Reflex RTTV15I 15mm Standard Tempering Mix Valve

Reflex RTTV15I 15mm Standard Tempering Mix ValveOverview Reflex RTTV15I tempering mix valve has BSP 15mm 1 2" compression fittings at all three ends and features copper olives. Australian Watermark approved. The Reflex tempering valve is compatible and direct swap for most mainstream tempering valve brands such as AVG, AW, Reliance, Thomson and Nefa with same functions, fitment and similar physical size. The Reflex RTTV15I tempering valve can automatically mix the cold and hot water inputs and

Overview

Reflex RTTV15I tempering mix valve has BSP 15mm 1/2" compression fittings at all three ends and features copper olives. Australian Watermark approved. The Reflex tempering valve is compatible and direct swap for most mainstream tempering valve brands such as AVG, AW, Reliance, Thomson and Nefa with same functions, fitment and similar physical size.

The Reflex RTTV15I tempering valve can automatically mix the cold and hot water inputs and output a steady 50 deg hot water after mixing. The tempering valve is required in Australia by law in the plumbing rules as it is a safety device. Without mixing, the hot water straight from the hot water services can exceed 70 deg and can cause severe instant burns when in contact with skin. 50 deg feels hot, yet without the dangers of burning. When required, the output temperature of the Reflex RTTV15I tempering valve can be adjusted between 35-55 deg.

The Reflex RTTV15I tempering valve features loose nuts connection on the cold and hot inlets. This allows for easy removal and servicing of the stainless steel mesh filters in the tempering valve's life cycle. 

Technical Details

• Brand: Reflex
• Model: RTTV15I
• Watermark License Number: WMKA21793
• Thread Size: 1/2" (15mm) BSP Compression with Copper Olives (15C x 15C x 15C)
• Physical Thread Measurement: 20.995mm internal/external thread diameter (Refer to the BSP sizing chart in the photo gallery) 
• Material: DR Brass Body and stainless steel filter mesh
• Maximum Hot Water Supply Temperature: 99 deg
• Adjustable Outlet Temperature: 35-55 deg
• Set Temperature: 50 deg Standard
• Accuracy of Outlet Temperature: +3 deg (Tested as per AS4032.2)
• Minimum Temperature Differential: 15 deg
• Maximum Working Pressure: 1600Kpa (Static) and 500Kpa (Dynamic)
• Minimum Flow Rate: 4L/Min
• Features: Loose nuts to allow easy removal of the hot and cold inlets ends for servicing and cleaning
• Intended Use: Solar Hot Water Heater, Instantaneous Gas, Heat Pump, Standard Hot Water Heater and Storage Gas Water Heater
• SKU: RTTV15I

Package Contents

• Reflex RTTV15I Tempering Valve 
• Package Weight: 650g