Makita Reciprocating Saw JR3051T 12 AMP Corded Electric Power Tool (1-3/16 Inch Stroke 3000 SPM Variable Speed Wood Metal Demolition Cutting Wrench)

High Velocity 12 AMP Reciprocating Performance and Internal Protective Seals for Industrial Demolition Work

The Makita JR3051T 12 AMP Corded Reciprocating Saw is an electric inline demolition saw engineered to execute high-capacity rough cuts through wood, metal, and structural composites. Driven by a powerful 12.0 AMP motor delivering a variable stroke rate of 0 to 3,000 strokes per minute, this handheld power saw utilizes a long 1-3/16 inch stroke length to accelerate material removal. The mechanical layout features a tool-less lever-action blade clamp, integrated dust-excluding rubber and felt internal seals to shield the motor, a well-balanced 7.3-pound framework, and an onboard tool hook to withstand intense contractor framing and plumbing tear-out applications.

Best Used For:

• Structural Timber Demolition: Slicing down thick framing timber walls, structural wood studs, and nail-embedded lumber assemblies up to 10 inches deep.
• Heavy Metal Pipe Slicing: Sectioning thick-walled carbon steel pipes, black iron plumbing conduits, and copper water lines up to 5-1/8 inches in diameter.
• Renovation Structural Tear-out: Rapidly carving away old wall drywall framing layouts, plastics, subflooring materials, and framing fasteners during building remodels.

Key Performance & Safety Features

• Extended Stroke Length: Long 1-3/16 inch mechanical stroke paths increase the cutting plane per cycle to optimize chip clearing and speed up cutting.
• Tool-Less Lever Exchange: Quick-release lever-action blade holder facilitates instantaneous, manual swaps of hot reciprocating blades without requiring hex keys.
• Dust Exclude Seal Matrix: Protective labyrinth rubber and felt composite barriers wrap around the internal piston shaft to prevent silica dust and slurry from fouling the motor.
• Two-Finger Variable Trigger: Extended ergonomic acceleration switch accommodates multiple fingers to afford fine speed scaling and lessen grip fatigue.
• Overhead Balanced Framework: Optimized inline distribution keeps net weight to 7.3 pounds, easing operator strain during vertical structural trimming.

What's Included

• (1) Makita JR3051T 12 AMP Corded Reciprocating Saw
• (1) 6" 6TPI Wood Cutting Recipro Saw Blade (723054-A-1)
• (1) 6" 18TPI Metal Cutting Recipro Saw Blade (723066-A-1)

Technical Specifications

Pro-Tip: When cutting heavy-wall steel pipes or cast-iron lines, apply firm downward pressure to keep the adjustable saw shoe pinned completely flat against the workpiece; matching raw tool force to a secure mechanical pivot boundary removes tooth chattering vibrations and prevents premature blade fractures.