Pay in installments of $12.32 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 18 - Jul 23
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
LC1D18D7Main Range TeSys Product name TeSys D Product or component type Contactor Device short name LC1D Contactor application Resistive load Motor control Utilisation category AC 1 AC 4 AC 3 Poles description 3P Power pole contact composition 3 NO [Ue] rated operational voltage Power circuit: <= 690 V AC 25 400 Hz Power circuit: <= 300 V DC [Ie] rated operational current 18 A (at <60 C) at <= 440 V AC AC 3 for power circuit 32 A (at <60 C) at <= 440 V AC AC
Main
| Range | TeSys |
| Product name | TeSys D |
| Product or component type | Contactor |
| Device short name | LC1D |
| Contactor application | Resistive load Motor control |
| Utilisation category | AC-1 AC-4 AC-3 |
| Poles description | 3P |
| Power pole contact composition | 3 NO |
| [Ue] rated operational voltage | Power circuit: <= 690 V AC 25...400 Hz Power circuit: <= 300 V DC |
| [Ie] rated operational current | 18 A (at <60 °C) at <= 440 V AC AC-3 for power circuit 32 A (at <60 °C) at <= 440 V AC AC-1 for power circuit |
| Motor power kW | 4 kW at 220...230 V AC 50/60 Hz (AC-3) 7.5 kW at 380...400 V AC 50/60 Hz (AC-3) 9 kW at 415...440 V AC 50/60 Hz (AC-3) 10 kW at 500 V AC 50/60 Hz (AC-3) 10 kW at 660...690 V AC 50/60 Hz (AC-3) 4 kW at 400 V AC 50/60 Hz (AC-4) |
| Motor power HP (UL / CSA) | 1 hp at 115 V AC 50/60 Hz for 1 phase motors 3 hp at 230/240 V AC 50/60 Hz for 1 phase motors 5 hp at 200/208 V AC 50/60 Hz for 3 phases motors 5 hp at 230/240 V AC 50/60 Hz for 3 phases motors 10 hp at 460/480 V AC 50/60 Hz for 3 phases motors 15 hp at 575/600 V AC 50/60 Hz for 3 phases motors |
| Control circuit type | AC at 50/60 Hz |
| [Uc] control circuit voltage | 42 V AC 50/60 Hz |
| Auxiliary contact composition | 1 NO + 1 NC |
| [Uimp] rated impulse withstand voltage | 6 kV conforming to IEC 60947 |
| Overvoltage category | III |
| [Ith] conventional free air thermal current | 10 A (at 60 °C) for signalling circuit 32 A (at 60 °C) for power circuit |
| Irms rated making capacity | 140 A AC for signalling circuit conforming to IEC 60947-5-1 250 A DC for signalling circuit conforming to IEC 60947-5-1 300 A at 440 V for power circuit conforming to IEC 60947 |
| Rated breaking capacity | 300 A at 440 V for power circuit conforming to IEC 60947 |
| [Icw] rated short-time withstand current | 145 A 40 °C - 10 s for power circuit 240 A 40 °C - 1 s for power circuit 40 A 40 °C - 10 min for power circuit 84 A 40 °C - 1 min for power circuit 100 A - 1 s for signalling circuit 120 A - 500 ms for signalling circuit 140 A - 100 ms for signalling circuit |
| Associated fuse rating | 10 A gG for signalling circuit conforming to IEC 60947-5-1 50 A gG at <= 690 V coordination type 1 for power circuit 35 A gG at <= 690 V coordination type 2 for power circuit |
| Average impedance | 2.5 mOhm - Ith 32 A 50 Hz for power circuit |
| [Ui] rated insulation voltage | Power circuit: 690 V conforming to IEC 60947-4-1 Power circuit: 600 V CSA certified Power circuit: 600 V UL certified Signalling circuit: 690 V conforming to IEC 60947-1 Signalling circuit: 600 V CSA certified Signalling circuit: 600 V UL certified |
| Electrical durability | 1.65 Mcycles 18 A AC-3 at Ue <= 440 V 1 Mcycles 32 A AC-1 at Ue <= 440 V |
| Power dissipation per pole | 2.5 W AC-1 0.8 W AC-3 |
| Safety cover | With |
| Mounting support | Plate Rail |
| Standards | CSA C22.2 No 14 EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508 |
| Product certifications | CCC BV CSA GL RINA LROS (Lloyds register of shipping) GOST DNV UL |
