Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 4 - Jul 9
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Catalytic Converter for OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter MagnaFlow 52265Overview: Keep the check engine light off with MagnaFlow OEM Grade Federal EPA Compliant Direct Fit Catalytic Converter 52265. With features including free flowing mandrel bent tubing and highly corrosion resistant, stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state of the art metrology department uses the latest 3D scanning systems during research
Overview:
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52265. With features including free-flowing mandrel-bent tubing and highly corrosion resistant, stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency.
Designed to fit the 2013-2017 BMW X3, 2013-2015 BMW X1, and more, this direct-fit catalytic converter also interchanges with OE part 18 32 7 645 664. Hardware is included to eliminate the hassle of working with corroded factory parts.
Note : Not For Sale in California
Interchange:
| Brand | Interchange Part Number |
|---|---|
| BMW | 18 32 7 645 664 |
| BMW | 18327645664 |
| BMW | 18 32 7 645 664 |
| BMW | 18327645664 |
Application:
| Year | Make | Model | Submodel | Engine Size |
|---|---|---|---|---|
| 2013 - 2017 | BMW | X3 | 2L/L4 | |
| 2013 - 2015 | BMW | X1 | 2L/L4 | |
| 2015 - 2017 | BMW | X4 | 2L/L4 |
Specs:
| Body Material | Stainless Steel |
|---|---|
| Overall Length (In.) | 21.625 |
| Substrate Material | Ceramic |
| Air Tube Adaptable | No |
| Converter Quantity | 1 |
| Inlet Attachment | Clamp-On |
| Main Piping Diameter (In.) | 3.5 |
| Oxygen Sensor Location | Pre Converter and Midbed |
| Finish | Stainless Steel |
| Material | Stainless Steel |
| Outlet Attachment | Clamp-On |
| Series | OEM Grade |
| Subtitle | Federal / EPA Compliant |
| Title | OEM Grade Direct-Fit |
| Type | Direct-Fit |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 363 reviews
Sort
Product Reviews
★★★★★ 5
Sturdy. Tight fit. No wobble
Size: 2 Pairs / 4 pcs
These are the best ones I’ve found. This order will connect one wire. Luckily that’s what I needed. If you’re doing more than one wire…
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
★★★★★ 5
Superior Design!
Size: 6 Pairs / 12 pcs
Delivery was lightning fast.
I tried a pack of two pairs of these banana jacks as a sample to see if these would meet my needs. The design of these plugs is superior. The design was exactly what I wanted because the speaker wire is secured with TWO set screws. Then I ordered an additional six pairs of plugs to hook up my subwoofer to my amp and speakers.
(I feed the audio output from the amp to the sub. The sub has a crossover that keeps the low frequencies and sends the mid and treble frequencies to my bookshelf speakers.)
I love the security of two set screws on each plug and love the barrel that screws on AFTER the wire is secured by the set screws. Most banana plugs have a hole through the shaft of the plug that receives the stripped wire. Then the barrel cover is screwed down to secure the wire in the plug. This design compresses the speaker wire but eventually the cap loses it grip and allows the connection between the wire and the plug to become loose. Then the transfer of the audio signal becomes poor and the speakers sound bad. Every month or two I needed to check all the banana plugs and re-tighten many of them for the best performance. The two set screws eliminate this problem. The set screws are quite small and take a little extra care in installation. You will need a small flat blade screwdriver to tighten them. I used the 1/8" flat blade driver from a set of jewelers screwdrivers.
These well made plugs are a bit pricier that many of the banana plugs available but certainly not the priciest plugs available. For me, the slightly higher price was more than offset by the security of the wire within the plug.
I'm not thrilled with the extra tight fit of the tip on the plugs into the jacks. It took a lot of effort to insert the in the jack. Actually I "greased" the pins (very sparingly) with with non-corrosion, conductive paste (Ox-Gard, No-Corrode, etc. Do NOT use any other grease.) Next time I'll use pliers to compress the pin.
My only quibbles are that the spring pins that go into the jack are very tight and that the plugs are only sold in quantities of two pairs or 12 pairs.
I recommend these banana plugs for all who are using the banana plugs and jacks for hooking up your speakers. It's a very convenient way of connecting speakers if your speakers and amplifier have the banana jack as part of the binding post. Further, it's much safer to use banana plugs since the possibility of shorting your amplifier with a stray strand of wire is practically zero. Easy Five Stars.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 13, 2018
★★★★★ 5
Top banana
Size: 5 Pairs / 10 pcs
Theses banana plugs are hight quality non magnetic. Banana plugs easy to usexand very high quality sound different because of the better connection and quality.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026
★★★★★ 5
Very easy to use
Size: 12 Pairs / 24 pcs
I have an Onkyo audio/video receiver along with an Emotiva amplifier. Both have speaker "post" terminals which will accept banana plugs, OR I can connect the speaker wires by unscrewing the posts, poke the speaker wires into the terminals and then tighten the posts. The problem with poking the wires into the terminals and tightening the posts vs using banana plugs is that there is a risk of the wires touching the metal on the back of the chassis or touching other speaker wires, causing a short if one is not careful. With banana plugs, they simply plug into the back/top of the posts, eliminating the rsick of a short circuit. They can also be unplugged very easily if needed. Banana plugs are DEFINITELY the preferred way to connect speakers to an receiver or amplifier if they have post-style terminals.
These particular banana plugs came in a package of 12 I believe. They were very reasonably priced, and simple to connect to the end of the speaker wires. Simply unscrew the banana plugs, use a small, standard jewelry screwdriver and loosen both of the set screws, insert the speaker wire, then tighten the set screws, and then screw the banana plug back together.
The plugs have either a red band which would typically be used for your "Right" speakers, or a black band which would typically be used for the "left" speakers. The banana plugs insert into the top or front of the speaker terminal posts on the amp and receiver. They fit VERY snug, and so I did have to apply just a little bit of pressure in order to insert them into the posts, but once plugged in, rest assured they're not going anywhere. They are snug.
I highly recommend these.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 2, 2025
★★★★★ 5
Not cheap but also, not cheap!
Size: 2 Gauge Cable, Color: 20 ft Black + 20 ft Red
Came on time, as described and appears to be solid quality.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 14, 2026
recommand products
Carbide Tipped Circular Saw Blade Plastics - Profiles - Veneers / Thin-Cut 270x2,2/1,6x30mm 80 WZ- PH: UNI BESTSELLER
113.30
Carbide Tipped Circular Saw Blade Portable circular saws 190x2,8/1,8x20/16mm 30 WZ- PH: 2-6-32 BESTSELLER
51.05
Carbide Tipped Circular Saw Blade Hard plastics - Abrasive materials - Finishing-cut / Thin-Cut 210x2,0/1,4x30mm 64TFF-P- PH: 2-7-42 BESTSELLER
82.50
Carbide Tipped Circular Saw Blade Portable circular saws 240x3,0/2,0x30mm 36 WZ- PH: 2-7-42 BESTSELLER
51.80
Carbide Tipped Circular Saw Blade Hard plastics - Abrasive materials - Finishing-cut / Thin-Cut 250x2,4/1,8x30mm 80 TFF-P- PH: UNI BESTSELLER
108.95