Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 7 - Jul 12
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Matek F405-VTOL Flight ControllerSpecifications MCU: STM32F405RGT6, 168MHz , 1MB Flash IMU: ICM42688 P Baro: SPL06 001 OSD: AT7456E Blackbox: MicroSD card slot 6x UARTs, 1x Softserial_Tx option(INAV) 12x PWM outputs 1x I2C 4x ADC (VBAT, Current, RSSI, Airspeed) 1x spare PINIO USB Beep Extender with Type C(USB2. 0) Built in inverter on UART2 RX for SBUS input Switchable Dual Camera Input FC Firmware ArduPilot: MatekF405 TE INAV: MATEKF405TE_SD (INAV 5. 0 or newer) PDB Input voltage
Specifications
- MCU: STM32F405RGT6, 168MHz , 1MB Flash
- IMU: ICM42688-P
- Baro: SPL06-001
- OSD: AT7456E
- Blackbox: MicroSD card slot
- 6x UARTs, 1x Softserial_Tx option(INAV)
- 12x PWM outputs
- 1x I2C
- 4x ADC (VBAT, Current, RSSI, Airspeed)
- 1x spare PINIO
- USB/Beep Extender with Type-C(USB2.0)
- Built in inverter on UART2-RX for SBUS input
- Switchable Dual Camera Input
FC Firmware
- ArduPilot: MatekF405-TE
- INAV: MATEKF405TE_SD (INAV 5.0 or newer)
PDB
- Input voltage range: 6.8~30V (2~6S LiPo)
- Sense resistor: 100A continuous, 220A peak
- 5x ESC power pads, total 100A continuous
- Support continuous load of up to 100A on ESC pad near the current sensor resistor
- Support continuous load of up to 30A & peak of 50A on each ESC pad of Quadcopter
- Battery Voltage divider 1K:20K (Scale 2100 in INAV, BATT_VOLT_MULT 21.0 in ArduPilot)
- Current Senor: 220A, 3.3V ADC (Scale 150 in INAV, 66.7 A/V in ArduPilot)
BEC 5V output
- Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
- Continuous current: 2 Amps
BEC 9V /12V output
- Designed for Video Transmitter, Camera, Gimbal ect.
- Continuous current: 2 Amps
- 12V option with Jumper pad
- for stable 9V/12V output, input voltage should > output voltage +1V
BEC Vx output
- Designed for Servos
- Voltage adjustable, 5V Default, 6V or 7.2V via jumper
- Continuous current: 8 Amps, 10A Peak
- for stable Vx output, input voltage should > Vx voltage +1V
BEC 3.3V output
- Designed for Baro / Compass module and external 3.3V peripherals
- Linear Regulator
- Continuous current: 200mA
Physical
- Mounting: 25 x 25mm-Φ2mm, 35 x 35mm- Φ4mm
- Dimensions: 45 x 42 x 15mm
- Weight: 25g w/ USB/buzzer adapter
Included
- 1x F405-VTOL
- 1x USB(Type-C)/Beep (Passive buzzer) Extender + 20cm JST-SH-6P to JST-SH-6P cable for USB extender.
- 1x 20cm JST-GH-4P to JST-GH-4P cable for I2C port
- 1x Rubycon ZLH 35V 470uF capacitor
- Dupont 2.54 pins (Board is shipped unsoldered)
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 332 reviews
Sort
Product Reviews
★★★★★ 4
My dog loves this toy but…
Color: Grey Bear - Large
This toy has many pros and cons, but it’s my dogs all time favorite toy so I have to give it 4 stars.
Pro:My German Shepard loves this toy, it has no squeaker and she hates squeakers, so she hasn’t tried to destroy it. It’s the perfect size for a large ball. She likes to throw her toys and this one has a pretty decent bounce to it so she can entertain herself.
Cons: the inside is hard rubber, she likes to throw her toys and it hurts when she hits you with it or drops it on your feet. Also a huge hazard to windows and anything breakable.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 12, 2025
★★★★★ 5
Pretty awesome chew toy
Color: Grey Bear - Large
This toy is great!! I have a doodle that shreds everything in sight, including durable toys, but this one stood up to the Teddy test! He easily ripped off the ear/feet bits, but the fabric casing hasn’t come off after a week of play, and I expect the rubber toy inside will be even harder to break.
This is a fairly heavy toy, so it makes a thunk when it drops and is probably not suitable for small dogs. It has a light squeak that is quiet and infrequent enough to not annoy me, and it’s pretty cute too!! it does get soaked in drool pretty fast (and takes forever to dry), but at this point i’m grateful it lasts long enough to get drooled on at all.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 30, 2025
★★★★★ 3
less than 24 hours :/
Color: Grey Bear - Large, Color: Grey Bear - Large
smaller than i expected but had a strong interior that i was pleasantly surprised with. my lil lady very much enjoyed it, however it lasted less than 24 hours before the poor toy was skinned alive :( she loves plushies and she’s obsessed w his skin after tearing him apart. it does have a solid rubber interior that is still good as a toy, however i was hoping its skin would stay on longer than a day :( overall decent toy, 3 stars for being destroyed so quickly. wouldn’t recommend for strong chewers
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 7, 2025
★★★★★ 5
Lasts long
Color: Panda Bear - Large
Perfect for super chewer dogs.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 14, 2026
★★★★★ 4
Dachshund said “did I hear indestructible‽ Hold my ball”
Color: Grey Bear - Large
My 15lb Dachshund took this toy as a personal challenge.
He heard me tell his human brother that it’s indestructible on the inside and said “hold my ball” promptly proceeding to schmurder the textile aspect of this adorable toy.
I’d say it took him a total of 23 1/2 minutes to get to the center of this tootsie pop. I’m not even mad tho bc he had no interest in actually ingesting the outer part, and is totally into the inner toy, which is, for him, literally indestructible. It’s solid rubber, has a wild and fun bounce to it on multiple surfaces.
Zodiac rates the squeak 10/10. It’s great especially for when I’m on a call or talking to someone in real life and can’t immediately throw said toy or pay complete attention to him.
In conclusion:
Your dog will probably love it, ((suggest to just keep an eye on them during the schmurder process and make sure you grab all the pieces that come off so none are swallowed))
Depending on your tolerance for squeaker pitch and frequency of squeak, it's a 4/10 in annoyance mostly bc it’s not a long drawn out squeak ((I can not tolerate those toys, they get “lost on top on my fridge” until I get up the courage to throw them out without him seeing)), it’s quick and requires a bit of effort to produce the sound however it’s a very high pitch squeak so it’s all up to your preference. I personally try to buy toys I can tolerate my dog loving on bc when he gets a new toy, it’s his favorite thing for a long time, like, it sleeps on the bed with us for the first month.
Hope your fur child loves this as much as mine did.
Not sure I’ll do the whole two in one toy thing again only he got through it so fast.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 25, 2025