| Connections - terminals | Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable end Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable end Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable end Control circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²solid without cable end Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²solid without cable end Power circuit: screw clamp terminals 1 cable(s) 1.5…6 mm²flexible without cable end Power circuit: screw clamp terminals 2 cable(s) 1.5…6 mm²flexible without cable end Power circuit: screw clamp terminals 1 cable(s) 1…6 mm²flexible with cable end Power circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible with cable end Power circuit: screw clamp terminals 1 cable(s) 1.5…6 mm²solid without cable end Power circuit: screw clamp terminals 2 cable(s) 1.5…6 mm²solid without cable end |
| Tightening torque | Power circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat √ò 6 mm Power circuit: 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2 Control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat √ò 6 mm Control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2 |
| Operating time | 12...22 ms closing 4...19 ms opening |
| Safety reliability level | B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 |
| Mechanical durability | 15 Mcycles |
| Maximum operating rate | 3600 cyc/h 60 °C |
Complementary
| Coil technology | Without built-in suppressor module |
| Control circuit voltage limits | Drop-out: 0.3...0.6 Uc AC 50/60 Hz (at 60 °C) Operational: 0.8...1.1 Uc AC 50 Hz (at 60 °C) Operational: 0.85...1.1 Uc AC 60 Hz (at 60 °C) |
| Inrush power in VA | 70 VA 60 Hz cos phi 0.75 (at 20 °C) 70 VA 50 Hz cos phi 0.75 (at 20 °C) |
| Hold-in power consumption in VA | 7.5 VA 60 Hz cos phi 0.3 (at 20 °C) 7 VA 50 Hz cos phi 0.3 (at 20 °C) |
| Heat dissipation | 2…3 W at 50/60 Hz |
| Auxiliary contacts type | Type mechanically linked 1 NO + 1 NC conforming to IEC 60947-5-1 Type mirror contact 1 NC conforming to IEC 60947-4-1 |
| Signalling circuit frequency | 25...400 Hz |
| Minimum switching current | 5 mA for signalling circuit |
| Minimum switching voltage | 17 V for signalling circuit |
| Non-overlap time | 1.5 ms on de-energisation between NC and NO contact 1.5 ms on energisation between NC and NO contact |
| Insulation resistance | > 10 MOhm for signalling circuit |
Environment
| IP degree of protection | IP20 front face conforming to IEC 60529 |
| Protective treatment | TH conforming to IEC 60068-2-30 |
| Pollution degree | 3 |
| Ambient air temperature for operation | -5…60 °C |
| Ambient air temperature for storage | -60…80 °C |
| Permissible ambient air temperature around the device | -40…70 °C at Uc |
| Operating altitude | 3000 m without |
| Fire resistance | 850 °C conforming to IEC 60695-2-1 |
| Flame retardance | V1 conforming to UL 94 |
| Mechanical robustness | Vibrations contactor open: 2 Gn, 5...300 Hz Vibrations contactor closed: 4 Gn, 5...300 Hz Shocks contactor open: 10 Gn for 11 ms Shocks contactor closed: 15 Gn for 11 ms |
| Height | 77 mm |
| Width | 45 mm |
| Depth | 86 mm |
| Net weight | 0.33 kg |
Offer Sustainability
| Sustainable offer status | Green Premium product |
| REACh Regulation | REACh Declaration |
| REACh free of SVHC | Yes |
| EU RoHS Directive | Under investigation |
| Toxic heavy metal free | Yes |
| Mercury free | Yes |
| RoHS exemption information | Yes |
| China RoHS Regulation | China RoHS declaration |
| Environmental Disclosure | Product Environmental Profile |
| Circularity Profile | End of Life Information |
| WEEE | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins |
Contractual warranty
| Warranty | 18 months |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 11 reviews
Sort
Product Reviews
★★★★★ 5
Ordered in spring/summer and it arrived separated too BUT...
