Matek Hall Effect Current Sensor 150A HCS-150A

Matek Hall Effect Current Sensor 150A HCS-150AAre you looking to buy a Matek Hall Effect Current Sensor in Australia? Matek has made a current sensor for vehicles that do not have a built in current sensor or for those who want to not have any voltage drop or heat build up like can occur with traditional resistor based measuring techniques. SPECIFICATIONS Hall effect current sensor No voltage drop and heat on current sensor components Offset and Sensitivity are calibrated in factory Continuous

Are you looking to buy a Matek Hall Effect Current Sensor in Australia?

Matek has made a current sensor for vehicles that do not have a built in current sensor or for those who want to not have any voltage drop or heat build up like can occur with traditional resistor based measuring techniques. 

SPECIFICATIONS

• Hall effect current sensor
• No voltage drop and heat on current sensor components
• Offset and Sensitivity are calibrated in factory
• Continuous current rating: 0~150A DC
• Sensitivity: 20mV/A,  INAV/BF scale = 200,  ArduPilot BATT_AMP_PERVLT = 50
• VBAT voltage sense: 0~69V,  INAV scale = 2100,  BF scale = 210, ArduPilot BATT_VOLT_MULT = 21.0
• Power Consumption: 17mA
• Voltage offset error at zero current : +-10mV
• Curr output voltage error: 5%
• Operating Temperatures: -30~80 °C
• 23 * 20* 23mm, 7g
• step file HCS-150A_step.zip

SOLDERING PADS:

• Vbat: for voltage sense, support 0~69V IN
• Volt: = 1/21 Vbat, 0~3.3V out
• Curr: Current signal, 0~3.3V out
• 5V: power supply for HCS-150A board, support 4~13V IN, 17mA
• G: GND
• TX/RX: for firmware update and configure (to be supported)

TIPS:

• mount Hall sensor far from iron and magnetic material

INCLUDES:

• 1 x Matek Hall Effect Current Sensor 150A

WIRING:

DIMENSIONS:

Browse more

• Browse all Matek
• Browse all FC Accessories