Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 12 - Jul 17
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Neumann MT 48 U Audio InterfaceThe Perfect Link The MT 48 brings Neumann quality to the digital workflow. It is the first audio interface in its class that is able to capture the full dynamic range of Neumann microphones and is optimally matched to the KH Line of studio monitors and Neumann headphones. The result is an ideal signal chain without any bottlenecks: uncompromising sound quality from the microphone diaphragm to your ear. Swiss Precision Inside The MT 48 was developed in
The Perfect LinkThe MT 48 brings Neumann quality to the digital workflow. It is the first audio interface in its class that is able to capture the full dynamic range of Neumann microphones and is optimally matched to the KH-Line of studio monitors and Neumann headphones. The result is an ideal signal chain without any bottlenecks: uncompromising sound quality from the microphone diaphragm to your ear.
Swiss Precision Inside
The MT 48 was developed in close cooperation with the Swiss manufacturer Merging Technologies, whose high-precision AD converters offer a staggering dynamic range of 136 dB. This gives the MT 48 four times the resolution of comparable audio interfaces.
The MT 48 comes fully equipped for the reference-class personal studio: two extremely low-noise mic/line preamps with up to 78 dB gain, two line/instrument inputs, four monitor/line outputs and two superb headphone outputs, each with state-of-the-art AD/DA converters. The MT 48’s connectivity may be expanded via ADAT / S/PDIF and AES67; a MIDI interface is also integrated. Four separate monitor mixes can be controlled directly on the unit via touchscreen. On-board processing includes a fully parametric 4-band EQ and a 3-way dynamics processor (gate/compressor/limiter) per channel as well as a high-quality reverb. So musicians get inspiring sound for top performances. And there is still plenty of DSP power for future developments.
Record With or Without Effects. Or Both!
The MT 48 is an audio interface and digital mixing desk in one. You can use its DSP processing for monitoring only, or you can print effects while recording. Or both at the same time! Thanks to the unique Dual Output Technology, wet and dry signals can be recorded simultaneously via separate driver channels. So, if necessary, you can fall back on an unprocessed backup.
A New User Experience
Despite its enormous scope of features, the MT 48 always remains easy to operate. All settings can be made on the device itself via the built-in touchscreen. The perfect monitor mix is just a touch away! Simply use your fingers to adjust pan pots, channel faders and much more, without having to switch to a mixer software on your computer. The MT 48 can even be operated stand-alone as a mixing console. This also ensures that the MT 48 remains fully configurable in class compliant operation, which is possible on macOS as well as iPad/iPhoneOS. On PC, installation of the MT 48 Toolkit software is mandatory; on Mac, Toolkit installation is recommended for added functionality.
The MT 48 leaves nothing to be desired: audio quality at the highest level, built-in DSP processing, comprehensive expandability, and convenient operation via touchscreen. The MT 48 is the missing link in the Neumann universe, connecting microphones, loudspeakers and headphones to create the perfect studio.
NEW: Monitor Mission for Mastering and Mixing Immersive Audio
Thanks to its touchscreen user interface, the MT 48 can be configured for various application scenarios using dedicated "Missions". The Monitor Mission transforms the MT 48 into a comprehensively equipped, highly flexible, state-of-the-art monitor controller. In addition to mono and stereo setups, any surround and immersive formats can be configured. On board are precise trim and delay functions to compensate for level and time-of-arrival differences, as well as EQs with up to 24 bands per output channel for room adjustment. Flexible bass management and downmix are also part of the Monitor Mission.
In use, speaker sets and headphone cues can be conveniently managed, speakers can be muted or monitored solo, and you can switch between mono, stereo and surround or immersive formats. The Monitor Mission is the ideal tool for mixing and mastering with the flexibility required today to ensure perfect sound for every medium and every playback device.
MT 48 owners who register their device by 1 January 2025 are eligible for a free permanent license for the Monitor Mission.
NEW: The MT 48 Becomes Dante Ready™
While the MT 48 has always supported the open standard RAVENNA/AES67 for networked audio, some users requested compatibility with the Dante protocol, developed and overseen by Audinate. Due to its ease of use and high compatibility, Dante is widely used in the live and installation sector.
