ISDT 608PD Charger 5-30V

ISDT 608PD Charger 5-30VISDT 608PD Charger 5 30V The ISDT 608PD 240 W miniature charger is a powerful smart charger powered by a car battery, stabilised power supply or USB C power supply with very simple and intuitive operation. The 608PD can charge common cell types (NiMH, Li Po, LiHV ULiHV, LiFe, Pb), plus it features built in six channel balancers to ensure safe charging of lithium batteries. The charger is equipped with a colour LCD and three programming buttons, which

• ISDT 608PD Charger 5-30V
  

  The ISDT 608PD 240 W miniature charger is a powerful smart charger powered by a car battery, stabilised power supply or USB-C power supply with very simple and intuitive operation. The 608PD can charge common cell types (NiMH, Li-Po, LiHV/ULiHV, LiFe, Pb), plus it features built-in six-channel balancers to ensure safe charging of lithium batteries. The charger is equipped with a colour LCD and three programming buttons, which offer you more comfortable and straightforward parameter setting, control and monitoring of the charging process.

  In addition to the "palm-size" design with high performance and intuitive operation, worth a special mention is:
  

  • Program for new high-voltage lithium batteries LiHV with an output voltage for charging of up to 4.35 V and ULiHV with an output voltage for charging of up to 4.45 V (voltage adjustable from 4.25–4.50 V)
  • Adjustable end voltage for charging lithium batteries (allows more gentle charging that pilots like, or brutal over-charging suitable for car guys)
  • Adjustable end voltage for lead-acid battery charging (2.00–2.45 V; allows charging of all types of lead-acid batteries)
  • Bluetooth in the ISD Link mobile app (Android and iOS): ability to set up, start and charge tracking
  • Can be used as a USB-C/PD2.0/3.0/3.1 charger for smartphones, tablets and similar devices

   

  Basic features and parameters overview:
  

  • Power supply 10–30 V DC (XT60 port) or USB-C (5–28 V)
  • For charging 1–16 NiMH cells, 1–6 Li-Po/Li-Fe/LiHV cells or 2–24 V lead-acid batteries
  • Adjustable charging current 0.5–10.0 A (max. 240 W) - the power supply must have a voltage of at least 24 V to fully utilize the power of the charger
  • Charging termination via delta-peak automation for NiMH batteries
  • Lithium and lead-acid batteries are charged via the "constant current/constant voltage" (CCCV) method
  • Adjustable delta-peak detection sensitivity for NiMH batteries
  • Adjustable end voltage for lithium and lead-acid battery charging
  • The charger can work as a USB-C/PD2.0/PD3.0/PD3.1 charger for smartphones, tablets and similar devices when powered by a 5–30V model battery pack (with adjustable voltage limit to prevent deep discharge)
  • Simple firmware update via USB-C port
  • Back-lit LCD with a clear and simple menu and parameter monitoring during charging
  • Programming buttons for simple setting and operation of the charger
  • Safety is ensured by several warnings (incorrect battery type/voltage, drop in supply voltage, etc.)
  • Fan for forced cooling
  • Compact plastic case, very small dimensions

   

  The charger is equipped with an XT60 socket and universal JST-XH socket for service connectors, allowing direct connection of power cables and JST-XH service connectors of 2–6S packs. If you are using packs with XT60 and JST-XH connectors, you don't need any charging cables or adapters. To connect service cables of a different system you can use standard adapters Sky RC or KAVAN.

  The set contains: ISDT 608PD charger, user manual.

  Input voltage (autobaterie - DC) [V]	5 - 30
  Charging current [A]	0.5 - 10
  Charging power [W]	240
  Channels	1
  NiMH [čl.]	1 - 16
  Li-Po [čl.]	1 - 6
  Li-Fe [čl.]	1 - 6
  Li-HV [čl.]	1 - 6
  Pb [čl.]	1 - 12
  Balancer	Yes
  Balancer current [mA]	800
  Length [mm]	72.5
  Width [mm]	60
  Height [mm]	26.6
  Weight [g]	85