Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 10 - Jul 15
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Happymodel Mobula7 1S ELRS 75mm BNF Brushless Whoop (2.4Ghz)This drone features the all new 5in1 AIO board that includes 2. 4Ghz ExpressLRS V2. 0, OpenVTX (up to 400mW) along with 4x 12A BLheli_S ESC, and BetaFlight OSD all built into a F4 whoop flight controller board. The new RS0802 motors come with a new unibell design, and use a 1. 5mm shaft with a PCB bottom plate, high efficiency and much more reliable. &feature=emb_title Key Features X12 5 IN 1 AIO flight controller built in 2. 4G ELRS V3. 0 and Openvtx
This drone features the all new 5in1 AIO board that includes 2.4Ghz ExpressLRS V2.0, OpenVTX (up to 400mW) along with 4x 12A BLheli_S ESC, and BetaFlight OSD all built into a F4 whoop flight controller board.
The new RS0802 motors come with a new unibell design, and use a 1.5mm shaft with a PCB bottom plate, high efficiency and much more reliable.
&feature=emb_title
Key Features
- X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V3.0 and Openvtx
- VTX Power up to 400mw
- ELRS V3.0 Support
- NEW RS0802 KV20000 motors
- Runcam Nano3 The lightest 1/3 CMOS 800TVL Camera
- Smooth and powerful
- Compatible for 1S Lipo/LIHV
- Recommend 1S 450mah/550mah/650mah battery(Not include)
&feature=emb_title
Specification
- Brand Name: Happymodel
- Item Name: Mobula7 1S 75mm Micro FPV whoop drone
- Wheelbase: 75mm
- Size: 99mm*99mm*40mm
- Weight: 24g
| Motor | Mode: RS0802 KV20000 Configu-ration:9N12P Stator Diamter:8mm Stator Length:2mm Shaft Diameter:Φ1.5mm Motor Dimension(Dia.*Len):Φ10.5mm*13.5mm Weight(g):2.0g No.of Cells(Lipo):1S only |
| Propellers | Weight:0.24g Material:PC Pitch:1 inch Props Dia:40mm Center Thickness:5mm Center Hole Dia:1.5mm |
| Flight controller | X12 ELRS V1.0 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280 X12 Frsky V1.0 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FR X12 Flysky V1.0 flight controller built-in SPI Flysky 2.4G receiver Target: CRAZYBEEF4FS X12 PNP V1.0 flight controller without onboard receiver Target: CRAZYBEEF4DX MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU6000 or ICM20689(SPI connection) Mount hole size: 25.5mm*25.5mm Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 12A(each) Blheli_S 4in1 ESC Built-in Betaflight OSD(SPI Control) Built-in 5.8G OpenVTX 0mw~400mw Built-in ExpressLRS 2.4G,Frsky D8/D16,Flysky AFHDS 2A Built-in voltage detection Built-in current sensor |
| Onboard 4in1 ESC | Power supply: 1S LiPo/LiPo HV Current: 12A continuous peak 15A (3 seconds) Support BLHeliSuite programmable Factory firmware: Z_H_30_REV16_7.HEX Default protocol: DSHOT300 Support Bluejay firmware |
| Onboard SPI ExpressLRS 2.4GHz Receiver
( 2.4G ELRS Receiver Version) |
Packet Rate option: 50Hz/150Hz/250Hz/500Hz ExpressLRS Firmware version: V3.0 RF Frequency: 2.4GHz Antenna: SMD antenna Telemetry output Power: <12dBm Receiver protocol: SPI ExpressLRS Compatible with ExpressLRS V2.0 TX Module Couldn't flash separately ExpressLRS firmware |
| Onboard Frsky SPI D8/D16 receiver compatible
( Compatible Frsky Receiver Version) |
SPI BUS receiver Frsky D8 compatible Compatible Non-EU transmitter D8 model Channels: 8ch No ground interference ( Transmitter and receiver 1 m from the ground): 200meter Failsafe support |
| Onboard Flysky SPI receiver compatible
( Compatible Flysky Receiver Version) |
SPI BUS receiver Protocol: AFHDS and AFHDS-2A Switchable Channels: 8ch(AFHDS) or 14ch(AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 200meter Failsafe support |
| PNP Version (without onboard receiver) | Full UART1 for external Receiver Support CRSF/GHOST/SBUS/IBUS/DSMX protocol IR1 pad(invert RX1) used for SBUS input |
| Onboard 5.8g OPENVTX | Firmware version: OPENVTX Smart audio v2.1 PIT Mode support RCE Mode support Channels:48ch Transmitting Power: 0/RCE/25mw/100mw/400mw Power supply: DC 5V Current (5v): <650ma (400mw) |
| Runcam Nano3 | Model: RunCam Nano 3 Image Sensor: 1/3" CMOS Horizontal Resolution: 800TVL Lens : 2.1mm(M8) FOV 150° Signal System: NTSC S/N Ratio: >50dB Electronic Shutter Speed: Auto Auto Gain Control (AGC): Auto Min. Illumination: [email protected] D-WDR: Auto Day/Night: Color Power:DC 3-5.5V Current: 110mA@5V [email protected] Housing Material: ABS Net Weight: 1.2g Dimensions: L14mm*W14mm*H9mm |
| Recommend 1S Lipo Battery (Not included)
|
Capacity: 650mAh Voltage: 3.8v Continuous Discharge Rate: 30C Instantaneous discharge rate: 60C Size: 60mmx18mmx8mm Weight: 16g Connector: PH2.0 |
Included
- 1x Mobula7 1S FPV Racing Drone
- 1x Propeller disassemble Tool
- 1x Extra Canopy
- 1x Parallel charging board
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.9 ★★★★★
Based on 2444 reviews
Sort
Product Reviews
★★★★★ 5
4 Paws up! My dogs LOVE them
Flavor Name: Variety Packs, Size: 3 Pack, Set name: Large, Flavor Name: Variety Packs, Size: 3 Pack, Set name: Large
I have 2 large dogs who LOVE THESE.
