SKU: 13219572391

BetaFPV F4 1S 12A AIO Brushless Flight Controller (Built in RX)

Sale price$30.60 Regular price$34.00
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 10 - Jul 15

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

BetaFPV F4 1S 12A AIO Brushless Flight Controller (Built in RX)Are you looking to buy a BetaFPV F4 1S 12A AIO Brushless Flight Controller in Australia? F4 1S 12A AIO Flight Controller A 1S 12A FC for building lightweight 3" toothpick drones like HX115 SE Toothpick Drone. If you want to try a bigger FPV drone than 65mm 75mm on 1S power, and still want smooth and powerful flying actions, this FC that integrates 1S 12A ESC is definitely your best choice. F4 1S 12A AIO Flight Controller is the best choice for

Are you looking to buy a BetaFPV F4 1S 12A AIO Brushless Flight Controller in Australia?

F4 1S 12A AIO Flight Controller - A 1S 12A FC for building lightweight 3" toothpick drones like HX115 SE Toothpick Drone. If you want to try a bigger FPV drone than 65mm/75mm on 1S power, and still want smooth and powerful flying actions, this FC that integrates 1S 12A ESC is definitely your best choice.

  • F4 1S 12A AIO Flight Controller is the best choice for building ultra-lightweight 3" toothpick drones like HX115 SE FPV Quad.
  • Most of 1S flight controllers on the market come with 5A ESC by now, but this FC especially integrates 1S 12A ESC, it can provide more sufficient power for 3" toothpick drones.
  • Built-in current meter, 2 programmable RGB LEDs, and SPI Frsky receiver. At the same time, all the pads are left for the external receivers with UART1 and UART2, for buzzers, etc.
  • Whoop mounting hole pattern, be compatible with most 1S 3" frame. Large pads are reserved for solder motor cables, this design will make solder easier.

Specification of FC

  • Item: F4 1S 12A AIO FC (Frsky)
  • Weight: 4.74 g (without power cable and BT2.0 connector)
  • CPU: STM32F411CEU6 (100MHZ )
  • Six-Axis: MPU6000 (SPI connection)
  • Firmware version: betaflight_4.2.0_STM32F411
  • OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
  • Receiver: Intergrated SPI Frsky Receiver / Futaba Receiver
  • Motor Pin Connecter: 1.25mm Header Pins
  • Mounting Hole Size: 29mm x 29mm (suitable for whoop pattern mounting hole)
  • USB Port: Type-C

Specification of 1S 12A ESC

  • Built-in ESC with 12A continuous and peak 25A current
  • Input voltage: 1S Lipo
  • ESC firmware: Z_H_30_REV16_7.HEX
  • Signal support: D-shot150, D- shot300, D-shot600, Oneshot125, Multishot, PWM

This new BLHeli_S firmware (named Z_H_30_REV16_7.HEX) is supported by BLHeli Configurator, BLHeliSuite, and Bluejay Configurator.

Diagram for F4 1S 12A AIO FC

UART1, UART2, and SBUS pads are left for external receivers like Frsky XM+, TBS Nano receiver so that a long receiver range is available.

Buzz pads (BUZZ+ and BUZZ-) are invalid directly. It needs some modification to make it works.

The current meter is integrated on the FC board. Here is the configuration in Betaflight Configurator.

12A 1S ESC

Should we really need a 12A ESC for 1S drones? If it is a 65mm or 75mm Whoop drone like Meteor65, 5A ESC is enough for all actions. But how about with 3" propellers and 1102/1202.5 motors? Still want smooth and powerful flying actions? The 5A ESC has developed about 3 years ago and designed for whoop drones with 0603/0802 motors. For the past year, BETAFPV team has been cooperating with BLHeli author Steffen on the 12A 1S ESC for 3" toothpick drones. Finally, it is here!

It marks "1-2S" on the board, could this FC board support 2S?

NOT Yet. The motor spins not smoothly in 2S power with the released ESC firmware. We will work on it continuously and make this board support 2S later. If you have any ideas or advice, feel free to contact us.

SPI Frsky RX

Come with the build-in SPI Frsky Receiver (CC2500 chip), F4 1S 12A AIO FC can be compatible with Futaba S-FHSS, Frsky D8, and D16 protocol. The default protocol is configured to Frsky D16 FCC out of the factory. Pilots could set up the protocol according to your own need in Betaflight Configurator.

Configuration

Protocol

FRSKY_D

Frsky D8

FRSKY_X

Frsky D16 FCC (ACCST 1.X version)

FRSKY_X_LBT

Frsky D16 LBT (ACCST 1.X version)

SFHSS

Futaba S-FHSS

Package Includes

  • 1 * F4 1S 12A AIO FC (Frsky)
  • 4 * Anti-vibration rubber dampers
  • 4 * M2 x 10mm screws
  • 4 * M2 x 10mm screws
  • 8 * M2 screw nut

Browse more

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 13219572391

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 893 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
C
Verified Purchase
Charlie J
West Palm Beach, US
★★★★★ 4
Good quality
Size: 10 sqft
I wish it was a little better but it definitely works great and look good for how cheap it is
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 23, 2026
R
Verified Purchase
R. Selberg
Belleville, US
★★★★★ 5
Works well
Size: 10 sqft
Worked great at a budget price. I used it to damp a fiberglass loudspeaker horn. Easy to work with too.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 8, 2026
D
Verified Purchase
Devan
San Leandro, US
★★★★★ 5
Good material but bites back
Size: 20 sqft
Very good product for my rear trunk and backseat on my mustang. I would recommend some type of gloves due to the foil itself when placing down will cut up your hands and fingers. Overall good product for its price.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 23, 2026
H
Verified Purchase
Harold Rondon
Grantham, US
★★★★★ 5
amazing product
Model: 36 Sqft
actually surprised how great the product is and way better priced then other companies. its sticky and also has thickness enough to cover metal parts on cars. i would recommend 100% just ordered another 18ft for the rear deck and to have some extra! does not smell. easy to install and helps stop vibration.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 10, 2026
A
Verified Purchase
Amazon Customer
West Palm Beach, US
★★★★★ 5
No more scrolling. Best price, abundant, does its job.
Model: 36 Sqft, Model: 36 Sqft
I have it under the closed cell foam. It’s great. Just as great as Killmat and all the other butyl rubber products. Let me ask you to do something: look at the people who rated it 1 and 2 stars. No reviews. No pictures. Why? They don’t want to see the most budget friendly product getting sold. That’s some weak business. Rest assured you’ll be happy with this. Why did I buy both types? Butyl rubber helps the car not be a tin can. It keeps the outside road vibrations out. Closed cell phone keeps your music in. They work best together., Kumbaya, we have unity! We can get along, even in this age in time. The closed cell foam is cheap. You’ll get it to replace the nasty cloth under your carpet. Do the knock test. It won’t help. You need this too. And truth be told, I prefer that it has no name on it. I’m not paying money so you can brand yourself on my car. Ps: these products go on and don’t come off. Don’t mess up. It’s the same for the competitors and the closed cell foam. One shot. Do it right the first time. I’m writing this review after I used up my first box and am getting more. Happy returning customer.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 17, 2026

recommand products