Starting in Q4/2024, the MT 48 will ship Dante Ready™ (indicated by a sticker on the packaging). Ex factory, the MT 48 continues to be delivered with the RAVENNA/AES67 firmware preinstalled. For Dante operation, Neumann provides an alternative Dante firmware free of charge. In addition, an 8x8 or 64x64 I/O Dante channel license is required, which must be purchased from Audinate. This ensures there are no additional costs for users who do not require Dante.
More information about Dante and a Dante Ready™ upgrade for existing customers can be found in our Dante FAQs.
Class-leading AD-converter resolution with a dynamic range of 136 dB
2 premium-quality mic/line preamps, 2 pristine line/instrument inputs
4 line/monitor outputs
2 ultra-low impedance headphone outputs with adjustable crossfeed
ADAT / S/PDIF optical I/O, MIDI/GPIO, RAVENNA/AES67, Dante Ready™
Two driver outputs per input channel for pre-FX and/or post-FX recording
Intuitive touchscreen user interface
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 923 reviews
Sort
Product Reviews
★★★★★ 4
Easy to assemble, does the job, material is shiny nylon and shows creases, minor defects, sloppy
Size: 3 Panel 12FT W, Size: 3 Panel 12FT W
The Siebwin room divider is a good idea, and for the price, it mostly delivers on the intended functionality. I ordered the 12 foot, 3-panel version mainly to hide an unfinished basement storage area that had become an eyesore. It works well for that purpose and gives the space a cleaner appearance without spending the kind of money that more decorative dividers or custom partitions cost. If you need something temporary, portable, or mainly functional, this is a viable option.
There are a few limitations that became obvious during setup and use. The first thing I noticed was that the weld quality on some of the metal poles is fairly sloppy. Once the cover is installed, you do not really see it, but up close, it does not look especially refined or professional. The blackout material also is not a matte canvas style fabric as I expected. It has more of a shiny nylon appearance, and the creases are fairly visible. Being that it’s more of a nylon, I’d be hesitant to try steaming it to remove the creases. However, the creases do not matter if you are using it in a basement, dorm, or shared room, but for photography, video work, or a professional office setting, the appearance could be disappointing. The fabric is thick enough, though. It blocks visibility well enough, but strong light behind it still shows through to some extent, nothing deal-breaking. Also, my fabric appeared to be slightly defective. The hook and loop strip on one of the bottom sections was off-center and couldn't be totally attached because it was lined up with one of the legs. I originally hoped to use this as a video backdrop, but I will probably end up replacing the fabric with a proper green screen or canvas material while continuing to use the frame itself. For now, it does a good job of covering my basement junk.
Assembly was actually easier than I expected and took roughly 15 to 20 minutes. The longer vertical poles are tethered together similarly to tent poles, which made setup straightforward and fairly intuitive. The shorter horizontal pieces slide and snap together to the top and bottom of the vertical assembly. After each section is assembled, the divider panels connect together with metal plates and two knurled screws (at the top and bottom), so no tools are really required. A few screws were difficult to start because paint had gotten into the threads, but once they caught, they tightened down normally. The feet install with similar knurled fasteners and help keep the divider reasonably stable. One thing to watch for during setup is the fabric orientation. There is one arrow indicator in the middle of the fabric to indicate up. However, if you need another indicator, the smaller hook and loop strip goes on the bottom while the longer strip goes on top. I realized mine was upside down right before finishing and had to redo it. I wasn't difficult to redo, despite the defect in mine.
The overall design is practical and easy to move around. I do like that the panels can fold and bend into different shapes depending on the space. The widened feet help stability, although when trying to stretch the fabric tight, I noticed the poles sometimes wanted to overlap slightly at the joints. Tightening everything helped somewhat, but it still happened occasionally. The divider feels adequate for normal indoor use, though I would not expect premium durability or luxury-level fit and finish at this price point. The entire device can also be easily disabled and stored in a tote if you need it completely out of the way. It comes with assembly instructions, but even if you didn’t have them, it’s easy to build without them (save a mistake or two).
