5-Color Pack Atacs FG

5-Color Pack Atacs FGCamo PEN Information Pack contains 011 mud 012 tan 013 sand 015 coyote 022 rage CAMO PEN is made from the highest quality materials! The paint The paint is water based acrylic, fused with polyvinyl resin and acrylic water based varnish. It will cure to be waterproof and scratch resistant after 2436 hours. Paint cleanup in the first hour is easy with warm water and soap. After the paint cures it will need to be sanded off or removed with acrylic paint

Camo-PEN Information

Pack contains

• 011 mud
• 012 tan
• 013 sand
• 015 coyote
• 022 rage

CAMO-PEN is made from the highest quality materials!

The paint

• The paint is water-based acrylic, fused with polyvinyl resin and acrylic water-based varnish.
• It will cure to be waterproof and scratch resistant after 24–36 hours.
• Paint cleanup in the first hour is easy with warm water and soap.
• After the paint cures it will need to be sanded off or removed with acrylic paint remover.

The sponge

• The sponge tips are specifically crafted for our CAMO-PENs.
• The highest quality sponges are die-cut into 15 mm circles for excellent application.

Coverage

• Each CAMO-PEN contains 30 ml of paint and provides 1/2 m² of coverage on non-porous surfaces.
• It is possible to paint multiple items with one CAMO-PEN.

SAFETY

• While CAMO-PEN is made from water-based products and is not toxic to the environment, it should not be ingested and may cause allergic skin reactions in some people.
• If the paint comes into contact with your eyes, flush for 5–15 minutes with cool, clean water.

INSTRUCTIONS

• Prepare the surface you want to paint by sanding with fine sandpaper or a sanding sponge. We recommend 250 grit or higher.
• If the surface is already rough or porous, you may skip sanding.
• Clean the area with acetone for metal parts or warm soapy water for plastic. Allow it to dry completely before sanding.
• Shake the CAMO-PEN vigorously before each use!
• Unscrew the cap and remove the seal (we recommend keeping the seal if you plan to store the pen for longer than a month).
• Screw the cap back on and gently squeeze the pen; paint will be expelled through the hole in the sponge.
• Be careful not to squeeze the pen too hard!
• Paint the desired area by gently dabbing the sponge tip onto the surface.
• Avoid brushing back and forth, as this motion may separate the sponge from the nozzle.
• If the paint gets clogged, remove the entire top and clean with warm water or use a stir stick to dislodge any hardened paint.
• After the base coat is applied and is dry to the touch, take one color at a time and gently apply it with very soft dabbing motions to create a natural camo pattern using the holes in the sponge.
• Repeat with each color of your choice over the entire surface until the desired result is achieved.

CAMO-PEN offers quite a few advantages compared to traditional painting methods.

QUICK:

• With CAMO-PEN, it is possible to have a fully custom painted airsoft gun (rifle) in about 1 hour.
• Yes, you read that right! One hour and you can have a dry-to-the-touch, multi-coated, multicolor custom paint job!
• Smaller items can be done even faster! CAMO-PEN paint is dry to the touch in just a few minutes and, thanks to its pen-like design, custom work is as simple as drawing on your gear.

CLEAN:

• CAMO-PEN’s unique design means you won’t make a mess or have paint spilling everywhere.
• You can paint your airsoft gun anywhere without worrying about spray paint fumes or laying down large drop cloths.

EASY:

• No paint brushes, no spray cans, no hassle!
• Just pick up your CAMO-PEN and go!
• When you're done, simply put the cap back on and save the remaining paint for later.
• With our custom-designed stencils, you can create great patterns in minutes!

LOW COST:

• You can get a CAMO-PEN set or even a single color for a fraction of the cost of spray paints or custom shop paint jobs.
• You also won’t waste half the paint on your project like you do with spray paint!

TEXTURE:

• CAMO-PEN’s unique design allows you to apply a textured sponge finish.
• This results in an unparalleled grip surface on your gear and reduced light reflection thanks to the shadowing effect of the texture.
• Who wouldn’t want better grip on their airsoft gun, radio, or any other gear?

Important Info and more...
DRY TIME:

• Dry to the touch / second coat in about 5–10 minutes depending on temperature and humidity.
• The warmer and less humid it is, the faster it will dry.
• Waterproof and scratch resistant after 24–36 hours depending on temperature and humidity.

TOXICITY:

• CAMO-PEN uses non-toxic water-based paint.
• This means that most people, animals, and plants will not have an adverse reaction to contact.
• It is not safe for consumption and should be cleaned off the skin promptly if contact occurs.

WATER RESISTANCE:

• CAMO-PEN paint is waterproof once fully cured.
• After drying for about 24–36 hours, the painted item can be fully immersed in water with no adverse effects.
• It is NOT recommended to use this paint on items that will be in constant contact with water.
• Getting wet and drying off is not a problem, but prolonged water exposure can cause the paint to begin breaking down.

SCRATCH RESISTANT:

• CAMO-PEN paint is scratch resistant when fully cured (24–36 hours).
• When properly applied to a clean, prepared surface and allowed the correct curing time, the paint should not scratch off easily.
• In most cases, the paint will "scuff" rather than "scratch."
• If scuffing occurs, simply touch up the affected area and it will look as good as new!