SPACE SAVER NETWORK CAT-6 Blank Half-U Shielded 24-Port Patch Panel 19" Rack Mount

SPACE SAVER NETWORK Unloaded Half-U Shielded 24-Port Patch Panel 19" Rack Mount 

Product Specifications 

Easy Install: Keystone-based patch panels insert with punch down blocks jack and punch down on a keystone jack much more easily than in a 110-patch panel, especially for limited rack space. Ideal solution for Ethernet, Fast Ethernet and Gigabit applications  

Flexibility for Future Remodel: Another flexibility benefits to going with keystone patch panel over a punch down 24 port patch panel cat6 is very easy to pop the keystones out of the panels and move them around for the inevitable remodel that maybe happen a few years after the wiring put in.  

Easy Repair: Keystones of cat 6 patch panel are punch down, just as an isolated unit, rather than 24 punch downs attached to the same frame. If you have trouble with a port, you can snap it out for inspection and then repair or replace it.  

Mixable Connectivity: Cat6 patch panel with keystone make it a lot easier to insert other connectivity within same Rackspace such as coax, fiber, HDMI, USB, whatever. You can also leave a few blanks on panel that used as cable passthroughs.  

Exquisite Details: Wall mount patch panel with punch down keystones come with a small punch tool in the package. Transparent keystone end caps secure cables in place and cable zip ties fasten ethernet cable onto back bar to less stress relief and avoid termination issues. Rj45 patch panel is equipped with gold plated keystone jacks which provide 10 Gigabit speed transmission performance. This modular patch panel meets or exceeds Cat6 specifications and can be instead of cat 5 panel. 

Product Description 

As any system administrator knows, server rack space is expensive. Make the most out of your limited rack space by using this high-density, SPACE SAVER NETWORK CAT-5E Half-U Shielded 24-Port Patch Panel 19" Rack Mount his shielded patch panel is designed for Category 5e STP/FTP cable connections. It is rated for 350 MHz bandwidth and 100 Mbps data throughput. It features 24 RJ45 ports with Dual IDC headers situated 180° relative to the ports. The IDC headers are terminated using a 110-type punch down tool. The panel is compatible with 22-26 AWG solid or stranded solid-state and network cables. The panel includes color coded wiring diagrams for both T568A and T568B installations. The panel includes a 16" grounding cable with a ring terminal. The patch panel measures 19" wide on the face and 17 1/4" wide on the body. It is 3 15/16" deep and 7/8" high. The frame features 24 C-shaped keyholes for cable strain relief. The packaging includes 24 3" zip ties, 2 rack mount screws, 2 plastic washers, 12 cable clamps, and 12 screws for the clamps. Note: Over torquing the rack mount screws can cause damage to the mounting ears. The plastic washers are intended to be used with the rack mount screws to reduce the chance of over tightening the installation. Features: High-density panel, packs 24 RJ45 ports into half the space of ordinary panels Suitable for use with solid or stranded 22-26AWG wire Krone-type punch-down termination with built-in strain relief bar Gold plated RJ45 contacts Ports clearly labeled on front Includes a color-coded wiring diagram for both T568A and T568B terminations. 

Product Information