SKU: 2908931199

Catalytic Converter for 2001-2003 Mercedes-Benz S500 Base 5.0L California Grade CARB Compliant Direct-Fit Catalytic Conv

$699.75 $777.50
Save 10%
No.2 Bestseller on communitymontessori.net >

Pay in installments of $194.38 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 18 - Jul 23

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Catalytic Converter for 2001-2003 Mercedes-Benz S500 Base 5.0L California Grade CARB Compliant Direct-Fit Catalytic ConvOverview: Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct Fit Catalytic Converter 454037. With features including free flowing mandrel bent tubing and highly corrosion resistant, stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state of the art metrology department uses the latest 3D scanning systems during research

Overview:

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 454037. With features including free-flowing mandrel-bent tubing and highly corrosion resistant, stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2001-2003 Mercedes-Benz S500 and interchanges with OE part 220 490 06 20. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to be certified by CARB for legal use in CA/CARB restricted states for the listed vehicles.

Interchange:

Brand  Interchange Part Number
Mercedes-Benz 220 490 06 20
Mercedes-Benz 2204900620
Mercedes-Benz 220 490 06 20
Mercedes-Benz 2204900620

Application:

Year Make Model Submodel Engine Size
2001 - 2002 Mercedes-Benz S500 5L/V8
2003 Mercedes-Benz S500 Base 5L/V8

Specs:

Air Tube Adaptable No
Sensor Port Count 2
Overall Length (In.) 57
Mounting Hardware Included Yes
Heat Shield Attached No
Main Piping Diameter 2.25
Type Direct-Fit
Oxygen Sensor Location Pre and Post Converter
Title California Direct-Fit
Subtitle California / CARB Compliant
Clamp Included Yes
Series California
Material Stainless Steel
Inlet Attachment Bolt-On
Hangers Included No
Outlet Attachment Bolt-On
Finish Stainless Steel
Converter Quantity 2
Substrate Material Ceramic
Gasket Included No
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 2908931199

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.3 ★★★★★
Based on 7 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
Troy Amhaz
West Palm Beach, US
★★★★★ 5
Must for subwoofers. True 2mm spec. High quality.
Model: 36 SqFt(3.4 SqM), Model: 36 SqFt(3.4 SqM)
Let me start of by saying WOW! This made a huge difference in the SQ of my L7S pushing 930w rms. Before I had major rattles in my 2020 Honda Civic SI. Taking the time to do this to my trunk and Lid made me realize just how loud my subwoofer actually is. It literally eliminated the rattles throughout my whole car. I still plan on doing this to my doors and rear deck but once I upgrade the speakers. I still have half of the box just doing the trunk and lid so 1 box of 36sf will be enough for most of the areas that need to get done. You may need a little more overall. This is true 2mm spec. Very sticky and easy to apply. It just take time to finish the work correctly and roll it down. It is not as heavy as I thought it was going to be. The size of the sheets are perfect for what you need to do. The value is on point for the quality. It does not rip very easily but you can cut it to size without any problems. Again, This is a must buy for anyone who is pushing 1000w rms or more.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 29, 2025
C
Verified Purchase
Craigdog
Natrona Heights, US
★★★★★ 5
Quality product you
Model: 18 SqFt(1.7 SqM), Model: 18 SqFt(1.7 SqM)
Summary: Great quality product, priced right. Cuts and installs easy-follow the instructions people!! PRO TIP-you don’t need to cover every square inch. OVERKILL!! Think about it-when a bell rings you could put your fingers on the edge and silence it right? Same rules apply here. A strip or square will isolate the vibration and notice when placed correctly— knock on the surface and see what vibrates or what part makes the loudest drowning and that’s a good clue of where you should put a piece of this…unless you’re trying to use it for temperature insulation no need to go ape on it. If you look at the bottom of a stainless steel sink, it’s got a stripe or a small sticker of insulation that keeps it from rattling. You can do that here. What’s important to note is the instruction specifically say use a roller to roll the ribs out until it’s smooth that way you’ve got maximum adhesion. I see a lot of pictures and videos from people that finished their install and didn’t follow this simple instruction. It makes sure that it’s stuck down before you put all your paneling and carpet back in and it’s a small step with a cheap wooden roller it’s easy. I’ll say the installation with this product is a breeze. You can use sharp scissors or a blade. It does get gummy after a while, and you may need to clean off your blade or your scissors, but it cuts very well and the ribs make it easy to size in space the thickness is fantastic and the backing paper comes off quite easily. I’ve done lots of installations with Graphics emblems you name it and this product is very easy to use and represents good value.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 30, 2026
S
Verified Purchase
Shopper
Lake Worth, US
★★★★★ 5
Good stuff !
Model: 36 SqFt(3.4 SqM), Model: 36 SqFt(3.4 SqM)
This is an excellent product. Easily moldable, cuttable with good scissors or razor knife, very sticky, works great. This pack was enough to do all 4 doors on a crew max truck, and I went wild on the fronts. I used 9 peices on each rear door which was just enough, and the rest on the fronts. I doubled up layers and even used some on the back of the door panels. If you follow the instructions and dont go wild you might even have extra left over. It works just like you would imagine. Without doing the entire cab there will still be road noise but this helped noise, better audio, no buzzing door panels, terrific improvement. It is kind of heavy, so extra weight is added to truck, but that really isnt a bad thing. It is noticable but in a good way. Get it. Use it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 20, 2026
O
Verified Purchase
Odin M Turner
Whiting, US
★★★★★ 4
Good product
Model: 36 SqFt(3.4 SqM)
Easy to roll out. Works great  Why did you pick this product vs others?: Fair price for the amount of coverage, good quality  Works well: Easy to install, rolls out great. Forms to contours well
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 13, 2025
B
Verified Purchase
BRIAN HEATH
West Palm Beach, US
★★★★★ 5
Great product
Model: 36 SqFt(3.4 SqM)
I used this on the doors of a Toyota Tacoma, worked as it described. Reduced the road noise significantly.. Need to buy another box for the floor and roof of the truck..
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 15, 2026

recommand products

Rear Lower Arm Bushing Honda Civic
128.58
Front Lower Control Arm Honda Civic
237.99
Rear Trailing Arm Bushing Honda CR-V
96.30
Hard Tie Rod Toyota 86
155.33
Front Control Arm Bushing Subaru Forester, Impreza
84.00