Pay in installments of $47.25 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 19 - Jul 24
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Happymodel Crux35 Analog ELRS V2 2.4GHz 4S with Caddx Ant Camera Micro Freestyle FPV Drone - BNFCRUX35 is an ultra lightweight 3. 5Inch FPV Freestyle FPV Racing Drone, the weight of the whole drone is only 87g for the analog version. The Crux35 drone uses Happymodel EX1404 high efficiency motor and HQPROP 3. 5 inch three blade propeller to ensure the largest thrust to weight ratio under the most efficient premise, which can bring you a smooth Freestyle flying experience. The analog version is equipped with CADDXFPV Ant ant camera. The receiver
CRUX35 is an ultra-lightweight 3.5Inch FPV Freestyle FPV Racing Drone, the weight of the whole drone is only 87g for the analog version. The Crux35 drone uses Happymodel EX1404 high-efficiency motor and HQPROP 3.5-inch three-blade propeller to ensure the largest thrust-to-weight ratio under the most efficient premise, which can bring you a smooth Freestyle flying experience.
The analog version is equipped with CADDXFPV Ant ant camera.
The receiver version is the UART ExpressLRS ( SPI version is discontinued )
Recommended (Not Included): Battery 4S 14.8v 750mAh to maximum 1100mAh.
You can choose from our Compatible 4S Lipo Packs here
Check out The HappyModel Crux35 Frame and Parts Collection, all our Analog BNF Drones and the rest of our Happymodel Products!
Features
- Ultra-lightweight 3.5-inch BNF FPV Freestyle Drone
- Integrated ExpressLRS UART receiver
- High efficiency EX1404 power system
- Can be equipped with Naked Gopro or SMO4K
- Support 3-4S battery 4S 750mah battery is recommended, maximum support 4S 1100mah
Specifications
- Wheelbase: 150mm
- Weight: Crux35 87gram
- Size: 130mmx130mmx45mm(without propellers)
- Receiver: UART ExpressLRS 2.4GHz
- Caddx Ant Camera +OVX303 or OVX306 VTX
- Flying time: 9min~15min 4s 750mah battery
Motor
- Model: EX1404
- KV options: KV3500
- Configu-ration:9N12P
- Stator Diamter:14mm
- Stator Length:4mm
- Shaft Diameter: Φ1.5mm
- Motor Dimension(Dia.*Len):Φ15mm*15mm
- Weight(g):9g
Propellers
- Propeller Diameter: 3.5 inch
- Pitch : 2
- Blades : 3
- Material : Poly Carbonate
- Weight : 1.5g
- Hub Diameter : 10mm
- Hub Thickness:4.7mm
- Shaft :1.9/1.5/1.9mm
- Adaptor Rings : NO
Flight controller
- (UART ELRS Version)
- CrazybeeF411 ELRS
- MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
- Sensor: ICM42688P or BMI270 (SPI Control)
- Mount pattern: 25.5×25.5 M2
- Size:32*32*5mm
- Power supply: 2-4S Lipo battery
- Built-in 20A Blheli_s ESC each
- Built-in Betaflight OSD(SPI Control)
- Built-in UART ExpressLRS 2.4GHz receiver
- Built-in 5V 1.5A BEC
- Flight controller firmware target: CRAZYBEEF4DX
Onboard 4in1 ESC
- MCU upgraded to EFM8BB21
- Power supply: 2-4S LiPo/LiPo HVCurrent: 12A continuous peak 15A (3 seconds)
- Support BLHeliSuite programmable
- Factory firmware: F-H-40
- Default protocol: DSHOT300
Onboard UART ExpressLRS 2.4GHz Receiver
- Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
- RF Frequency: 2.4GHzAntenna plug: IPEX
- Telemetry output Power: <12dBm
- Receiver protocol: CRSF
- Default firmware version: ExpressLRS V3.0.1
(Analog version)
Caddx ANT 1200tvl camera
- Image Sensor: 1/3″ CMOS Sensor
- Horizontal Resolution: 1200 TVL
- TV System: NTSC or PAL
- IMAGE: 16:9 or 4:3
- Synchronization: Internal
- Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
- S/N Ratio : >52dB (AGC OFF)
- Video Output: CVBS
- Lens: 1.8mm
- Min. Illumination: [email protected]
- Auto Gain Control: YES
- BLC: YES
- WDR: Global WDR
- DNR: 3D DNR
- Dimensions: 14*14mm(with bracket to 19*19mm)
- Wide Power Input: DC 3.7-18V
- Work Temperature: -20℃~+60℃
- Weight: 2g (N.W.)
OVX303/306 5.8Ghz VTX
- Model: OVX303/306
- Frequency: 5.8G 40CH
- Transmitting Power: 0/RCE/25mw/100mw/300mw
- Power supply: DC 5V
- Current (5v): <650ma (300mw)
- Weight: 1.5gram without antenna
Package Includes:
- 1 x Crux35 Frame
- 1 x CrazyF411 ELRS FC with UART ELRS
- 1 x Caddx Ant Camera
- 1 x Happymodel OVX303/306 5.8G analog VTX
- 4 x Happymodel EX1404 KV3500 brushless motor
- 1 x HQProp T3.5X2X3Grey (4cw+4ccw)
- 1 x Screw Driver
- 1 x Buckle Velcro for battery
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy