Cornhole Board Wraps - Eagle #1 Waving American Flag Patriotic Military - 2 PACK

Cornhole Board Wraps - Eagle #1 Waving American Flag Patriotic Military - 2 PACKCornhole Board Wraps Eagle #1 Waving American Flag Patriotic Military 2 PACK This listing is for two 24. 5" x 48. 5" Cornhole Board Wraps. Boards are not included. Each wrap is printed at 1440 dpi on 3M Vinyl with Eco Solvent inks providing clean and crisp images. These wraps are Trim to Fit in which the installer will need to trim both the excess off the sides and the hole in the center. This allows for a smooth, clean fit to any board under 24. 5" x

Cornhole Board Wraps - Eagle #1 Waving American Flag Patriotic Military - 2 PACK 
This listing is for two 24.5" x 48.5" Cornhole Board Wraps.  
Boards are not included. 

Each wrap is printed at 1440 dpi on 3M Vinyl with Eco-Solvent inks providing clean and crisp images. These wraps are Trim-to-Fit in which the installer will need to trim both the excess off the sides and the hole in the center. This allows for a smooth, clean fit to any board under 24.5" x 48.5". These decals are laminated and will last 5+ years outside and even more inside. 

Please make sure to clean the surface with alcohol prior to applying the decals as any dirt, grime, conditioners, or oil may inhibit the decals ability to adhere appropriately. 

These decals are made to adhere to smooth glossy coats and therefore won't adhere very well on bare wood or MDF. You will want to give it a coat of glossy paint or clear coat and allow it 30 days to cure before installing the wrap.

If you want to use harsh chemicals to clear or shellac, note that typically we would recommend that you test the chemical with the excess vinyl you cut off after installation.  If the compound is too hot, it should affect the wrap by creating bubbles or peeling.