D-100 Entry-Level Infrared Dryer

Compact Entry Level Infrared Conveyor Dryer

Entry level tabletop dryer with 18" (45.7 cm) wide conveyor belt cures up to 110 plastisol-printed garments/h, 50 discharge-printed garments/h, and DTF adhesives at high rates. Adjustable heater height/angle, heat intensity and belt speed provide full operator control. 120V and 240V models with optional powered exhaust remove moisture and fumes — critical for rapid drying of water-based inks and discharge, and curing of DTF adhesives.

Variable controls for both heat intensity and conveyor speed allow fine-tuning of the drying process according to ink type, ink coverage, desired cure temperature, and rate at which items are being screen printed, or coated with DTF adhesives.

The heater can be raised, lowered and pivoted using lock knobs on the sides of the heating chamber according to the thickness of printed garments and/or the angle of printed images on irregularly shaped items, for uniform curing of the printed area using minimum energy. Heater shields are included as standard to maximize edge-to-edge temperature consistency for increased image quality.

Dense coil pattern, heater shields and a 6.35 watt per sq in (0.98 watt per sq cm) infrared heater eliminate hot and cold spots and provide the power you need to get the job done.