Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 12 - Jul 17
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Sawn Reg C24 Structural Timber 47mm x 150mmC24 sawn regularised structural timber at 47mm x 150mm (6x2) is a kiln dried softwood graded for load bearing applications including floor joists, roof rafters and structural framing. Kiln dried to 20% moisture content or below for improved stability and consistent site performance. Specifications Property Detail Material Softwood Grade C24 structural Finish Sawn regularised, eased edges Nominal Size 47mm x 150mm (6x2) Lengths 3. 0m, 3. 6m, 4. 2m, 4.
C24 sawn regularised structural timber at 47mm x 150mm (6x2) is a kiln-dried softwood graded for load-bearing applications including floor joists, roof rafters and structural framing. Kiln dried to 20% moisture content or below for improved stability and consistent site performance.
Specifications
| Property | Detail |
|---|---|
| Material | Softwood |
| Grade | C24 structural |
| Finish | Sawn regularised, eased edges |
| Nominal Size | 47mm x 150mm (6x2) |
| Lengths | 3.0m, 3.6m, 4.2m, 4.8m |
| Moisture Content | Kiln dried to 20% or below |
What it's used for
- Floor joists spanning medium to long distances in domestic and commercial builds
- Roof rafters and ridge members where C16 does not meet span or load requirements
- Load-bearing studwork partitions and structural wall framing
- Decking subframes and ground-level support structures requiring a stronger section
Fitting and handling
Store timber flat and off the ground under cover before use, allowing it to acclimatise to site conditions for at least 48 hours where possible. Fix using appropriate structural joist hangers, framing anchors or direct nailing at centres specified by your engineer or building control officer. Where the timber will be in contact with masonry, concrete or exposed to moisture, apply a preservative end-treatment to cut sections on site.
FAQ
What is the difference between C16 and C24 structural timber?
C24 is a higher strength grade than C16, with stricter limits on knot size and slope of grain. It is specified where longer spans, heavier loads or tighter joist centres mean C16 does not provide adequate structural capacity. Your engineer or building control officer will confirm which grade is required for your project.
What does regularised mean on sawn timber?
Regularised timber has been machined to a consistent cross-section after sawing, so each length is the same depth and width. This makes it easier to achieve flat, level surfaces when installing floor joists or rafters without having to pack individual members. Edges are also eased slightly to remove sharp arrises.
Is this timber suitable for use as decking joists or a subframe?
Yes, the 47mm x 150mm C24 section is widely used for decking subframes where a stiff, strong bearer is needed. If the joists will be in ground contact or close to it, you should use a preservative-treated grade. If you need treated structural timber, contact Nottage Timber Merchants directly to discuss availability.
Browse the full range of C24 graded timber at Nottage Timber Merchants. We supply builders, contractors and self-builders across Bridgend and South Wales, with next-day delivery available to many local postcodes. Call us direct for bulk pricing on larger orders.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy