Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 4 - Jul 9
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
2 Light - LED Large Up and Down Sconce - 20W - 3000K - Black Finish 120-277VFinish Black Category Outdoor Sub Category Architectural Wall Style Utility Avg Rated Hours 50000 Bulb Shape1 Integrated LED Bulb Type1 LED Color Temperature Warm White Diameter 3. 35 Dimmable Non Dimmable Each Height(in) 12. 8 Each Length(in) 5. 91 Each Width(in) 5. 71 Lumens 1800L Tariff Code 9405. 11. 6020 Warranty 5 Years Amps 0. 167 0. 072A ANSI Base Integrated BAA Compliant No Beam Angle 40 CA Prop 65 Lead CCT Selectable No CEC T20 Exempt
| Finish | Black |
| Category | Outdoor |
| Sub Category | Architectural Wall |
| Style | Utility |
| Avg Rated Hours | 50000 |
| Bulb Shape1 | Integrated LED |
| Bulb Type1 | LED |
| Color Temperature | Warm White |
| Diameter | 3.35 |
| Dimmable | Non-Dimmable |
| Each Height(in) | 12.8 |
| Each Length(in) | 5.91 |
| Each Width(in) | 5.71 |
| Lumens | 1800L |
| Tariff Code | 9405.11.6020 |
| Warranty | 5-Years |
| Amps | 0.167/0.072A |
| ANSI Base | Integrated |
| BAA Compliant | No |
| Beam Angle | 40 |
| CA Prop-65 | Lead |
| CCT Selectable | No |
| CEC | T20 Exempt - Fixtures Not Regulated |
| CEC Terse | Lawful for sale in California |
| CEC Web Text | Lawful for sale |
| Connection | Direct Wired |
| Country Of Origin | Thailand |
| CRI | 90+ |
| Each Cube | 0.25 |
| Each Quantity | 1 |
| Efficacy | 90.00 LPW |
| FCC Compliant | Yes |
| Feature 1 | Nuvo 62-1144R1 Outdoor LED lighting finished in black with up and down-lights |
| Feature 10 | Dust lightly with a soft cloth for easy cleaning |
| Feature 2 | Integrated LED features 20 watts, 90 CRI, 3000K |
| Feature 3 | Illuminate your home with 1800 lumens and a warm white color temperature |
| Feature 4 | LED lighting provided adds up to significant savings on energy costs, and is rated for up to 50,000 hours with average use |
| Feature 5 | A five year limited fixture warranty brings peace of mind with your purchase |
| Feature 6 | For outdoor use including wet locations |
| Feature 7 | Fixture for use with standard 120/277 voltage |
| Feature 8 | Applications suitable for home exteriors |
| Feature 9 | Mount up or down, and contains installation hardware and instructions |
| Finish Family | Black |
| Has Camera | No |
| Has Emergency Battery | No |
| Incandescent Equivalent | 100W |
| Indoor Outdoor | Outdoor |
| Installation Notes | Mounts Up and Down |
| IOT Enabled | No |
| IP Rating | IP65 |
| JA8 Compliant | No |
| Long Description | Satco's 62-1144R1 two-light large sconce is the ideal solution for a variety of applications. Illuminate hallways, entryways, lobbies, and patios with this elegant wall sconce with a black finish. Elegant and versatile, this wall sconce delivers 50,000 |
| Material | Die-Cast Aluminum |
| Mounting Extends | 0.63 |
| Mounting Height(in) | 4.53 |
| Mounting Procedure | Wall |
| Mounting Width(in) | 4.53 |
| Operating Frequency | 50/60Hz |
| Operating Temp | -30C (-22F) to +50C (+122F) |
| Order In Multiples Of | 1 |
| Pack Type | Box |
| Photocell | No Photocell |
| Power Factor | >0.9 |
| Quantity In Pack | 1 |
| R9 Value | 63 |
| Replaceable Light Source | No |
| RoHS Compliant | Yes |
| Romance Copy | Satco's two-light large sconce is the ideal solution for a variety of applications. Illuminate hallways, entryways, lobbies, and patios with this elegant wall sconce with a black finish. Elegant and versatile, this wall sconce delivers 50,000 hours of |
| Safety Listing | cULus - Certified |
| SDS class | LED_Fixture |
| Short Description | 2 LT LED LG UP & DOWN SCONCE |
| Temperature (CCT) | 3000K |
| Title 20 Compliant | Exempt |
| Title 24 Compliant | No |
| Up Down Installation | Universal |
| Wattage Selectable | No |
| Weight Lb.(lbs) | 2.51 |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.7 ★★★★★
Based on 1712 reviews
Sort
Product Reviews
★★★★★ 5
Sturdy. Tight fit. No wobble
Size: 2 Pairs / 4 pcs
These are the best ones I’ve found. This order will connect one wire. Luckily that’s what I needed. If you’re doing more than one wire…
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
★★★★★ 5
Superior Design!
Size: 6 Pairs / 12 pcs
Delivery was lightning fast.
I tried a pack of two pairs of these banana jacks as a sample to see if these would meet my needs. The design of these plugs is superior. The design was exactly what I wanted because the speaker wire is secured with TWO set screws. Then I ordered an additional six pairs of plugs to hook up my subwoofer to my amp and speakers.
(I feed the audio output from the amp to the sub. The sub has a crossover that keeps the low frequencies and sends the mid and treble frequencies to my bookshelf speakers.)
I love the security of two set screws on each plug and love the barrel that screws on AFTER the wire is secured by the set screws. Most banana plugs have a hole through the shaft of the plug that receives the stripped wire. Then the barrel cover is screwed down to secure the wire in the plug. This design compresses the speaker wire but eventually the cap loses it grip and allows the connection between the wire and the plug to become loose. Then the transfer of the audio signal becomes poor and the speakers sound bad. Every month or two I needed to check all the banana plugs and re-tighten many of them for the best performance. The two set screws eliminate this problem. The set screws are quite small and take a little extra care in installation. You will need a small flat blade screwdriver to tighten them. I used the 1/8" flat blade driver from a set of jewelers screwdrivers.
These well made plugs are a bit pricier that many of the banana plugs available but certainly not the priciest plugs available. For me, the slightly higher price was more than offset by the security of the wire within the plug.
I'm not thrilled with the extra tight fit of the tip on the plugs into the jacks. It took a lot of effort to insert the in the jack. Actually I "greased" the pins (very sparingly) with with non-corrosion, conductive paste (Ox-Gard, No-Corrode, etc. Do NOT use any other grease.) Next time I'll use pliers to compress the pin.
My only quibbles are that the spring pins that go into the jack are very tight and that the plugs are only sold in quantities of two pairs or 12 pairs.
I recommend these banana plugs for all who are using the banana plugs and jacks for hooking up your speakers. It's a very convenient way of connecting speakers if your speakers and amplifier have the banana jack as part of the binding post. Further, it's much safer to use banana plugs since the possibility of shorting your amplifier with a stray strand of wire is practically zero. Easy Five Stars.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 13, 2018
★★★★★ 5
Top banana
Size: 5 Pairs / 10 pcs
Theses banana plugs are hight quality non magnetic. Banana plugs easy to usexand very high quality sound different because of the better connection and quality.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026
★★★★★ 5
Very easy to use
Size: 12 Pairs / 24 pcs
I have an Onkyo audio/video receiver along with an Emotiva amplifier. Both have speaker "post" terminals which will accept banana plugs, OR I can connect the speaker wires by unscrewing the posts, poke the speaker wires into the terminals and then tighten the posts. The problem with poking the wires into the terminals and tightening the posts vs using banana plugs is that there is a risk of the wires touching the metal on the back of the chassis or touching other speaker wires, causing a short if one is not careful. With banana plugs, they simply plug into the back/top of the posts, eliminating the rsick of a short circuit. They can also be unplugged very easily if needed. Banana plugs are DEFINITELY the preferred way to connect speakers to an receiver or amplifier if they have post-style terminals.
These particular banana plugs came in a package of 12 I believe. They were very reasonably priced, and simple to connect to the end of the speaker wires. Simply unscrew the banana plugs, use a small, standard jewelry screwdriver and loosen both of the set screws, insert the speaker wire, then tighten the set screws, and then screw the banana plug back together.
The plugs have either a red band which would typically be used for your "Right" speakers, or a black band which would typically be used for the "left" speakers. The banana plugs insert into the top or front of the speaker terminal posts on the amp and receiver. They fit VERY snug, and so I did have to apply just a little bit of pressure in order to insert them into the posts, but once plugged in, rest assured they're not going anywhere. They are snug.
I highly recommend these.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 2, 2025
★★★★★ 5
Not cheap but also, not cheap!
Size: 2 Gauge Cable, Color: 20 ft Black + 20 ft Red
Came on time, as described and appears to be solid quality.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 14, 2026
recommand products
Carbide Tipped Circular Saw Blade Plastics - Profiles - Veneers / Thin-Cut 136x1,8/1,2x20/10mm14 WZ BESTSELLER
37.15
Carbide Tipped Circular Saw Blade Portable circular saws 330x3,2/2,2x30mm 24 WZ - PH: UNI BESTSELLER
61.50
Carbide Tipped Circular Saw Blade Chop- and mitre circular saws 210x2,8/1,8x30mm 48 WZN - PH: 2-7-42
71.15
Carbide Tipped Circular Saw Blade Plastics - Profiles - Veneers / Thin-Cut 200x2,0/1,4x30mm 80 WZ- PH: 2-7-42 BESTSELLER
105.00
Carbide Tipped Circular Saw Blade Plastics - Profiles - Veneers / Thin-Cut 216x2,0/1,4x30mm 80 WZ- PH: 2-7-42 BESTSELLER
107.70