Irritec Multibar C drip hose, 16 mm, drippers 1.6 l/h per 30 cm, l = 50 m

Irritec Multibar C drip hose, 16 mm, drippers 1.6 l/h per 30 cm, l = 50 mDrip hose for drip irrigation of plants, hedges, trees, etc. The advantage of drip irrigation is that water evaporation is minimal, and there is no water wastage by unnecessary areas such as paved surfaces being watered. This type, Multibar C, is also ideal for irrigation in areas with significant elevation differences, where very long pipelines, constant flow rates in every part of the system, and high delivery precision are required. The drip hose

Drip hose for drip irrigation of plants, hedges, trees, etc. The advantage of drip irrigation is that water evaporation is minimal, and there is no water wastage by unnecessary areas such as paved surfaces being watered. This type, Multibar C, is also ideal for irrigation in areas with significant elevation differences, where very long pipelines, constant flow rates in every part of the system, and high delivery precision are required.

The drip hose is pressure-compensated, meaning that each dripper releases the same amount of water, regardless of pressure variations. If the drippers were not pressure-compensating, more water would flow out of the openings at the beginning of the hose than at the end of the hose.

The hose has an outer diameter of 16 mm and a roll length of 50 meters. A dripper is installed every 30 cm in the hose.
The drip hose is suitable for a water pressure of 0.5 to 4 bar. The maximum length of the hose is dependent on the pressure. If the maximum hose length is exceeded, water will not drip evenly from each dripper.

The water output is 1.6 liters per hour per dripper.

Due to the water supply, where the source is different from the water pipe, dirt can enter the drip hose. To prevent clogging of the drippers, it is recommended to install a filter with a 125-micron rating.

Features and benefits

• Ideal for irrigation of multi-season crops.
• The drip pressure compensating system is guaranteed by a silicone membrane that maintains a constant flow rate while varying the working pressure.
• Suitable for sloped terrain and uneven landscapes.
• The unique design of the dripper allows for efficient pressure compensation over a wide range.
• Perfect dosing of fertilizers in every part of the system.
• Drip hose with two emission holes in the opposite position (applies to all cylinders) that prevent the intake of impurities, for easy installation.

Complete range of drip hoses

With us, you will find a complete range of drip hoses. Our product specialists are happy to assist you with personalized advice.