Pay in installments of $362.38 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 19 - Jul 24
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Sun Gold Power 12kW 48V Split Phase Inverter Charger 36kW SurgeProduct Overview This Sun Gold Power 12,000W 48V split phase pure sine wave inverter charger is built for battery based power systems that need stable 120V and 240V AC output for real household and commercial electrical loads. It converts 48V DC battery power into clean AC power, while also handling AC battery charging and automatic transfer switching in one unit. That keeps your system layout simpler and helps the power setup behave more like a built
Product Overview
This Sun Gold Power 12,000W 48V split-phase pure sine wave inverter charger is built for battery-based power systems that need stable 120V and 240V AC output for real household and commercial electrical loads. It converts 48V DC battery power into clean AC power, while also handling AC battery charging and automatic transfer switching in one unit. That keeps your system layout simpler and helps the power setup behave more like a built-in utility source for backup, off-grid operation, and day-to-day power management.
Split-phase output delivers both 120V and 240V AC, which supports typical mixed loads without forcing workarounds. The output waveform is pure sine wave, designed for stable power delivery. With 12.0 kW continuous output and 36.0 kW surge power, this inverter charger is sized for systems that need strong headroom for start-ups and short-duration demand spikes. Output frequency is selectable between 50 Hz and 60 Hz, supporting different site requirements.
This unit includes a built-in automatic transfer switch with a typical transfer time of 10 ms. In practical terms, that supports steadier power when switching between sources. It also supports configurable AC or battery priority operation, so the system behavior can be set based on how the site wants to use AC input and battery energy. Automatic generator start support and remote control give additional control paths for larger battery systems where generator runtime and oversight need to be managed. Battery temperature sensing is included for better visibility and charging management within the system’s supported operation.
On the charging side, it accepts 240V AC input and supports an AC input voltage range of 184–253 Vac or 140–270 Vac, with AC input frequency listed as 50 Hz or 60 Hz. Charger current is up to 115 A with a charger breaker rating of 80 A. Charger output voltage is dependent on battery type, and it is compatible with multiple battery types including lithium, gel, AGM, and lead-acid. For standby efficiency, idle power consumption is listed at 40 W with power saver on and 180 W with power saver off.
Key Features
- Combines inverter, AC charger, and automatic transfer switch in a single unit
- Supports split-phase operation with 120V and 240V AC output
- Configurable AC or battery priority operation
- Compatible with multiple battery types including lithium, gel, AGM, and lead-acid
- Includes automatic generator start support, remote control, and battery temperature sensing
Specifications
- Continuous output power: 12.0 kW
- Surge power: 36.0 kW
- Output waveform: pure sine wave
- AC output voltage: 120 V, 240 V
- AC input voltage: 240 V
- DC battery voltage: 48 V
- Output frequency: 50 Hz, 60 Hz
- Typical transfer time: 10 ms
- Nominal DC input voltage: 48.0 V
- Minimum start voltage: 40.0 V, 42.0 V
- Low battery alarm voltage: 42.0 V, 44.0 V
- Low battery shutdown voltage: 40.0 V, 42.0 V
- High battery voltage alarm: 64.0 V
- Battery voltage recovery: 62.0 V
- Idle power consumption (power saver on): 40 W
- Idle power consumption (power saver off): 180 W
- Charger output voltage: dependent on battery type
- Charger current: up to 115 A
- Charger breaker rating: 80 A
- AC input frequency: 50 Hz, 60 Hz
- AC input voltage range: 184–253 Vac, 140–270 Vac
- Unit weight: 160 lb
- Unit dimensions: 27.6 × 16.5 × 8 in
- Shipping weight: 185 lb
- Shipping dimensions: 29.2 × 23 × 16.5 in
What’s Included
- 12.0 kW 48V split-phase pure sine wave inverter charger with built-in transfer switch
- Remote control
- Battery temperature sensing accessory
Best For
- Residential backup power using a 48V battery bank with 120V and 240V loads
- Off-grid systems needing 12.0 kW continuous output and 36.0 kW surge power
- Commercial or mixed-load sites that require split-phase 120/240V AC output
- Systems that recharge from 240V AC input with adjustable priority behavior
- Battery banks using lithium, gel, AGM, or lead-acid
- Generator-supported setups needing automatic generator start support and remote control
Why This One Makes Sense
This inverter charger fits installs where you want battery power to run the site in a steady, predictable way. You get 12.0 kW of continuous pure sine output with 36.0 kW surge for demanding start-ups, plus split-phase 120/240V support for mixed household and commercial loads. AC charging from 240V input with up to 115 A charger current supports recovery and daily management, while configurable AC or battery priority modes keep operation aligned with how the system is intended to run. Add a built-in transfer switch with typical 10 ms transfer time, remote control, battery temperature sensing, and automatic generator start support, and this platform is set up for real backup and off-grid use without extra complexity.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy