Supra A80 (MK4) '93-'02 - Cup Holder Armrest, Carbon Fibre or Fiberglass

Supra A80 (MK4) '93-'02 - Cup Holder Armrest, Carbon Fibre or FiberglassPro Spec Imports Exclusive 'Modern Type' Carbon Fibre Cup Phone Holder Armrest for the A80 (Mk4) Supra 1993 2001 Features: Crafted from 100% pre preg dry carbon fibre, formed in a precision billet aluminium mould and autoclave cured under heat and pressure for exceptional strength, consistency, and a flawless finish, protected by a high gloss UV resistant clear coat for lasting shine Exclusive Pro Spec Imports design, inspired by modern vehicle

Pro Spec Imports Exclusive 'Modern Type' Carbon Fibre Cup / Phone Holder Armrest for the A80 (Mk4) Supra 1993 - 2001

Features:

• Crafted from 100% pre-preg “dry” carbon fibre, formed in a precision billet aluminium mould and autoclave-cured under heat and pressure for exceptional strength, consistency, and a flawless finish, protected by a high-gloss UV-resistant clear coat for lasting shine
• Exclusive Pro Spec Imports design, inspired by modern vehicle interiors such as the A90 Supra, featuring functional cup holders large enough to fit a 750ml Powerade bottle, plus a practical centre cut-out for cup handles and mobile phones
• Complete replacement for the OEM armrest lid, giving a lighter, premium upgrade that helps modernise the classic MK4 Supra interior

• Simple installation using pre-applied 3M automotive-grade tape (see instructions below). This unit does not hinge or open and is designed to remain fixed in place. For easy access underneath, it can alternatively be installed using strong Velcro, allowing quick removal and reinstallation when required.

What you get:

• 1pc A80 (Mk4) Supra Cup holder/armrest
• 1pc Pro Spec Imports sticker
• 1pc Pro Spec Imports keychain

This product fits the following:

• Suits Toyota Supra A90 (MK4) 1993 - 2001
• Choose Right Hand Drive (RHD) or Left Hand Drive (LHD) from the dropdown menu

Shipping Australia & New Zealand wide: 

• Sent Airmail Tracked - 3 to 15 working days. Tracked only, no signature on delivery = $24.95 AUD  
• Sent EMS Express - 2 to 10 working days. Tracked with signature on delivery = $39.95 AUD 

Shipping Worldwide: USA, UK, Europe, Japan, Canada, Asia & everywhere else! 

• Sent Airmail Tracked - 6 to 20 working days. Tracked only, no signature on delivery = $49.95 AUD 
• Sent EMS Express - 2 to 16 working days. Tracked with signature on delivery = $79.95 AUD

Installation Instructions:

What you need:

• Medium Phillips screwdriver

• Small flat-head screwdriver

• Long-nose pliers

Installation Guide

1. Remove the OEM leather armrest lid: Open the console lid and remove the five Phillips screws from the underside, then lift off the top cover.
2. Close the remaining portion of the lid, locate the two small metal hinge pins, and remove them with long-nose pliers. 
3. Locate the lid retaining arm and the small circlip that holds it in place. Using a small flathead screwdriver, remove the circlip to release the arm, then remove the remaining portion of the lid completely.
4. The remaining arm can be left inside the console beneath the new carbon armrest - this will be hidden and does not affect function. If desired, secure it with Blu Tack to prevent movement.
5. Prepare the mounting surface (IMPORTANT): Thoroughly clean all bonding areas using wax and grease remover or isopropyl alcohol to remove any residue.
6. Install the carbon armrest: Peel the backing from the pre-applied 3M tape (gently warm with a hair dryer in cold conditions), position carefully, then press firmly into place and hold for 30 seconds to ensure proper adhesion.
   

Alternative Installation (Velcro Option): For removable access, install using high-strength Velcro instead of the 3M tape. Apply Velcro strips to the mounting surfaces after cleaning, allowing the armrest to be quickly removed and reinstalled as needed.

**Only the Cup/Phone holder is included, no other parts shown in the photos are included.

Tips for caring for carbon: All of our carbon is cleared with a UV protectant clear coat. To keep your carbon looking beautiful long term it helps to wax with a UV protectant wax like Autoglym HD Wax (its also what McLaren recommend for protecting the carbon on their supercars), this will give it extra protection from the sun and help to keep it looking good for years to come.