A Great Pyrenees mix who’s a skinny 80lbs and a lab/terrier mix who’s a chunky 50lbs. They both love bones and can REALLY chew through them quickly so I’m really picky about what I buy them.
Here is what is important to me and how I rate and choose bones. These are my comments on this bone set specifically:
Do they break/splinter?
-They don’t splinter, I have seen smaller pieces that have broken off and when the bone gets down to the end (but this is normal with bones) at which point those pieces can be thrown away. I have never had an issue with them choking, being too small or hurting my dogs though and they are aggressive chewers so I could see this happening with some dogs and never happening with others. 4/5 stars for this.
Do they smell/leave stains on the carpet?
-Nope! No odor and they actually leave my dogs breath smelling better and their teeth cleaner! 5/5 stars
Does it upset my dog’s stomach? (My bigger guy can’t tolerate a LOT of things, he vomits often and also gets diarrhea if he eats the “wrong” thing so I have to be very cautious.)
-NOT at all! No upset tummies. This is always very, very important to me. Make sure you have lots of water nearby for your pups though, these will make them very thirsty. 5/5 stars
Do they hurt my dogs tongue, mouth or teeth?
-Nope, no issues with this. They’re able to gnaw into these aggressively without hurting themselves. 5/5 stars
Are they gone in 2 seconds?
-No! I’m always worried the “stuffed” bones will be left in the dust after the stuffing is all gone but my dogs will still keep chewing on these after the stuffing is gone. They still enjoy the bones and they last for quite some time, weeks at minimum. I can also stick some peanut butter or other treats back in the middle after they get the original stuffing all out of them to “reuse” them if it seems like they’re getting a little bored with them. 5/5 stars
Do my dogs ACTUALLY LIKE THEM?
-They love them. 5/5 stars
Price?
-Great and totally affordable. $20 for 3 of them.. so less than $7/bone. This is comparable to a bone from the pet store and these last a lot longer than something you would find there in the “fresh” grocery-store-like-section of the pet stores.
I’m an avid review reader, especially when it comes to items for my fur babies because I want the best for them. I truly love these bones and will keep buying them.
I will continue to buy these!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 26, 2019
★★★★★ 4
⭐️⭐️⭐️⭐️ Finally Found a Long-Lasting Bone That Actually Keeps My Dog Busy
Flavor Name: Variety Packs, Size: 3 Pack, Set name: Large
I’ve tried a lot of filled bones and chew treats over the years, and most fall into two categories: gone in 5 minutes, or upset stomach later. These filled beef shank bones hit the sweet spot.
The bone itself is thick, dense, and real, not a thin, brittle shell. My medium-large dog is an aggressive chewer, and this keeps him occupied for a solid 30–45 minutes working on the filling, then even longer gnawing on the bone afterward.
The filling smells fresh and appetizing (not rancid or overly greasy), and my dog goes crazy for it. We’ve tried the cheese-style and peanut butter–style fillings, and both were a big hit. No crumbly mess, no weird residue, and no digestive issues so far.
What I really appreciate is that these feel safer than many cheaper alternatives. The edges don’t splinter, and the bone wears down gradually instead of cracking.
Why I’ll keep buying these:
• Long-lasting even for power chewers
• Real beef shank bone, not pressed junk
• Filling dogs actually care about
• Helps with boredom and anxiety
• Good value compared to pet store brands
Minor cons:
• Can get a little smelly after heavy chewing
• I supervise and take it away when it gets small (as with any bone)
If you’re tired of wasting money on chews that disappear in minutes, these are a fantastic upgrade. My dog is obsessed, and I finally feel good about what I’m giving him.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 5, 2026
★★★★★ 5
Best bones out there
Flavor Name: Variety Packs, Size: 3 Pack, Set name: Large
These are the best bones I’ve ever bought. I have a lab puppy and as you can imagine most bones don’t last long around here, but this one keeps him entertained for days.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 4, 2026
★★★★★ 5
Happy doggy dancing my ensue
Flavor Name: Variety Packs, Size: 1.26 Pound (Pack of 1), Set name: Small
I haven’t tried them, but the dogs seem to like them. They do that tippy tappy happy dance when these come out.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 26, 2026
★★★★★ 3
Sturdy
Flavor Name: Variety Packs, Size: 3 Pack, Set name: Large, Flavor Name: Variety Packs, Size: 3 Pack, Set name: Large
Ok so I'm very happy that my standard poodle seemed to really enjoy this product. She was lacking and biting it for hours and days. That said she has still yet to make a dent in the bone. It seems to be too hard and too thick for her. I was surprised how heavy it was! It is large enough it is completely safe to leave her in the other room with. No strange odor or transfer of color. I'd say for the cost it isn't worth it as she is only getting filling and not able to eat the bone for some reason. Then again she is entertained for hours..so maybe so. Doesn't seem to bother her sensitive tummies either.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 7, 2026
recommand products
Halloween Social Video
500.00
Stainless Works 1992-96 Corvette C4 LT1/LT4 2-1/2in Exhaust System X-Pipe Chambered Turbo Mufflers - C49296EXH
973.27
Stainless Works 2009-13 C6 Corvette Axleback 2-1/2in Dual Chambered Turbo Mufflers Quad 4in Tips - C609CBQUAD
947.62
Social Media Day Social Video
500.00
Durga Ashtami Social Video
500.00