Polaris Ranger XP1000/1000/Crew (2018-2024) - Ice Crusher Cab Heater
SKU: 18056905266

Polaris Ranger XP1000/1000/Crew (2018-2024) - Ice Crusher Cab Heater

$220.50 $245.00
Save 10%
No.2 Bestseller on communitymontessori.net >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 5 - Jul 10

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Polaris Ranger XP1000/1000/Crew (2018-2024) - Ice Crusher Cab HeaterSKU: ICCH UD C RNGR18XP1000 Availability: In Stock. This Ice Crusher Under Dash Heater kit has 8 vents and fits completely up under the dash area. This kit comes with a compact yet powerful heater with a three speed fan which will deliver heat from the 14,600 BTU* Compact Heater Unit. Modern automotive quality adjustable vents direct the heat were you need it. Two 2" vents mount in the center of the dash top to defrost the windshield, two 2 vents

SKU: ICCH-UD-C-RNGR18XP1000

Availability: In Stock. 


This Ice Crusher Under Dash Heater kit has 8 vents and fits completely up under the dash area. This kit comes with a compact yet powerful heater with a three speed fan which will deliver heat from the 14,600 BTU* Compact Heater Unit. Modern automotive quality adjustable vents direct the heat were you need it. Two 2" vents mount in the center of the dash top to defrost the windshield, two 2” vents mount in the center dash panel, two 2” vents mount in the dash panel above the side cup holders and two 2” vents mount in the lower dash area. Kit is also available with optional in dash Heat Control (shown in dash switch picture). A unique feature of our kit is that the heater intake comes from inside the cab where the air is cleaner and warmer. Warmer air means more available heat for you inside the cab. Kits are supplied with our custom CNC made alloy Y connectors that connect directly to the engines cooling system for fast heat (MaxStat  not required with this kit). Kits also include custom CNC laser cut mounting brackets, heater hoses and duct hoses, hose clamps, new and improved vents, hole saws (for the heater hoses and vents), grommets, switch, wiring loom and terminals included, templates, your specific mounting bracket with hardware, and instructions.

 Use your cooling system to heat your UTV's cab! From the original designer of the Firestorm UTV Cab Heaters comes our new and improved Ice Crusher Compact UTV Heaters. What make our heaters better, if not the best, is that you are dealing with the designer/manufacturer and most of the kits have been installed by us and fitment checked. We use modern automotive quality vents- not something that looks like is was made in the 50's so they match the modern styling of your UTV. Most of our kits use custom made solid CNC machined Y connection fittings, so there is no chance of leaking welds. We endeavor to use quality parts and hardware in all our kits.

 

Ice Crusher MaxStat - Inline Coolant Bypass Thermostat for UTV Heaters

  • The MaxStat directs all engine coolant to your Ice Crusher Cab Heater, this means that the output of your heater will be at its maximum. If there is heat in your cooling system then you will have heat from your Ice Crusher Cab Heater. More heat means a warmer cab and in turn a warmer you!
  • MaxStat only opens to let coolant flow though the radiator when the cooling system requires it to keep the UTV engine at an optimal temperature.  Look in the pics for a diagram showing how this option works and keeps you warmer in the winter, and your machine cooler in the summer.

*Heater BTU# output is theoretical and is dependent on the coolant temperature of the UTV and the flow rate of the coolant, which varies by UTV and engine RPM. Outside (ambient) temperature the UTV is being operated in also can change heater output. That being said these 14,600 BTU Heater Units are more that capable of heating 99.99% of all UTV's

#British Thermal Unit (BTU or Btu) is a traditional unit of work needed to raise the temperature of one pound of water by one degree Fahrenheit. One four-inch wooden kitchen match consumed completely generates approximately 1 BTU.

For Heater FAQ and Troubleshooting Click Here

Warranty:

Three year limited warranty. For Warranty Info Click Here

Shipping Details:

Please note: During the fall/winter season, lead time can be one week. We recommend ordering well in advance or calling us before ordering to get an accurate lead time. Free shipping is only to the lower 48 States. Orders shipped to AK and HI may incur extra shipping charges. Customers will be notified of any charges before shipment is shipped. Orders shipping to Canada will be charged a flat rate shipping fee of $60 when the order is processed. This does not include duties or taxes, which can be billed by UPS/FedEx/USPS and/or the Canadian Government, not Couper’s Products as we have no control over these. All prices are in US Dollars.