In terms of value, I think the Siebwin divider mostly matches its price. Around $100 gets you a large freestanding partition with decent usability and easy assembly, but there are compromises in materials, appearance, and refinement. The defects are also off-putting, but hopefully you won't have them. Higher-end room dividers can easily cost two or three times more, so some of the tradeoffs are expected. I also noticed cheaper alternatives online, but based on the quality here, I suspect those would probably have even more issues. For practical home use, temporary privacy, hiding storage areas, or separating shared spaces, this is a good option as long as expectations stay realistic.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
★★★★★ 3
Works well but takes up more space than expected
Size: 2 Panel 8FT W, Size: 2 Panel 8FT W
This room divider does the job for creating a little extra privacy and was easy enough to set up. The panels feel decent quality and the wider feet help keep it more stable than some cheaper screens I’ve tried. My only issue is that it takes up a bit more room than I expected, especially with the feet sticking out. It’s still portable and folds away nicely, but definitely measure your space first. Overall it works well for separating a room or blocking off an area temporarily. i wish it came in other colors
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
★★★★★ 5
Nice divider, serves it's purpose well!
Size: 3 Panel 12FT W
This room divider worked out very well for what I needed. I wanted a simple way to create a little more privacy and separation in a larger room without doing anything permanent, and this divider was an easy solution. The panels provide good coverage, and the black color gives it a clean, modern appearance that blends in nicely with different décor styles.
Assembly was fairly straightforward, and once set up, the wider feet helped keep the divider stable on the floor. I was especially happy with how flexible the panels are to arrange. You can keep it mostly straight, angle it around furniture, or create a more enclosed private space depending on the layout you need.
The material allows light to filter through slightly while still offering a noticeable sense of privacy. I’ve used it for separating a workspace area, but it would also work well in bedrooms, apartments, dorms, studios, or shared living spaces. Another plus is that it can be folded and moved without too much effort when you want to change the setup.
Overall, this divider delivers a good balance of functionality, portability, and appearance. It’s a practical option for anyone needing temporary room separation without installing permanent walls or curtains.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
★★★★★ 5
Perfect for Adding Privacy to a Piano Studio
Size: 2 Panel 8FT W, Size: 2 Panel 8FT W
I Ordered the 2 Panel version which is way too big for my needs... that's on me. So keep in mind that the picture shows a fabric made for two panels only being used on one and hence it is not pulled tight; it would pull tight and not be so wrinkly if it was set up properly as two panels. The metal pools that make up the panels seem to be well made, stable, and of good quality. They were very easy to put together and they stand up tall with plenty of height. The appearance of it with the fabric on it isn't as elegant as it could be, but it still looks good enough. The material is plenty solid, not allowing light through it, and thereby making a solid barrier. I am using it to block the view out the studio door when a student is sitting at the piano to avoid distractions from the hallway. It will allow a student to enter the studio with our distracting the student who is at the piano.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
★★★★★ 5
Room Divider That Gives Instant “This Is a Separate Space Now” Energy
Size: 3 Panel 12FT W
The Siebwin 3 Panel Folding Privacy Screen is surprisingly effective at changing the feel of a room without requiring construction, commitment, or somebody yelling about load bearing walls. The 12 foot width gives a substantial amount of coverage, making it useful for creating privacy, dividing open areas, blocking visual clutter, or setting up temporary sections within larger rooms. This saved us a ton of time and money in our new studio and enabled us to create a kitchen and office in one room.
The wider feet make a huge difference because flimsy room dividers that collapse every time someone exhales too aggressively are deeply annoying. This one feels more stable and grounded once positioned. The folding design makes it easy to move around or adjust depending on the space, and it folds down relatively compactly when not in use. It is basically the introvert curtain wall of dreams.
The material has a clean, neutral look that blends well into different room styles without screaming “temporary office cubicle panic.” It works well for apartments, studios, shared spaces, dressing areas, or simply hiding the mountain of chaos you swear you are going to organize tomorrow. Practical, portable, and refreshingly easy to use without turning setup into a three hour emotional event.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 16, 2026