Style: Restorative Protective Cream-1.3 Fl Oz
Ok, So I heard great things about this cream and decided to order. I ordered on May 28th and I live on the Gulf Coast of Texas and it is in the low 90s right now. I was worried mine would arrived separated like many others claimed to have gotten theirs, and sadly it did. Warm weather or not, blue water shot out of the tube the minute I squeezed it. Luckily, I read Mia P's review and submerged my tube in warm water (hot water actually straight out of my instant hot water faucet). I left it for about 5 minutes then shook it vigoroously. It seemed to help but was still a bit wonky so I repeated the process again and success! My tube is totally fine now and comes out in a thick, rich, emollient cream as it is supposed to. I will update my review after I use it more but so far I love the way it feels on the skin. It is very thick but spreads nicely and completely absorbs into the skin and leaves no greasy residue which is a big deal because I have oily skin. I purchased this to help with my Retin A uglies (I actually am using Musely with .05% tretinoin) and am hoping it helps with the redness and peeling I am having. I will update my review once I've used it for a while but wanted to post this review as I saw so many people complaining about the separating and just thought I'd mention that you can fix this issue if you have it (and there is a good likely hood that you will).
Update: I've been using this for a week now and I am absolutely in love with this cream! It is the most hydrating and healing cream I've ever used. Usually, thicker face creams like this would cause issues for me with acne or clogged pores as I do have oily skin that can break out if I use products with occlusive ingredients, but this one does not. In fact, my skin has never looked better! This is a must-have if you are using Retin-A/Tretinoin and going through the red/peely phase with your skin. The separation that occurred when I first received it has not been a problem and the cream is staying thick and free from any strange liquidy issues after I put it in hot water as mentioned in the first part of my review.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 28, 2023
★★★★★ 5
Saved My Skin and Healed My Eczema
Style: Restorative Protective Cream-1.3 Fl Oz, Style: Restorative Protective Cream-1.3 Fl Oz
I was having the worst skin winter of my life. I am hypersensitive and my skin started rejecting an expensive line I had used for many years (EL). My skin wasn’t healing even just using AQ balm on it and occasionally steroids when it was extra bad, and the pronounced eczema on my eyelids and neck for months was making me miserable and gross looking. I started researching brands I hadn’t tried for super sensitive skin and saw recommendations for Avene. We were leaving on a vacation and I was desperate to feel better so I ordered this and the matching serum. I started with only this cream and overnight I saw my skin start to heal. Within a few days it was like the last few months never happened. I carefully added the serum and had no issues. I used only these two products for the month I was gone and had glowing skin the whole time. This is thicker than a normal lotion since it is made to protect your skin but if you let it warm up a few seconds it smoothes easily. This will definitely remain a staple in my skin arsenal and I can’t thank you enough for making an actually gentle but effective product! This picture is two weeks after starting the product, smooth skin and confident to take selfies!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 3, 2026
★★★★★ 5
Don’t let the bad reviews deter you from saving your skin
Style: Restorative Protective Cream-3.3 Fl Oz, Style: Restorative Protective Cream-3.3 Fl Oz
I avoided purchasing this product for a while due to the bad reviews. However, it is still highly recommended by several dermatologist for skin barrier repair. Upon doing my own research, the product can separate if it is stored in cold temperatures (41 degrees or less). This can be fixed people!! It literally says it on the bottle/box and there’s even a video that Amazon posted saying this can happen. It does not affect the product. It’s just the thermal spring water and some oil separating but it can be reincorporated.
