Gedore 8471-01 DREMOMETER DXZ Torque Wrench, 520 - 1000 Nm

Gedore 8471-01 DREMOMETER DXZ Torque Wrench, 520 - 1000 NmGedore 8471 01 DREMOMETER DXZ 520 1000 Nm Classified to DIN EN ISO 6789: 2003 Type II Class A, with a factory certificate. Working accuracy: + 3 % tolerance of scale set torque. The specification of the standard (+ 4 %) is exceeded. Lightweight yet robust (as the housing is made of an aluminium alloy) and resilient, very workshop friendly Designed to be used with Gedore 28 mm round "Z" end fittings, allowing access from the front (e. g. open end

Gedore 8471-01 DREMOMETER DXZ

520 - 1000 Nm
Classified to DIN EN ISO 6789:2003 Type II Class A, with a factory certificate. Working accuracy: +/- 3 % tolerance of scale set torque. The specification of the standard (+/- 4 %) is exceeded.
Lightweight yet robust (as the housing is made of an aluminium alloy) and resilient, very workshop-friendly
Designed to be used with Gedore 28 mm round "Z" end fittings, allowing access from the front (e.g. open-end fitting) or side (e.g. reversible ratchet and socket)
Force to be applied in the middle of the handgrip only - do not use an extension tube as otherwise, inaccuracies can evolve (except for model DXZ where the DREMOMETER has been calibrated and adjusted using the extension tube)
Operation only with end fittings with standardised depth gauges, otherwise inaccuracies can arise. Keep the depth gauges on the certificate in mind. Only use original GEDORE accessories.
Large drive cross-section transfers maximum torques
Extremely low wear attributable to reduced forces in the lever mechanism
Forged lever chain from our own quality forge
Maximum precision even when subjected to extreme continuous use
Long life cycles and tool lives
Easy operation - fast and safe torque tightening
Easy adjustment thanks to attractive adjusting button secured against loss at the end of the handle
With certificate acc. to DIN EN ISO 6789, traceable via in-house DAkkS laboratory to national standards