Returns:

Electrical items are not returnable. Any electrical returns MUST be authorized on a case by case basis or they will be refused. No returns considered after 30 days. Customer pays return shipping and 20% restocking fee. Returns must be returned in unused condition with original box, pieces, and instructions.

Free shipping with in the lower 48 states.


ecs 9-12-24


Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 18056905266

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 396 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
C
Computer
Birmingham, US
★★★★★ 4
Easy to assemble, does the job, material is shiny nylon and shows creases, minor defects, sloppy
Size: 3 Panel 12FT W, Size: 3 Panel 12FT W
The Siebwin room divider is a good idea, and for the price, it mostly delivers on the intended functionality. I ordered the 12 foot, 3-panel version mainly to hide an unfinished basement storage area that had become an eyesore. It works well for that purpose and gives the space a cleaner appearance without spending the kind of money that more decorative dividers or custom partitions cost. If you need something temporary, portable, or mainly functional, this is a viable option. There are a few limitations that became obvious during setup and use. The first thing I noticed was that the weld quality on some of the metal poles is fairly sloppy. Once the cover is installed, you do not really see it, but up close, it does not look especially refined or professional. The blackout material also is not a matte canvas style fabric as I expected. It has more of a shiny nylon appearance, and the creases are fairly visible. Being that it’s more of a nylon, I’d be hesitant to try steaming it to remove the creases. However, the creases do not matter if you are using it in a basement, dorm, or shared room, but for photography, video work, or a professional office setting, the appearance could be disappointing. The fabric is thick enough, though. It blocks visibility well enough, but strong light behind it still shows through to some extent, nothing deal-breaking. Also, my fabric appeared to be slightly defective. The hook and loop strip on one of the bottom sections was off-center and couldn't be totally attached because it was lined up with one of the legs. I originally hoped to use this as a video backdrop, but I will probably end up replacing the fabric with a proper green screen or canvas material while continuing to use the frame itself. For now, it does a good job of covering my basement junk. Assembly was actually easier than I expected and took roughly 15 to 20 minutes. The longer vertical poles are tethered together similarly to tent poles, which made setup straightforward and fairly intuitive. The shorter horizontal pieces slide and snap together to the top and bottom of the vertical assembly. After each section is assembled, the divider panels connect together with metal plates and two knurled screws (at the top and bottom), so no tools are really required. A few screws were difficult to start because paint had gotten into the threads, but once they caught, they tightened down normally. The feet install with similar knurled fasteners and help keep the divider reasonably stable. One thing to watch for during setup is the fabric orientation. There is one arrow indicator in the middle of the fabric to indicate up. However, if you need another indicator, the smaller hook and loop strip goes on the bottom while the longer strip goes on top. I realized mine was upside down right before finishing and had to redo it. I wasn't difficult to redo, despite the defect in mine. The overall design is practical and easy to move around. I do like that the panels can fold and bend into different shapes depending on the space. The widened feet help stability, although when trying to stretch the fabric tight, I noticed the poles sometimes wanted to overlap slightly at the joints. Tightening everything helped somewhat, but it still happened occasionally. The divider feels adequate for normal indoor use, though I would not expect premium durability or luxury-level fit and finish at this price point. The entire device can also be easily disabled and stored in a tote if you need it completely out of the way. It comes with assembly instructions, but even if you didn’t have them, it’s easy to build without them (save a mistake or two). In terms of value, I think the Siebwin divider mostly matches its price. Around $100 gets you a large freestanding partition with decent usability and easy assembly, but there are compromises in materials, appearance, and refinement. The defects are also off-putting, but hopefully you won't have them. Higher-end room dividers can easily cost two or three times more, so some of the tradeoffs are expected. I also noticed cheaper alternatives online, but based on the quality here, I suspect those would probably have even more issues. For practical home use, temporary privacy, hiding storage areas, or separating shared spaces, this is a good option as long as expectations stay realistic.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
