Pay in installments of $4.25 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 20 - Jul 25
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
MAYCO Stroke & Coat Blue Yonder GlazeBlue Yonder SC 011 Cone 06 oxidation: Blue Yonder is a heavily pigmented, viscous Stroke & Coat glaze that can be used for brush strokes or opaque coverage. One coat will create a translucent finish with subsequent coats adding opacity. We suggest two to three coats for full opacity and all over coverage. Will fire to a gloss finish without clear glaze. Cone 6 oxidation: Semi Transparent. Colour slightly lightens. Mayco Stroke & Coat is the industrys
Blue Yonder SC-011
Cone 06 oxidation: Blue Yonder is a heavily pigmented, viscous Stroke & Coat glaze that can be used for brush strokes or opaque coverage. One coat will create a translucent finish with subsequent coats adding opacity. We suggest two to three coats for full opacity and all over coverage. Will fire to a gloss finish without clear glaze.
Cone 6 oxidation: Semi-Transparent. Colour slightly lightens.
Mayco Stroke & Coat is the industry’s most versatile glaze, which can be the star of your work or play a supporting role to other glazes. It can be applied on greenware or bisque, fired from cone 06 to cone 10, in oxidation or reduction, and used in every decorative way imaginable. These heavily pigmented, viscous glazes can be applied as painterly brush strokes or achieve full opaque coverage. Because the liquid colour is consistent with the fired colour, artists will have no trouble visualizing finished results as they create. Stoke & Coat is a staple product for the studio, classroom, potter or fine artist.
FIRING
- Broad firing range from cone 06 (999°C) - cone 10 (1,305°C). Most will maintain their colour at higher temperatures. Performance at cone 6 is noted on each individual bottle. Some may blur when used in designs at mid range or high fire. We recommend testing on your clay and in your kiln prior to use.
- Food safe when fired correctly.
- Fires to a gloss finish without the need for clear glaze. Clear glaze can be added if additional glossiness is desired, or if Stroke & Coat has not been applied consistently to achieve overall coverage. Adding clear glaze to cone 5 and higher can affect the colour outcome and may cause designs to move and blur.
APPLICATION
- Can be applied on wet clay, greenware or bisque.
- Can be applied with a brush, a sponge, a detailer bottle, mats, or silkscreens.
- One coat of will create a translucent finish, with subsequent coats adding opacity.
- Use 2-3 coats for full opacity and all over coverage. Let dry between coats.
- Lighter colours can be used over dark colours, remaining bright and opaque, and will not blend with the colours underneath.
- At low-fire (including majolica techniques), glazes will not move or blend when used with other glazes. You can apply side-by-side or layer without losing the integrity of the design.
- For a more painterly approach, dilute glazes with water to create a thinned watercolour-like glaze. Use these tints to layer for seamless blending.
- Can be layered with other glazes to create unique effects.
- Suitable for a wide range of design techniques including sgraffito, stamping, slip trailing, marbling, majolica, and more.
- If you apply one coat of Stroke & Coat on top of a matte glaze, the Stroke & Coat will fire matte. By applying 2-3 coats, the Stroke & Coat will fire glossy.
Note: Tiles shown are fired flat on a white clay body fired to cone 06 / 6 oxidation and cone 10 reduction. The choice of clay body, the thickness of glaze application, the firing process, and temperature will affect the fired results.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 18 reviews
Sort
Product Reviews
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
Great value for price. Cute, lightweight. Could be used anywhere.
Size: 3 Panel, Color: White
Nice, lightweight. Good value for price. It's exactly what I needed for my hallway to keep my cats separate from each other. I used two zip ties to eyescrews in door trim and it opens up perfect to wall. Warm air gets thru and cats can see out/in. But can't get under or over. It's perfect for my use!!!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 23, 2025
★★★★★ 5
Great seller and really nice items!
Size: 6 Panel, Color: White
These room dividers are really lovely. They are great quality and just perfect for providing privacy in a sunroom while still allowing light in to keep the room sunny. I highly recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 24, 2026
★★★★★ 5
Nice divider!
Size: 4 Panel, Color: White
I use this as a "barrier" to keep my cat out of the guest room. I don't have to close the door anymore because the divider allows light and air through. Adds a nice touch to the decor, as well. Very lightweight and serves its purpose.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 3, 2026
★★★★★ 4
Good Room Divider
Size: 4 Panel, Color: White
This room divider worked great to mask my "utility area" in my living room because I'm low on storage space. It's functional and pleasing to the eye, but the quality could be better as there were pieces of debris on the unit and fraying strings. It also can tip over if not positioned just right. I do like the versatility of it though because even though it's a four panel I can fold in one of the panels and use the other three. Overall I like it, the price could be lower based on the quality but its good.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 30, 2025
recommand products
Ground Beef 10oz, Plain with Edamame and 1/4th Cup Cranberry Almond Quinoa
24.95
Ground Beef 7oz, Plain with Brussels Sprouts and 1/4th Cup Cranberry Almond Quinoa
18.95
Ground Beef 10oz, Plain with Zucchini & Squash and 1/4th Cup Cranberry Almond Quinoa
23.45
Ground Beef 9oz, Plain with Broccoli and 1/4th Cup Brown Rice + Avocado
22.95
Ground Beef 6oz, Plain with Zucchini & Squash and 1/4th Cup Brown Rice + Avocado
16.95