Portable Starter Sheep System

Portable Starter Sheep SystemThe Portable Starter Sheep System is made with a hot dipped galvanized finish. The sides can be adjusted for width and the joining pins are long enough that they can be driven into the ground. All Ritchie Sheep handling equipment has safe edged sheeting to prevent cuts and abrasions. On the straight sheeted sections the sheet is folded over the frame and the joints are recessed for strength. Heavy duty panelling is used for long working life. A

The Portable Starter Sheep System is made with a hot dipped galvanized finish. The sides can be adjusted for width and the joining pins are long enough that they can be driven into the ground. 

All Ritchie Sheep handling equipment has safe edged sheeting to prevent cuts and abrasions. On the straight sheeted sections the sheet is folded over the frame and the joints are recessed for strength. Heavy-duty panelling is used for long working life. 

A Portable Starter Sheep System can easily be assembled using the following components:

• 4 x 4 ft Sheeted Panels
• 2 x 8 ft Sheeted Panels
• 1 x 4 ft Open Rail Panels
• 1 x 8 ft Open Rail Panel
• 1 x Race Joiner
• 15 x Joining Pins
• 1 x 2 ft Guillotine Gate (can choose the Guillotine - Walk through Gate instead for extra money)
• 1 x 8 ft Lift/Slide Gate
• 1 x 8 ft Two Part Gates in Frame
• 1 x Draft/Stop Gate
• 2 x Curved Panels

Optional :

• Remote Control Lever
• Foot Rot Bath