Pay in installments of $22.50 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 19 - Jul 24
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
AA 2016-2020 RZR Turbo & 2018-Up RS1 Primary Clutch Fan Blade by Aftermarket AssassinsThis primary clutch fan blade is a must have for anyone with the turbo RS1 clutches! The primary clutch has fins on the back side to aid in airflow, but is lacking airflow on the spring side of the clutch. With this fan blade we scoop air and force nearly 50 CFM more air through the clutch ducting over stock above 8200 RPM. This results in a cooler running CVT system and less blown belts. Fits all year 2016 2020 RZR Turbo, Turbo S, & RS1 models Does
- This primary clutch fan blade is a must have for anyone with the turbo/RS1 clutches! The primary clutch has fins on the back side to aid in airflow, but is lacking airflow on the spring side of the clutch. With this fan blade we scoop air and force nearly 50 CFM more air through the clutch ducting over stock above 8200 RPM. This results in a cooler running CVT system and less blown belts.
- Fits all year 2016-2020 RZR Turbo, Turbo S, & RS1 models
- Does NOT fit 2020-2021 Pro XP or 2021 RZR Turbo or Turbo S models
- On our meter in the factory clutch ducting, the stock CVT rated at 407 CFM @ 8200 RPM. With the clutch fan blade we saw 457 CFM @ 8200 RPM
- Airflow is better at idle to wide open throttle and ramps up the higher the engine speed
- Installs easily with the supplied longer bolts right over the factory spring plate
- Adds support to the clutch towers for rigidity helping clutch life and performance
- Weighs in at only .4lbs, so extremely lightweight
- Made from anodized aluminum
- Keep in mind if you are thinking of going with a CVT blower that they actually restrict airflow at higher RPM's where you need it most. Our clutch fan blade will perform better than any CVT blower from 5000 RPM and up where you need it most.
- In rare occasions clearance your plastic clutch cover may be needed if the cover is slightly warped. This would be an extremely small amount and would not effect looks or performance of the clutch cover. Simply use sand paper or a die grinder if you see the fan blade rubbing (It would actually be the bolts rubbing).
- Fits all 2016-2019 RZR XPT, Turbo S, and RS1 Models
Shipping only $7.99 with in the lower 48 states
SS
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 30 reviews
Sort
Product Reviews
★★★★★ 5
Great for the price you pay
Size: 16.5 Inch, Color: Rustic Brown, Size: 16.5 Inch, Color: Rustic Brown
Great shelves for the price you pay. They look good and seem to have good stability so far; we’ll see if anything falls on heads. I put a 6 pack of each up in my son’s rooms and they have all kinds of stuff from katanas to books to knick knacks on them. The shelves aren’t finished so they can leave slivers and might be harder to clean with just a cloth. They came with 6 pieces of wood, not pre-drilled or with any marks for holes, a pack of pretty tough brackets, and all mounting hardware. We used a level, hammer, stud finder, tape measure, the provided wall anchors, long and short screws, pencil, 13/64 drill bit, Phillips head bit, and drill. These helped save space and get rid of some of their clutter.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 10, 2026
★★★★★ 3
Not the best.
Size: 16.5 Inch, Color: Rustic Brown, Size: 16.5 Inch, Color: Rustic Brown
The wood style is burned wood without any sealant. I would have given a better rating but some of the shelving was bowed which makes it not look as appealing. Pretty easy to install. Definitely will need your impact. I can’t imagine trying to do that with a hand held screwdriver.
With the wood being bent the quality isn’t what I would want it to be. It can hold a decent amount of weight. But certainly not made for books. Even with wall anchors.
It gives you the option to hang it as shown in its picture or the other way where the supports are flipped.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 25, 2026
★★★★★ 5
good
Size: 23.6 Inch, Color: White
I recently added this bathroom shelf, and it’s been a great upgrade for organizing my space. It was easy to install and feels sturdy enough to hold everyday essentials like toiletries, skincare products, and small containers without any issues.
The design is simple and clean, which helps it blend in nicely with the rest of the bathroom. It doesn’t take up much space but still provides enough storage to reduce clutter around the sink or shower area.
One thing I appreciate is how practical it is for small bathrooms—everything is within reach, and it makes the space feel more organized overall. As long as it’s installed properly, it holds up well and stays secure.
The only downside is that heavier items might not be ideal depending on the material, but for regular use, it does the job perfectly.
Overall, a functional and affordable solution if you’re looking to add extra storage and keep your bathroom tidy.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2026
★★★★★ 5
Perfect!!
Size: 23.6 Inch, Color: Rustic Brown, Size: 23.6 Inch, Color: Rustic Brown
Easy to hang and stunning!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 30, 2026
★★★★★ 5
Good quality shelves
Size: 23.6 Inch, Color: White, Size: 23.6 Inch, Color: White
Very good quality. Easy to install. Love them in my bathroom.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 18, 2026
recommand products
Soul Sisters - Personalized Custom LED Candle
18.99
Family Of The Year Cat Version - Personalized Custom Acrylic Ornament
16.99
Love You Forever Autumn - Personalized Custom Suncatcher
20.99
Beside My Cat - Personalized Custom 3D Effect Christmas Lantern
17.99
First Christmas With Mom - Personalized Custom Long Sleeve Baby Onesie
20.99