Arc Air style Gouging Torch 3000PSI 500 Amp RK-3

Arc Air style Gouging Torch 3000PSI 500 Amp RK-3For gouging, cutting, beveling, piercing and flushing metal. Gouge holes in cast iron and steel. 2 meter Swivel Cable. 3000 # Pressure Capacity. 500 Amp Technical Data An ordinary welding machine is normally used as a power source for the torch. Care must be taken to assure that the machine is of sufficient size to produce the required current. Amperage required depends upon the size (diameter) of the gouging rods you're wanting to use. Our selection

For gouging, cutting, beveling, piercing and flushing metal. Gouge holes in cast iron and steel. 2 meter Swivel Cable. 3000 # Pressure Capacity. 500 Amp

Technical Data

An ordinary welding machine is normally used as a power source for the torch. Care must be taken to assure that the machine is of sufficient size to produce the required current. Amperage required depends upon the size (diameter) of the gouging rods you're wanting to use.

Our selection of Gouging Rods at terrific pricing

Compressed Air Requirements

Compressed air at 80 to 100 psi (5.62 to 7.03 kg/cm2) and 30 to 35 cfm (0.85 to 0.99m3/min) is required for optimum removal of the molten metal (slag) from the gouge, groove or cut. Recommended compressor rating: (a) continuous torch use hp/7.46kw: (b) Intermittent Torch Use 7.5/hp5.59kw. Be sure that air supply lines are at least 3/8 ID are unrestricted.