So I took the risk and ordered this. I’m a first time purchaser. It was already at my door when I was leaving for the gym at 5:30am so I let the package sit in my car for about 1.5 hours (temp was about 70s). I put the tube in a glass of hot sink water for 10 minutes when I got home. I rolled the tube in my hands for a few minutes to mix everything together. Guess what. It came out like a CREAM. No liquid shot out at me. If you can read, do a little research, and can follow instructions, you can get a working product.
I have sensitive skin. It’s been a struggle healing my skin barrier but it was getting better. I decided to do something dumb and try dermaplaning. My cheeks have been very red and irritated since. I did avoid active products for a few days after dermaplaning but it was still irritated. Just with the first time use of this product, it was nearly instant relief of some of the redness. It’s fragrance less which is great. It is currently on sale so I think the value is good for what it is right now. I only used two pea-sized amount for my whole face so I think it will last awhile.
This can significantly help your skin barrier! Do your own research and read the instructions!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
★★★★★ 3
Samples great, purchased product not
Style: Restorative Protective Cream-1.3 Fl Oz
My dermatologist recommended this cream after a laser procedure, and gave me some samples to take home. I found the thick, smooth cream calming and protective for my irritated skin. The zinc oxide leaves a whitish cast at first, which does tend to fade after it sinks in, but it could be problem if you have darker skin. Not an issue for me since I’m pale.
Because I liked the samples, I ordered two full-size tubes. Both arrived with the product inside completely separated. The texture was nothing like the samples. I opened the first tube and clear, watery liquid spilled everywhere. I quickly recapped it, shook and squeezed the tube as much as possible to try to re-emulsify the product, and it remained stubbornly separated, with chunky white paste suspended in thin liquid. I’ve thoroughly shaken the second tube and continue to hear the sloshing of thin liquid. So apparently once the cream has separated, it will not re-mix.
I don’t know what caused the unacceptable condition of the product—manufacturing variation, storage conditions prior to shipping, or conditions during shipment. Whatever it was, I would not buy this product in this way again. The samples were a five star product. The full size product I received was zero stars.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 15, 2026
★★★★★ 4
Helped calm my damaged skin barrier, but expect stinging on very raw skin
Style: Restorative Protective Cream-1.3 Fl Oz
I bought this because I severely damaged my skin barrier and needed something gentle that would help my skin calm down and heal. My skin was extremely sensitive, raw, irritated, tight, and honestly uncomfortable even with water touching it.
This did help, but I do want to mention that if your skin is VERY damaged or raw, there can be some stinging at first. I experienced that myself during the first few applications. The stinging didn’t last long for me, but I think it’s important to mention because people with damaged barriers are usually desperate for relief and can panic when products sting.
What ended up helping me most was using this as part of a simple barrier repair routine instead of using it alone.
What I personally did:
* Wet my face first with either water or Avène Thermal Spring Water so my skin was damp but not soaking wet
* Applied the Avène Cicalfate onto the damp skin
* At night, I sealed everything in with CeraVe Healing Ointment (Aquaphor would probably work too)
I repeated this every night before bed and sometimes during the day if I was staying home.
If I was leaving the house during the day, I would do the same steps but use sunscreen instead of sealing with ointment. I honestly think sunscreen is extremely important when your skin barrier is damaged and trying to heal because irritated skin feels even more sensitive when exposed to sunlight.
I used this day and night, very easy to use, and didn’t experience breakouts from it. The texture is thick but comforting once applied, especially when your skin feels dry and stripped.
Overall, I would buy this again. I don’t think it’s some overnight miracle product, but it genuinely helped my skin calm down and recover when my barrier was damaged. I personally didn’t notice any strong fragrance, which I appreciated since my skin was already extremely irritated. I also like how versatile this product is. Even though I originally bought it for barrier damage, I can see why people use it for irritation from retinol, over-exfoliating, dry patches, or skin that just feels compromised in general.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 14, 2026