Hondata FlashPro TL 2006 MT Type S - CAN Wiring

Hondata FlashPro TL 2006 MT Type S - CAN WiringThis is an adapter kit to use the 2007 2008 TL FlashPro for your 2006 TL Type S. This allows full user tuning and datalogging for the 2006 TL Type S. Kit contents: CAN Adapter (optionally) CAN Adapter, 06 TL Navi & TPMS adapter You need to provide: TL FlashPro A new or used ECU from the 2007 2008 TL (MT) or 2007 TL base AT. ECU Part Number Donor Vehicle RDA A83 through RDA A84 2007 Acura TL Base Auto* RDB A02 through RDB A04 2007 Acura TL MT Type S

This is an adapter kit to use the 2007-2008 TL FlashPro for your 2006 TL Type-S.  This allows full user tuning and datalogging for the 2006 TL Type-S.

Kit contents:

• CAN Adapter
• (optionally) CAN Adapter, 06 TL Navi & TPMS adapter

You need to provide:

• TL FlashPro
• A new or used ECU from the 2007-2008 TL (MT) or 2007 TL base AT.

* The Auto ECU needs a hardware modification for cruise control to work.

The CAN adapter cable connects from the DLC to the CAN bus connector. See the install instructions.

No ECU adapter is necessary for the 2006 TL Type-S.

Sales Market

This FlashPro can only be sold to US/Canada addresses.

Swap ECU

* The Auto ECU needs a hardware modification for cruise control to work.

Features

• Programmable ECU interface.
• Connects via OBDII diagnostic port.
• USB 2.0 connection
• Works with Laptop or Desktop
• No ECU modification necessary.
• Live Tuning
• 20 hours on board datalogging memory.
• Security Password.
• FlashProManager Windows software.
• Check and clear diagnostic codes.
• Custom laptop gauges.
• Dual calibration storage - upload from one of two calibrations stored in the FlashPro

2007-08 TL tuning features

• Ignition, fuel, idle speed, table editing.
• VTEC window.
• MAP sensor based tuning.
• Rev and launch limiters.
• Map tracing  & lambda overlay.
• Expanded fuel, ignition and knock tables for forced induction.
• 4 bar MAP sensor support (43 psi).
• Support for larger injectors.
• Injector latency / dead time.
• Individual cylinder fuel & ignition trim.
• Individual cylinder knock count
• Works with Hondata Traction control
• Starting calibrations for NA, forced induction & larger injectors.

For a more detailed feature lists see the FlashPro help file.

Check ECU Compatibility

To ensure that you order the correct FlashPro we recommend that you check your ECU is supported.

The ECU part number is located on the ECU. The ECU is located in the engine bay near the battery. You may need to remove a plastic cover in order to see the sticker containing the part number.