T
Trendy Tales
Fort Morgan, US
★★★★★ 3
Works well but takes up more space than expected
Size: 2 Panel 8FT W, Size: 2 Panel 8FT W
This room divider does the job for creating a little extra privacy and was easy enough to set up. The panels feel decent quality and the wider feet help keep it more stable than some cheaper screens I’ve tried. My only issue is that it takes up a bit more room than I expected, especially with the feet sticking out. It’s still portable and folds away nicely, but definitely measure your space first. Overall it works well for separating a room or blocking off an area temporarily. i wish it came in other colors
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
K
Katrina Rhodes
Carnegie, US
★★★★★ 5
Nice divider, serves it's purpose well!
Size: 3 Panel 12FT W
This room divider worked out very well for what I needed. I wanted a simple way to create a little more privacy and separation in a larger room without doing anything permanent, and this divider was an easy solution. The panels provide good coverage, and the black color gives it a clean, modern appearance that blends in nicely with different décor styles. Assembly was fairly straightforward, and once set up, the wider feet helped keep the divider stable on the floor. I was especially happy with how flexible the panels are to arrange. You can keep it mostly straight, angle it around furniture, or create a more enclosed private space depending on the layout you need. The material allows light to filter through slightly while still offering a noticeable sense of privacy. I’ve used it for separating a workspace area, but it would also work well in bedrooms, apartments, dorms, studios, or shared living spaces. Another plus is that it can be folded and moved without too much effort when you want to change the setup. Overall, this divider delivers a good balance of functionality, portability, and appearance. It’s a practical option for anyone needing temporary room separation without installing permanent walls or curtains.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
J
Jamie K.
Omaha, US
★★★★★ 5
Perfect for Adding Privacy to a Piano Studio
Size: 2 Panel 8FT W, Size: 2 Panel 8FT W
I Ordered the 2 Panel version which is way too big for my needs... that's on me. So keep in mind that the picture shows a fabric made for two panels only being used on one and hence it is not pulled tight; it would pull tight and not be so wrinkly if it was set up properly as two panels. The metal pools that make up the panels seem to be well made, stable, and of good quality. They were very easy to put together and they stand up tall with plenty of height. The appearance of it with the fabric on it isn't as elegant as it could be, but it still looks good enough. The material is plenty solid, not allowing light through it, and thereby making a solid barrier. I am using it to block the view out the studio door when a student is sitting at the piano to avoid distractions from the hallway. It will allow a student to enter the studio with our distracting the student who is at the piano.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
J
Just Me
Massapequa, US
★★★★★ 5
Room Divider That Gives Instant “This Is a Separate Space Now” Energy
Size: 3 Panel 12FT W
The Siebwin 3 Panel Folding Privacy Screen is surprisingly effective at changing the feel of a room without requiring construction, commitment, or somebody yelling about load bearing walls. The 12 foot width gives a substantial amount of coverage, making it useful for creating privacy, dividing open areas, blocking visual clutter, or setting up temporary sections within larger rooms. This saved us a ton of time and money in our new studio and enabled us to create a kitchen and office in one room. The wider feet make a huge difference because flimsy room dividers that collapse every time someone exhales too aggressively are deeply annoying. This one feels more stable and grounded once positioned. The folding design makes it easy to move around or adjust depending on the space, and it folds down relatively compactly when not in use. It is basically the introvert curtain wall of dreams. The material has a clean, neutral look that blends well into different room styles without screaming “temporary office cubicle panic.” It works well for apartments, studios, shared spaces, dressing areas, or simply hiding the mountain of chaos you swear you are going to organize tomorrow. Practical, portable, and refreshingly easy to use without turning setup into a three hour emotional event.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 16, 2026

recommand products

MAGNIFYING GLASS-HS385
80.00
CHARM L6-PEACH
125.00
MOON 80 -
1882.50
BRASS RING 13X20
275.00
OUTDOOR: JUNE CANDLE THREE MARRAKESH NEUTRAL + LID
168.00