (may include imported hardware) |
| Description_DEF | Trailer Hitch |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 918 reviews
Sort
Product Reviews
★★★★★ 5
Hands down, the BEST handheld frother I've ever used!
Color: Black
Hands down, the BEST handheld frother I've ever used! I got the black one, but any color will have the same results.
Over the past 12 years or so, I've used so many different handheld frothers and they've ALL fallen short of expectations for quality, longevity, power, features, and usability.
I've used everything from cheap, $15 models to $50+ models and everything in-between. Some with fancy attachments for various types of mixing, frothing, beating, whipping, etc. Some with rechargeable batteries, some without. Some AC powered, some with fixed whisks, some with detachable/replaceable whisks, some with stands, etc. NONE have been spectacular. Most broke within 6 months and got tossed. ALL were major disappointments in the end, including the "revered" Zulay models of which I tried several.
I finally found this Maestri House branded, variable speed frother with detachable / replaceable whisks and got one to try. I was literally on Cloud Nine the first time I turned it on. Like, WOW! Not only was it FAST on the highest speed, but it was powerful enough to churn right through milk, eggs, cream, etc, without bogging down like many others.
This thing makes milk froth like a milkshake and Matcha Lattes like nothing else I've ever experienced. I used to have to sift my Matcha, then whisk it in hot water, then froth milk and then blend them together to make the perfect latte. and if the milk was cold (my preference), pre-whisking in hot water was a must to avoid lumps. However, with THIS frother? I literally pour my milk into a tall tumbler, drop in un-sifted Matcha powder, and spin up the Maestri House frother at first on a medium low speed to get it mixed, then jump straight to the highest speed to really whip that milk and match up. After about 30-45 seconds, I've got the thickest, richest, smoothest, most aerated latte around. And NO LUMPS at all!!! What a time and dish saver!
And cleaning? I just run it under hot running water to get the shaft cleaned and then spin it up in a dish with hot running water for a few moments, then spin it on high for a few seconds in the air to dry it off instantly.
Now, I'll be honest here, too. The specs say it can go months on a charge, using it for a couple minutes a couple times daily. Well, I guess it could do that and still spin. But I use it FULL SPEED, churning hard for at least a minute a couple times per day. After about 2 weeks, I can start to notice a speed reduction so I just plug it back in on the charger. All things considered, this is still better than all the other handheld frothers I've used over the years.
After using the heck out of this thing for the past 7 months, I've even decided to start selling these in our Japanese gift shop. The manufacturer is has been very responsive both in customer support (I called them about an issue I thought I was having, and they called me back with a couple hours even though I didn't leave voicemail when they didn't answer right away) and in reseller support. I have to give these guys an A+ for responsiveness and quick resolution when problems might arise.
HIGHLY recommended!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 17, 2025
★★★★★ 5
Great Addition!
Color: Black
Why did you pick this product vs others?:
I just started a powdered drink routine recently and was having a difficult time mixing it with water. I would consistently end up with small nuggets of mix making it unenjoyable to drink. I knew I needed a mixer and was glad I found this device when I did. It works perfectly! I like the fact that it comes with its own stand and included two mixing heads. It is solid, well-designed, and you can feel the quality when you pick it up. The variable speed of the mixer is perfect for ensuring that everything is blended well. I haven’t used it to “froth” anything yet, at least not on purpose, but I accidentally found out that it can do that well. This is a great addition to our kitchen and is very easy to wash after use. So far…no issues. Highly recommend for those of you looking for the right tool to make sure those protein mixes aren’t full of unmixed nuggets.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 21, 2025
★★★★★ 4
Low foam
Color: Black
Love this frother. It is great quality and the turn speed is amazing. My only issue is this. It comes w 2 wands and they are both singles. The single is great for stirring things up. It does not make a lot of froth and for some things it’s perfect but sometimes I like a lot of froth and I wish it either came w a single and a double or you could purchase a double separately to intermix. I don’t want to buy a whole other unit just for the double. I wrote to them bc the double frother they sell doesn’t look as good as this one but sometimes a girl needs a lot of foam and sometimes th stirring is perfect.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 20, 2026
★★★★★ 5
Still The Best Frother Ever!
