Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 4 - Jul 9
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
9 Inches Propeller Safety Guard for 9.9HP to 20HP Outboard MotorsPropeller Safety Guard Fits 9. 9HP to 20HP Outboard Motors This propeller safety guard is designed for a universal fit on most 9. 9HP to 20HP outboard motors, including models from Mercury, Yamaha, Johnson Evinrude, Honda, Suzuki, and Tohatsu Nissan. It provides a protective cage around the propeller to significantly reduce the risk of injury to swimmers and marine life, and helps prevent damage to the propeller in shallow, rocky waters. Engineered
Propeller Safety Guard – Fits 9.9HP to 20HP Outboard Motors
This propeller safety guard is designed for a universal fit on most 9.9HP to 20HP outboard motors, including models from Mercury, Yamaha, Johnson/Evinrude, Honda, Suzuki, and Tohatsu/Nissan. It provides a protective cage around the propeller to significantly reduce the risk of injury to swimmers and marine life, and helps prevent damage to the propeller in shallow, rocky waters.
Engineered for durability and safety, this guard is an essential accessory for family boats, rental fleets, and any vessel operating near people or underwater hazards.
- Material: Constructed from rigid, high-impact polypropylene plastic in Safety Yellow for maximum visibility.
- Installation: Mounts directly to the outboard's lower unit, requiring drilling for a secure fit on the cavitation plate and skeg.
- Included: Comes with one 9" propeller guard and a complete set of stainless steel mounting hardware.
Compatible Engine Models
Confirm your engine model/year in the table below. For Mercury owners, here’s a guide to help you identify your engine’s serial/model: Mercury Serial Number Guide. You can also review exploded diagrams to verify part numbers: Mercury Parts Diagrams & Catalog.
Confirm your engine model/year in the table below. For Yamaha owners, here’s a guide to help you identify your engine’s serial/model: Yamaha Serial Number Guide. You can also review exploded diagrams to verify part numbers: Yamaha Parts Diagrams & Catalog.
Confirm your engine model/year in the table below. For Johnson/Evinrude owners, here’s a guide to help you identify your engine’s serial/model: Johnson Serial Number Guide.
Confirm your engine model/year in the table below. For Suzuki owners, You can review exploded diagrams here to verify part numbers: Suzuki Parts Diagrams & Catalog.
| Brand | Model | Rated HP | Stroke | Notes |
|---|---|---|---|---|
| Mercury | All Models | 9.9-20 | 2- & 4-Stroke | Except Big Foot & High Thrust models (require 11" guard) |
| Yamaha | All Models | 9.9-20 | 2- & 4-Stroke | Except Big Foot & High Thrust models (require 11" guard) |
| Johnson/Evinrude | All Models | 9.9-20 | 2- & 4-Stroke | Except Big Foot & High Thrust models (require 11" guard) |
| Honda | All Models | 9.9-20 | 2- & 4-Stroke | Except Big Foot & High Thrust models (require 11" guard) |
| Suzuki | All Models | 9.9-20 | 2- & 4-Stroke | Except Big Foot & High Thrust models (require 11" guard) |
| Tohatsu/Nissan | All Models | 9.9-20 | 2- & 4-Stroke | Except Big Foot & High Thrust models (require 11" guard) |
Technical Specifications
| Specification | Value |
|---|---|
| Product Type | Outboard Propeller Guard / Safety Guard |
| Installation | Bolts to cavitation plate and skeg |
| Connection | Mounting hardware included (stainless steel bolts) |
| Housing Material | Rigid polypropylene plastic |
| Housing Color | Safety Yellow |
| Dimensions | 32 × 29 × 18 cm (overall package dimensions) |
| Weight | 1.495 kg (3.3 lbs) |
| Fitting Type | Direct mount to outboard lower unit |
| Guard Diameter | 9" (fits propellers up to 8.5") |
Package Contents
- 1 x Propeller Guard (9" Yellow)
- 1 x Set of Mounting Hardware (stainless steel)
- 1 x Installation Instructions
Installation Guide
- Ensure the engine is turned off and the boat is securely positioned out of the water.
- Place the guard over the propeller, aligning it correctly with the cavitation plate and skeg.
- Carefully mark the positions for drilling on the cavitation plate and skeg.
- Drill holes at the marked locations using an appropriately sized bit for the included bolts.
- Attach the propeller guard using the supplied stainless steel mounting hardware.
- Firmly tighten all bolts and verify the guard is secure and properly aligned around the propeller.
Troubleshooting & FAQ
Q: How do I confirm this guard fits my 9.9-20HP motor?
A: This 9" guard is designed for most 9.9HP to 20HP outboard motors that use a propeller up to 8.5 inches in diameter. It is not compatible with "Big Foot" or "High Thrust" models, as those require a larger 11" guard. Always measure your propeller diameter to ensure compatibility before purchasing.
Q: How is the propeller guard installed?
A: Installation requires drilling into your outboard's cavitation plate and skeg to create secure mounting points. The package includes all necessary stainless steel hardware and instructions to complete the installation.
Q: What is the guard made of?
A: The guard is constructed from a durable, rigid polypropylene plastic. It comes in a high-visibility Safety Yellow color to enhance underwater awareness and safety.
Q: OEM vs. Aftermarket?
A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.
Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.
Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.
Important Notes
- Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
- This product is an aftermarket replacement part and is not an OEM component.
- Professional installation is recommended to ensure safety and optimal performance.
Why Choose JLM MARINE?
- Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
- Fast Global Shipping: Free delivery worldwide in 5–15 days.
- Direct from Manufacturer: Competitive pricing without compromising quality.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy