Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 11 - Jul 16
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
TS-1 Turbocharger 6262 T3 0.82AR Externally WastegatedTS 1 Turbocharger 6262 T3 0. 82AR Externally Wastegated Upgrade your turbo setup with the TS 1 Turbocharger 6262 T3 0. 82AR Externally Wastegated, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication Universal Product. Smaller, Lighter and Faster Turbosmart's turbocharger series has been developed to leverage
TS-1 Turbocharger 6262 T3 0.82AR Externally Wastegated
Upgrade your turbo setup with the TS-1 Turbocharger 6262 T3 0.82AR Externally Wastegated, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication // Universal Product.
Smaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike. Every Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included. The TS-1 series are oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for. The ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained. All Turbosmart turbochargers have been designed with an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - while being smaller, lighter and faster in response than other solutions on the market. Available In TS-1 oil cooled turbochargers TS-2 oil and water cooled turbochargers V-Band, various T3 Flange and T4 Flange options Reverse rotation (Selected Sizes) Various AR?s options Internal and external wastegated options available Features Unparalleled transient response Aggressive aerodynamics with 7+7 2618 Aluminium splitter wheels Lightweight 310s stainless steel investment cast turbine housings Lightweight, Aluminium compressor covers CFD driven designed housings for optimal ARs and flow 713C Inconel turbine wheel for extreme EGTs VSR speed balanced Proprietary dual ceramic bearing system Integrated Iron backplate on center housing Specifications Compressor Inlet: 4" / 101.6mm Compressor Inducer: 62mm Turbine Inlet: T3 Flange Turbine Exducer: 62mm Turbine AR: 0.82 Turbine Outlet: V-Band (3.00") Weight: 6.06kg / 13.3lbs Horsepower Rating: 760-880HPImportant Notes
Fitment Requires Fabrication // Universal Product
Why Buy from Torque Lab?
Torque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.2 ★★★★★
Based on 740 reviews
Sort
Product Reviews
★★★★★ 1
waste of money
Color: Black, Size: 4 Panel-136‘’W-Round Pad
This is a total waste of money. Its only going to free stand if you arent moving it. If you are planning on dividing a room, and then folding these for space and then dividing the room again, itll last a few days. The poles kept coming off of the screws that holds the fabric on the poles together. Was fixing this EVERY DAY. Finally got tired of doing this and just threw it out. Lot of money spent on garbage. Get a sheet room divider, or something that isnt cheaply made. Was simply making an office type space in a bedroom, to seperate the two areas for work, and folding it kept making the poles come off those twisted screws. just not worth it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 3, 2026
★★★★★ 5
Absolutely love this room divider!
Color: Beige, Size: 3 Panel-102‘’-Round Pad, Color: Beige, Size: 3 Panel-102‘’-Round Pad
When they say you can't see anything through it, they are correct. As you can see by the video, the cars are traveling by with the sunlight on the divider and you still can't see any cars passing nor can you see the ones in the parking lot. You can also tell it blocks out the sunlight too which is a definite plus for our store. Quality material on the divider. Material is nice and snug on the poles with no ripples. I also like the base of these, they make the divider nice and sturdy and can be adjusted if floor is uneven. Also the design of the legs allow them to go under your furniture. Also putting them together is pretty easy. Just make sure you when you are putting the poles together to make sure at the top of the pole that the indent screw hole faces out. This makes for a better look. The directions don't say which way to turn and at 1st, I had one, one way and the other was another way as both ways work that way but I wanted a uniform/better look.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 29, 2024
★★★★★ 4
Works well, need power tool to assemble
Color: Beige, Size: 3 Panel-102‘’-Round Pad, Color: Beige, Size: 3 Panel-102‘’-Round Pad
Sturdy enough, especially when feet are positioned for balance. Works perfectly to create a WFH “cubicle”. Can adjust the size to provide complete privacy or fold back a panel when I want more openness. The fabric panels are not perfectly taught, but pretty close. The only negative is that without my husband’s power drill/screwdriver we wouldn’t have been able to put it together. It would take the strength of Thor to do it with just a manual screwdriver.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 30, 2022
★★★★★ 5
Now I don't have to see the "black hole" that used to be my family room!
Color: Black, Size: 4 Panel-136‘’W-Round Pad
I have an adult child living at home and his bedroom is tiny, so he's pretty much taken over the family room. We are both much happier now that the divider is up. It is about 12 feet long and gives him privacy to watch his movies and play his video games. And I don't have to see all the shoot-em-up stuff he likes to watch. I put the divider together with just a screwdriver (not a power one, that would be nice but I don't have so I had to use a little elbow grease.) It took a couple hours. The instructions are straightforward. I did have to use my long dining room table to attach the feet to the divider panels, which was a bit tricky. But I'm really pleased with the end result. I'm NOT a handywoman, so I feel proud that I did it "all by myself." He wanted the black fabric, but I think the lighter colors would have been better for a room that gets hot in the summer. Just my opinion. Whatever color you choose, I think you'll like the end result.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 18, 2023
★★★★★ 3
Busted spring on one side....
Color: Black, Size: 28-70"W x 48-120"H (Pack of 1), Color: Black, Size: 28-70"W x 48-120"H (Pack of 1)
I would have given it five stars except for the fact that 1) the instructions that come with it are miserable so you will definitely want to refer to the photos they have in the advertisement here, and 2) it appears that one of the vertical poles has a busted spring and I literally had to stuff some socks underneath it to make it hold. Definitely an eyesore, so I'm not thrilled about that.
With that being said, I'm in an apartment and I don't want to drill in the walls to hang a curtain rod. My sliding glass doors have a track that I was able to get brackets that fit over the track to hold a pole, but I had one window that I could not do that with. I thought this would be an interesting way to hang curtains without doing damage. I considered those sticky tape curtain rod holders, but I was reading a lot of bad reviews about them not holding or them taking the paint off upon removal. I figured this was the better option and it gave the room some nice aesthetics because my furniture is farmhouse white wood with black iron accents, so this blended really well with the aesthetics of the room. I know that most people who did reviews used this product as its advertised to be a room divider for privacy... So I figured this is a nice way to review using this product in a different way. I just really can't stand window blinds, as they look so commercial and industrial to me... I needed a way to make the space seem more homey.
While this is working fine for me, the reality is I have white lace curtains, which don't weigh much. I don't know that I could recommend this product, even though it says it can support a bit of weight, with curtains that are too heavy. Some of that, in part, is due to the fact that one of my springs is broken so it's not very stable as it is. However, even if I was not having the issue with the spring being busted on one side, I still don't think this would be good with heavy curtains (especially if you like opening your curtains frequently).
It did come with curtain hooks if you have the kind of curtains that allow you to use hooks to hang them. I do not. My curtains just slide onto the pole. If they were the type that could be put up with hooks then opening and closing them would probably be easier and maybe not as big of a deal as it is for me with the type of curtains I have.
I cannot comment on longevity as I just installed it today... If anything changes I will try to remember to come back and modify this review.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 6, 2025