Victron VE.Can RJ45 Terminator - 2 Pack

Victron VE.Can RJ45 Terminator - 2 PackVictron VE. Can RJ45 Terminator (Bag of 2): Reliable CAN Bus Termination for Victron Energy Systems Precision Termination for VE. Can Networks The Victron VE. Can RJ45 Terminator is a purpose built component designed to ensure stable and error free communication across your Victron Energy ecosystem. Supplied in a convenient bag of two, these terminators provide the essential 120 Ohm, 0. 25 W, 5% resistor required at both ends of a CAN bus network,

Victron VE.Can RJ45 Terminator (Bag of 2): Reliable CAN-Bus Termination for Victron Energy Systems

Precision Termination for VE.Can Networks

The Victron VE.Can RJ45 Terminator is a purpose-built component designed to ensure stable and error-free communication across your Victron Energy ecosystem. Supplied in a convenient bag of two, these terminators provide the essential 120 Ohm, 0.25 W, 5% resistor required at both ends of a CAN-bus network, preventing signal reflections that can lead to data corruption and system instability. Whether you're integrating a Victron GX device, BMV battery monitor, or MPPT solar charger, proper termination is critical for maintaining the integrity of your VE.Can data link.

Why Proper CAN-Bus Termination Matters

In any CAN-bus network, including Victron's VE.Can protocol, the physical layer relies on a linear topology with exactly two termination points. Without correct termination, signal reflections occur at the cable ends, causing bit errors, increased error frames, and intermittent communication failures. These issues can manifest as missing data on your Color Control GX or Cerbo GX dashboard, delayed responses, or even complete network dropouts. By installing a Victron VE.Can RJ45 Terminator at each end of the bus, you eliminate these risks, ensuring robust data exchange between your Victron devices.

Engineered for Victron VE.Can Compatibility

This terminator is specifically designed for Victron's VE.Can ports, which use standard RJ45 connectors but carry CAN-bus signals rather than Ethernet. The internal 120 Ohm resistor is precisely matched to the characteristic impedance of the CAN-bus twisted-pair wiring, providing optimal signal termination. The compact, blue plastic housing with gold-plated contacts ensures a secure, corrosion-resistant connection, even in the demanding environments typical of marine, off-grid, and mobile installations.

Key Features

• Precision 120 Ohm, 0.25 W, 5% resistor for accurate CAN-bus termination
• RJ45 connector with gold-plated pins for reliable, low-resistance contact
• Robust blue plastic housing designed for durability in mobile and marine environments
• Supplied as a pair, providing both terminators required for a standard VE.Can network
• Plug-and-play installation—no tools or configuration needed
• Genuine Victron Energy part (ASS030700000) ensuring full compatibility and reliability

Applications Across Victron Energy Systems

The Victron VE.Can RJ45 Terminator is essential for any installation using VE.Can communication, including:

• Connecting multiple Victron MPPT solar charge controllers to a GX device for synchronised charging
• Linking a BMV-712 battery monitor to a Color Control GX for centralised monitoring
• Integrating Victron inverter/chargers with VE.Can interfaces into a larger system
• Setting up a VE.Can network in marine, RV, or off-grid solar installations

Without these terminators, your VE.Can network may suffer from intermittent faults that are difficult to diagnose. By using genuine Victron terminators, you ensure the network performs as designed, reducing troubleshooting time and preventing potential system downtime.

Simple Installation, Immediate Results

Installing the terminators is straightforward: simply insert one terminator into the unused VE.Can port at each end of your network. No software configuration is required. The physical termination immediately stabilises the bus, allowing your Victron devices to communicate reliably. For larger or more complex networks, always refer to the Victron VE.Can documentation to confirm the correct termination points.

Protect Your Victron Investment

Using non-genuine or incorrectly rated terminators can lead to impedance mismatches, potentially causing subtle communication errors that degrade system performance over time. The Victron VE.Can RJ45 Terminator is manufactured to Victron's exact specifications, giving you confidence that your system will operate reliably for years. With a bag of two, you have exactly what you need for a standard single-bus VE.Can network.

Order Your Victron VE.Can RJ45 Terminators Today

Ensure your Victron Energy system communicates flawlessly. Add the Victron VE.Can RJ45 Terminator (Bag of 2) to your order and eliminate the risk of CAN-bus errors. Whether you're commissioning a new installation or troubleshooting an existing network, these terminators are a small but vital component for reliable off-grid and mobile power management.