Color: Black
I love how it is easy to use, how it holds a charge, and how much power it has. I've only charged it once since I got it & I've been using it on a daily basis!!! Though it isn't a long time, I'm happy with it so far! I definitely will recommend it to anyone looking for a great frother. If you are looking for one, look no further! You won't be disappointed! I've read some comments where they found it to be too strong that their drink spilled everywhere. But for me I have not had any incident of spilling over. I have used it both for my coffee and my matcha tea and it worked great without any spilling over. You just have to start with the lowest power and ensure that you have a large enough container to have a room for your frothing. My sister tried to use it recently during her visit to make us matcha tea. However, she experienced spillage all over the cup, because she had used a small cup. Otherwise, she liked it very much and said she will get one when her battery operated one stops working...
Another thing I like about the product was the customer service that I had received. When I got my first order which came quickly, it wasn't working after having charged it over 24 hours. It was not turning on at all. I returned it and ordered a replacement which I received within a day or two. This time after charging it for the recommended amount of time, I was a bit skeptical when I turned it on. However, I was pleasantly surprised that it worked like it was supposed to and it has been working ever since having charged it only once so far. I may come back and give an update depending on how it does after 6 months of use, so keep in tune...
I don't know if there is a way to write a new entry as a follow up to the old entry, so I'm going to add my follow up comment over here.
May 23, 2025 - I love my frother more than I can say in words. It's functionality has not changed a bit from the time I have purchased it. It charge lasts several weeks to few months before I charge it again and the power is still the same. Recently I decided to buy another one for my office use. I like the white color and so tried it but that one wouldn't even turn on. And then I got a gray one to have a different color. That one was much weaker than the black one I own. Then I replaced it with another gray one within few days. I tried it and it was exactly the same as the one I already replaced. So then I decided to go with a black one again hoping that it would be the same as the one I have. The black one did much better than the gray ones in the strength or power of the frother. However, it is weaker than the one I already have been using since last August. While I am not very happy with the quality being inconsistent in all of the ones I have tried including the recent pictures of the black one, I have decided to keep the black one because it is relatively better than the gray ones I tried. What I don't understand is why there is inconsistency in the quality of the same product by the same maker. I am beginning to wonder if the black one I purchased in Augusta last year was anomaly of a quality and a good way. Maybe I lucked out on my older black frother, but I'm unsure if quality is going to get better if I were to order another one. I have a sister who is a pro in making coffee drinks and she was the reason I had ordered this frother to begin with. She uses a battery operated one at this time and I have been thinking about getting her one like mine. While I am still skeptical, I am going to give it a shot and order her one sometime soon. If it doesn't work, I guess we will return it back. But one thing that I am grateful is that I have been able to return every one of those that I have tried recently with no issues. I hope that I don't have to return my most recent purchase in black. I was not even able to review the new purchase because of the item being the same color which is crazy.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 8, 2024
★★★★★ 5
Outstanding Frother!
Color: Space Gray
Exceptional! This frother is in another league compared to the cheapo push button frothers. The motor is smooth, quiet and powerful. This has an intuitive thumb dial on top that operates smoothly with a wide range of smooth speed adjustment. It’s gentle enough to froth a little bit of milk for a macchiato and powerful enough to scramble 3 eggs. The head is removable for easy cleaning. It’s also rechargeable. I charged this the day I bought it on April first. I use it at least twice a day. It’s September 26th today and I have yet to recharge it and it’s not showing any signs of needing a charge. One minor quibble is that they give you 2 of the same frother heads. They are built so well, that I don’t imagine it ever wearing out. It would have been nice to get a whisk or something different. Not a deal breaker at all though.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 26, 2025
recommand products
Milwaukee Tool 48-66-1530 Griploc 3/8" Keyless Chuck for 3/8-Inch 24 Thread Spindle on Hammer Drills
71.86
Ridgid 30088 Ratcheting Plastic Pipe-Tubing Cutters
148.72
Project Mu 87-92 Toyota Supra B-FORCE Rear Brake Pads - PBR187
165.79
Lang Tools 101-07 7" Locking Pliers Prisma Jaws
49.49
Lund 05-17 Nissan Frontier (6ft. Bed) Genesis Elite Tri-Fold Tonneau Cover - Black - 95889
214.50